| Part Number | CS52015-1 |
| Manufacturer | ON Semiconductor |
| Title | Linear Regulator |
| Description | Package Pin Number TO−220−3 1 2 3 D2PAK−3 1 2 3 SOT−223 1 2 3 Pin Symbol Adj VOUT VIN Function Adjust pin (low side of the internal reference). Re... |
| Features |
• Output Current to 1.5 A • Output Accuracy to ±1.0% Over Temperature • Dropout Voltage (typical) 1.05 V @ 1.5 A • Fast Transient Response • Fault Protection − Current Limit − Thermal Shutdown 5.0 V VIN VOUT http://onsemi.com TO−220−3 T SUFFIX CASE 221A 1 2 3 D2PAK−3 DP SUFFIX CASE 418AB Tab = ... |
| File Size | 268.76KB |
| Datasheet |
|
CS52015-1 : The CS52015-1 linear regulator provides 1.5A with an accuracy of ±1%. The device uses two external resistors to set the output voltage within a 1.25V to 5.5V range. The regulator is intended for use as a post regulator and microprocessor supply. The fast loop response and low dropout voltage make this regulator ideal for applications where low voltage operation and good transient response are important. The circuit is designed to operate with dropout voltages less than 1.4V at 1.5A output current. Device protection includes overcurrent and thermal shutdown. The CS52015-1 is pin compatible with the LT1086 family of linear regulators but has lower dropout voltage. The regulator is available in.
CS52015-3 : The CS52015-3 linear regulator provides 1.5A at 3.3V with an output voltage accuracy of ±1.5%. The regulator is intended for use as a post regulator and microprocessor supply. The fast loop response and low dropout voltage make this regulator ideal for applications where low voltage operation and good transient response are important. The circuit is designed to operate with dropout voltages less than 1.4V at 1.5A output current. The maximum quiescent current is only 10mA at full load. Device protection includes overcurrent and thermal shutdown. The CS52015-3 is pin compatible with the LT1086 family of linear regulators but has lower dropout voltage. The regulator is available in TO220, surfa.
CS52015-3 : Package Pin Number TO−220−3 1 2 3 D2PAK−3 1 2 3 SOT−223 1 2 3 Pin Symbol GND VOUT VIN Ground connection. Regulated output voltage (case). Input voltage. Function http://onsemi.com 2 CS52015−3 VIN VOUT Output Current Limit Thermal Shutdown Bandgap GND − + Error Amplifier Figure 2. Block Diagram TYPICAL PERFORMANCE CHARACTERISTICS 1.05 Output Voltage Deviation (%) 1500 0.10 0.08 0.06 0.04 0.02 0.00 −0.02 −0.04 −0.06 −0.08 −0.10 −0.12 1.00 VDROPOUT (V) 0.95 0.90 0.85 0.80 0.75 TCASE = 0°C TCASE = 25°C TCASE = 125°C 0 300 600 900 1200 0 10 20 30 40 50 60 70 80 90 100 110 120 130 IOUT (mA) TJ (°C) Figure 3. Dropout Voltage vs. Output Current 85 75 Ripple Rejection (dB) 65 ISC.