Part Number
|
U74HCT374 |
Manufacturer
|
Unisonic Technologies |
Description
|
OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS |
Published
|
Nov 6, 2012 |
Detailed Description
|
UNISONIC TECHNOLOGIES CO., LTD U74HCT374
OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS
DESCRIPTION
CMOS...
|
Datasheet
|
U74HCT374
|
Overview
UNISONIC TECHNOLOGIES CO.
, LTD U74HCT374
OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS
DESCRIPTION
CMOS IC
The U74HCT374 is a octal edge-triggered D-type flip-flops with 3-state outputs and it has 8 channels.
When the OE input is low, on the positive transition of the clock (CLK) input, the Q outputs are set to the logic levels of the data (D) inputs.
When the OE input is high, the outputs are in the high-impedance.
To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pull-up resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
TSSOP-20
FEATURES
* Inputs are TTL-Volta...
Similar Datasheet