NTE7018

NTE701 : The NTE701 is a monolithic integrated circuit TV signal processor in a 16–Lead DIP type package designed for use in color or monochrome receivers. Circuit functions include a horizontal oscillator with AFC, a sync separator, and a key AGC system. The AGC system provides output signals for IF (reverse) and tuner (forward and/or reverse). The wide frequency–range horizontal oscillator has high stability at 503.3kHz. Features: D Horizontal Oscillator with AFC D Sync Separator with Noise Immunity D Strobed AGC System D IF AGC Output D Delayed Outputs for Forward or Reverse AGC Tuners D Internal Noise Threshold D High–Impedance Video Input D RF AGC Delay Externally Controlled D Output Short–Circ.

NTE7010 : The NTE7010 combines all the functions required for an NTSC color TV system in a 54–Lead DIP type package. This device includes PIF/SIF circuits, video/chroma/deflection circuits, chroma band pass filters, red and green OSD interfaces, and 1 channel audio video switches. PIF Circuits D 3–Stage Variable–Gain PIF Amplification Stage D High–Speed Response ACC with Dual Time Constants (Peak AGC) D Single End AFT Output with Defeat Function D RF Delay AGC Output (Reverse AGC) D Sync. Negative Detected Video Output Polarity D Internal Black/White Noise Inverter SIF Circuits D 3–Stage Limiter Amplification Stage D Quadrature FM Detector Circuit with Sound Mute Function D 1 Channel External Audio I.

NTE7011 : The NTE7011 is an integrated circuit in a 12−Lead SIP type package designed for use as a BTL power amplifier with built−in headphone amp for portable stereo applications. Typical applications include portable component stereos, car stereo, radio cassette recorders, and TV sound multiplex output. Features: D Low Quiescent Current, Low Distortion, Low Noise, High Output Power D Wide Supply Voltage range: VCC = 6 to 26V D Built−In Muting Circuit D Built−In Protection Circuits: Temperature, Surge, Overcurrent D Built−In Headphone Amplifier Circuit Absolute Maximum Ratings: (TA = +25°C unless otherwise specified) Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..

NTE7013 : The NTE7013 is a bipolar integrated circuit in an 8–Lead DIP type package intended for infrared remote control applications. This device has an active “Low” output polarity and contains a high–gain amplifier, a limiter amplifier, a band–pass filter, a detector, and a pulse shaper. Features: D On–Chip Band–Pass Filter: Frequenct Range 30 to 60kHz D High Gain Pre–Amplifier: 86dB Typ D Detector for PCM Demodulation D Low Current Consumption D Minimum External Components Absloute Maximum Ratings: (TA = +25°C unless otherwise specified) Supply Voltage (Rg = 0Ω), VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.6V Output Voltage, VO.

NTE7016 : The NTE7016 is a monolithic integrated circuit that provides all the functions of a comprehensive FM– IF system. This device includes a three–stage FM–IF amplifier/limiter configuration with level detectors for each stage, a doubly–balanced quadrature FM detector, and an audio amplifier that features the optional use of a muting (squelch) circuit. The advanced circuit design of the IF system includes desirable deluxe features such as programmable delayed AGC for the RF tuner, an AFC drive circuit, and an output signal to drive a tuning meter and/or provide stereo switching logic. In addition, internal power supply regulators maintain a nearly constant current drain over the voltage supply r.

NTE7019 : The NTE7019 is an integrated circuit in a 16–Lead DIP type package developed to facilitate the Phase Lock Loop (PLL) digital tuning system interface for TV systems. Since all the peripheral blocks are incorporated into this device, the number of peripheral parts can be greatly reduced. Features: D All–in–One Chip Incorporating the Peripheral Blocks of the PLL System D Built–In Synchronized Separate for Channel Detecting Circuit D Externally Controllable Channel Detection Level D High Current Low–Saturation–Voltage Band Switch Output: VO(sat) = 0.3V Typ @ IOH = –40mA D Built–In Channel Tuning Voltage: 34V Typ Absolute Maximum Ratings: (TA = +25°C unless otherwise specified) Supply Voltage, V.