Part Number
|
2961 |
Manufacturer
|
Allegro MicroSystems |
Description
|
HIGH-CURRENT HALF-BRIDGE PRINTHEAD/MOTOR DRIVER |
Published
|
May 28, 2005 |
Detailed Description
|
2961 HIGH-CURRENT HALF-BRIDGE PRINTHEAD/MOTOR DRIVER
2961
The UDN2961B and UDN2961W are 3.4 A half bridges designed spe...
|
Datasheet
|
2961
|
Overview
2961 HIGH-CURRENT HALF-BRIDGE PRINTHEAD/MOTOR DRIVER
2961
The UDN2961B and UDN2961W are 3.
4 A half bridges designed specifically for driving solenoid printheads, stepper motors, and dc motors.
The UDN2961B/W consists of a power source driver output, a power sink driver output, a flyback recovery diode, internal current sensing circuitry, and a user-selectable fixed off-time chopper circuit.
The output drivers are capable of sustaining 45 V with continuous currents of ±3.
4 A and peak transient currents of ±4 A permitted.
The outputs have been optimized for a low output saturation voltage (typically 2.
6 V total source plus sink drops at 3.
4 A).
For output current control, load current is sens...
Similar Datasheet