Part Number
|
WD1004A-WXI |
Manufacturer
|
Western Digital |
Description
|
Winchester Disk Controller Boards |
Published
|
Jun 15, 2005 |
Detailed Description
|
READ THIS FIRST
INSTALLATION GUIDE
WD1004A-WXl Winchester Disk Controller Board FEBRUARY 1989
IDENTIFY DRIVE
The WD100...
|
Datasheet
|
WD1004A-WXI
|
Overview
READ THIS FIRST
INSTALLATION GUIDE
WD1004A-WXl Winchester Disk Controller Board FEBRUARY 1989
IDENTIFY DRIVE
The WD1004A-WX1 board works with any hard disk drive that has the ST506/412 drive interface and no more than 1024 cylinders and 16 heads.
The Seagate 225 hard disk drive unit is such a drive.
Look in your drive manual to verify that you have an ST506/412 MFM drive or check with your dealer.
Then check the drive manual for the drive parameters, such as those listed in Table 1-1.
You'll need this information for the low level format.
Table 1-1 WD1004A-WX1 Default Drive Parameters Formatted Capacity 21MB Number of Heads 4 Number of Cylinders 615 Pre–Comp RWC 307/none Step Rate 75µsec
...
Similar Datasheet