Part Number
|
WD1004-27x |
Manufacturer
|
Western Digital |
Description
|
Winchester Disk Controller Boards |
Published
|
Jun 15, 2005 |
Detailed Description
|
READ THIS FIRST
INSTALLATION GUIDE WD1004-27X WD1004A-27X Winchester Disk Controller Boards
FEBRUARY 1989
IDENTIFY DRI...
|
Datasheet
|
WD1004-27x
|
Overview
READ THIS FIRST
INSTALLATION GUIDE WD1004-27X WD1004A-27X Winchester Disk Controller Boards
FEBRUARY 1989
IDENTIFY DRIVE
The WD1004-27X and WD1004A-27X boards work with any hard disk drive that has the ST506/412 drive interface and no more than 1024 cylinders and 16 heads.
The Seagate 238 hard disk drive unit is such a drive.
Look in your drive manual to verify that you have an ST506/412 RLL drive or check with your dealer.
Then check the drive manual for the drive parameters, such as those listed in Table 1-1.
You'll need this information to select the proper low level format.
Table 1-1.
WD1004 and WD1004A Default Drive Parameters Formatted Number of Number of Sectors per Capacity Heads C...
Similar Datasheet