Part Number
|
NX3L1T384 |
Manufacturer
|
NXP |
Description
|
Single-pole Single-throw Analog Switch |
Published
|
Dec 17, 2009 |
Detailed Description
|
NX3L1T384
Low-ohmic single-pole single-throw analog switch
Rev. 3.1 — 17 October 2016
Product data sheet
1. General ...
|
Datasheet
|
NX3L1T384
|
Overview
NX3L1T384
Low-ohmic single-pole single-throw analog switch
Rev.
3.
1 — 17 October 2016
Product data sheet
1.
General description
The NX3L1T384 is a low-ohmic single-pole single-throw analog switch.
It has two input/output terminals (Y and Z) and an active LOW enable input pin (E).
When E is HIGH, the analog switch is turned off.
Schmitt trigger action at the enable input (E) makes the circuit tolerant to slower input rise and fall times.
A low input voltage threshold allows pin E to be driven by lower level logic signals without a significant increase in supply current IC C.
This makes it possible for the NX3L1T384 to switch 4.
3 V signals with a 1.
8 V digital controller, eliminating the n...
Similar Datasheet