Part Number
|
MAX4094 |
Manufacturer
|
Maxim |
Description
|
Single/Dual/Quad / Micropower / Single-Supply / Rail-to-Rail Op Amps |
Published
|
Jun 13, 2005 |
Detailed Description
|
19-2272; Rev 0; 1/02
Single/Dual/Quad, Micropower, Single-Supply, Rail-to-Rail Op Amps
General Description
The single M...
|
Datasheet
|
MAX4094
|
Overview
19-2272; Rev 0; 1/02
Single/Dual/Quad, Micropower, Single-Supply, Rail-to-Rail Op Amps
General Description
The single MAX4091, dual MAX4092, and quad MAX4094 operational amplifiers combine excellent DC accuracy with Rail-to-Rail® operation at the input and output.
Since the common-mode voltage extends from VCC to VEE, the devices can operate from either a single supply (2.
7V to 6V) or split supplies (±1.
35V to ±3V).
Each op amp requires less than 130µA of supply current.
Even with this low current, the op amps are capable of driving a 1kΩ load, and the input-referred voltage noise is only 12nV/√Hz.
In addition, these op amps can drive loads in excess of 2000pF.
The precision performance of ...
Similar Datasheet