Part Number
|
AT25DF041A |
Manufacturer
|
ATMEL Corporation |
Description
|
4-megabit 2.7-volt Only Serial Firmware DataFlash Memory |
Published
|
Apr 27, 2007 |
Detailed Description
|
Features
• Single 2.7V - 3.6V Supply • Serial Peripheral Interface (SPI) Compatible
– Supports SPI Modes 0 and 3
• 70 M...
|
Datasheet
|
AT25DF041A
|
Overview
Features
• Single 2.
7V - 3.
6V Supply • Serial Peripheral Interface (SPI) Compatible
– Supports SPI Modes 0 and 3
• 70 MHz Maximum Clock Frequency • Flexible, Uniform Erase Architecture
– 4-Kbyte Blocks – 32-Kbyte Blocks – 64-Kbyte Blocks – Full Chip Erase Individual Sector Protection with Global Protect/Unprotect Feature – One 16-Kbyte Top Boot Sector – Two 8-Kbyte Sectors – One 32-Kbyte Sector – Seven 64-Kbyte Sectors Hardware Controlled Locking of Protected Sectors Flexible Programming Options – Byte/Page Program (1 to 256 Bytes) – Sequential Program Mode Capability Automatic Checking and Reporting of Erase/Program Failures JEDEC Standard Manufacturer and Device ID Read Methodology Low Po...
Similar Datasheet