Part Number
|
AVR-PG1B |
Manufacturer
|
ETC |
Description
|
10 pin ICSP AVR Microcontroller Programmer |
Published
|
Dec 23, 2008 |
Detailed Description
|
AVR-PG1B (SERIAL PORT) 10 PIN ICSP AVR MICROCONTROLLER PROGRAMMER
Features: AVR-P1B is low cost serial port programmer ...
|
Datasheet
|
AVR-PG1B
|
Overview
AVR-PG1B (SERIAL PORT) 10 PIN ICSP AVR MICROCONTROLLER PROGRAMMER
Features: AVR-P1B is low cost serial port programmer for AVR microcontrollers with following features: - Connects to RS232 port - Uses target board power supply so no need for external power supply
com
Programming: AVR-PG1B works with PonyProg software by from Claudio Lanconelli and the latest release may be download for free from http://www.
lancos.
com ICSP interface: The ICSP connector is 2x5 pin with 0,1" step and Atmel STKxxx compatible layout.
The PIN.
1 is marked with square pad on bottom and arrow on top.
ICSP signals are: 1- MOSI, 2- VCC, 3- NC, 4- GND, 5- RST, 6- GND, 7- SCK, 8- GND, 9MISO, 10- GND ICS...
Similar Datasheet