SMC30A

SMC30 : LITE-ON SEMICONDUCTOR SMC SERIES STAND-OFF VOLTAGE - 6.8 to 200 Volts POWER DISSIPATION - 1500 WATTS SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS FEATURES Rating to 200V VBR For surface mounted applications Reliable low cost construction utilizing molded plastic technique Plastic material has UL flammability classification 94V-O Typical IR less than 1uA above 10V Fast response time: typically less than 1.0ps for Uni-direction,less than 5.0ns for Bi-direction,form 0 Volts to BV min SMC SMC A DIM. A B C B C D E F MIN. 6.60 5.59 2.92 0.15 7.75 0.05 2.01 0.76 MAX. 7.11 6.22 3.18 0.31 8.13 0.20 2.62 1.52 MECHANICAL DATA Case : Molded plastic Polarity : by cath.

SMC30 : GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSORS SMC5.0 THRU SMC170CA Stand-off Voltage Peak Pulse Power 5.0 to 170 Volts 1500 Watts FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-0 • For surface mounted applications in order to optimize board space • Low profile package • Built-in strain relief • Glass passivated junction • Low inductance • 1500W peak pulse power capability with a 10/1000μs waveform, repetition rate (duty cycle): 0.01% • Excellent clamping capability • Fast response time: typically less than 1.0ps from 0 Volts to V(BR) for unidirectional and 5.0ns for bidirectional types • For devices with V(BR)≥10V, ID are typically less .

SMC3054 : 20V N-Channel Enhancement Mode MOSFET ■FEATURE The SMC3054 is the N-Channel logic enhancement mode power field effect transistor is produced using high cell density. advanced trench technology to provide excellent RDS(ON).low gate charge and operation gate as 1.8V. This device is suitable for use as a load switch or other general applications. SMC3054S-TRG ROHS Compliant This is Halogen Free  20V/6.0A, RDS(ON) =24mΩ(typ.)@VGS =4.5V  20V/4.0A, RDS(ON) =28mΩ(typ.)@VGS =2.5V  20V/2.8A, RDS(ON) =38mΩ(typ.)@VGS =1.8V  Super high density cell design for extremely low RDS(ON)  Exceptional on-resistance and Maximum DC current capability ■APPLICATIONS  Power Management in Note book  Porta.

SMC3056 : 20V N-Channel Enhancement Mode MOSFET ■FEATURE The SMC3056 is the N-Channel logic enhancement mode power field effect transistor is produced using high cell density. advanced trench technology to provide excellent RDS(ON).low gate charge and operation gate as 1.8V. This device is suitable for use as a load switch or other general applications. SMC3056S-TRG ROHS Compliant This is Halogen Free  20V/6.0A, RDS(ON) =22mΩ(typ.)@VGS =4.5V  20V/4.0A, RDS(ON) =27mΩ(typ.)@VGS =2.5V  20V/2.8A, RDS(ON) =35mΩ(typ.)@VGS =1.8V  Super high density cell design for extremely low RDS(ON)  Exceptional on-resistance and Maximum DC current capability ■APPLICATIONS  Power Management in Note book  Porta.

SMC30A : GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSORS SMC5.0 THRU SMC170CA Stand-off Voltage Peak Pulse Power 5.0 to 170 Volts 1500 Watts FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-0 • For surface mounted applications in order to optimize board space • Low profile package • Built-in strain relief • Glass passivated junction • Low inductance • 1500W peak pulse power capability with a 10/1000μs waveform, repetition rate (duty cycle): 0.01% • Excellent clamping capability • Fast response time: typically less than 1.0ps from 0 Volts to V(BR) for unidirectional and 5.0ns for bidirectional types • For devices with V(BR)≥10V, ID are typically less .

SMC30C : LITE-ON SEMICONDUCTOR SMC SERIES STAND-OFF VOLTAGE - 6.8 to 200 Volts POWER DISSIPATION - 1500 WATTS SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS FEATURES Rating to 200V VBR For surface mounted applications Reliable low cost construction utilizing molded plastic technique Plastic material has UL flammability classification 94V-O Typical IR less than 1uA above 10V Fast response time: typically less than 1.0ps for Uni-direction,less than 5.0ns for Bi-direction,form 0 Volts to BV min SMC SMC A DIM. A B C B C D E F MIN. 6.60 5.59 2.92 0.15 7.75 0.05 2.01 0.76 MAX. 7.11 6.22 3.18 0.31 8.13 0.20 2.62 1.52 MECHANICAL DATA Case : Molded plastic Polarity : by cath.

SMC30CA : LITE-ON SEMICONDUCTOR SMC SERIES STAND-OFF VOLTAGE - 6.8 to 200 Volts POWER DISSIPATION - 1500 WATTS SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS FEATURES Rating to 200V VBR For surface mounted applications Reliable low cost construction utilizing molded plastic technique Plastic material has UL flammability classification 94V-O Typical IR less than 1uA above 10V Fast response time: typically less than 1.0ps for Uni-direction,less than 5.0ns for Bi-direction,form 0 Volts to BV min SMC SMC A DIM. A B C B C D E F MIN. 6.60 5.59 2.92 0.15 7.75 0.05 2.01 0.76 MAX. 7.11 6.22 3.18 0.31 8.13 0.20 2.62 1.52 MECHANICAL DATA Case : Molded plastic Polarity : by cath.

SMC30J100A : The SMC30J TVS series are designed to protect sensitive equipment against electrostatic discharges according to IEC 61000-4-2, MIL STD 883 Method 3015, and electrical overstress such as IEC 61000-4-4 and 5. They are used for surges below 3000 W 10/1000 μs. This planar technology makes it compatible with high-end equipment and SMPS where low leakage current and high junction temperature are required to provide reliability and stability over time. DS8598 - Rev 8 - January 2024 For further information contact your local STMicroelectronics sales office. www.st.com SMC30JxxA, SMC30JxxCA Characteristics 1 Characteristics Table 1. Absolute maximum ratings (Tamb = 25 °C) Symbol VPP PPP Tstg T.

SMC30J100CA : The SMC30J TVS series are designed to protect sensitive equipment against electrostatic discharges according to IEC 61000-4-2, MIL STD 883 Method 3015, and electrical overstress such as IEC 61000-4-4 and 5. They are used for surges below 3000 W 10/1000 μs. This planar technology makes it compatible with high-end equipment and SMPS where low leakage current and high junction temperature are required to provide reliability and stability over time. DS8598 - Rev 8 - January 2024 For further information contact your local STMicroelectronics sales office. www.st.com SMC30JxxA, SMC30JxxCA Characteristics 1 Characteristics Table 1. Absolute maximum ratings (Tamb = 25 °C) Symbol VPP PPP Tstg T.

SMC30J10A : The SMC30J TVS series are designed to protect sensitive equipment against electrostatic discharges according to IEC 61000-4-2, MIL STD 883 Method 3015, and electrical overstress such as IEC 61000-4-4 and 5. They are used for surges below 3000 W 10/1000 μs. This planar technology makes it compatible with high-end equipment and SMPS where low leakage current and high junction temperature are required to provide reliability and stability over time. DS8598 - Rev 8 - January 2024 For further information contact your local STMicroelectronics sales office. www.st.com SMC30JxxA, SMC30JxxCA Characteristics 1 Characteristics Table 1. Absolute maximum ratings (Tamb = 25 °C) Symbol VPP PPP Tstg T.

SMC30J10CA : The SMC30J TVS series are designed to protect sensitive equipment against electrostatic discharges according to IEC 61000-4-2, MIL STD 883 Method 3015, and electrical overstress such as IEC 61000-4-4 and 5. They are used for surges below 3000 W 10/1000 μs. This planar technology makes it compatible with high-end equipment and SMPS where low leakage current and high junction temperature are required to provide reliability and stability over time. DS8598 - Rev 8 - January 2024 For further information contact your local STMicroelectronics sales office. www.st.com SMC30JxxA, SMC30JxxCA Characteristics 1 Characteristics Table 1. Absolute maximum ratings (Tamb = 25 °C) Symbol VPP PPP Tstg T.

SMC30J12A : The SMC30J TVS series are designed to protect sensitive equipment against electrostatic discharges according to IEC 61000-4-2, MIL STD 883 Method 3015, and electrical overstress such as IEC 61000-4-4 and 5. They are used for surges below 3000 W 10/1000 μs. This planar technology makes it compatible with high-end equipment and SMPS where low leakage current and high junction temperature are required to provide reliability and stability over time. DS8598 - Rev 8 - January 2024 For further information contact your local STMicroelectronics sales office. www.st.com SMC30JxxA, SMC30JxxCA Characteristics 1 Characteristics Table 1. Absolute maximum ratings (Tamb = 25 °C) Symbol VPP PPP Tstg T.

SMC30J12CA : The SMC30J TVS series are designed to protect sensitive equipment against electrostatic discharges according to IEC 61000-4-2, MIL STD 883 Method 3015, and electrical overstress such as IEC 61000-4-4 and 5. They are used for surges below 3000 W 10/1000 μs. This planar technology makes it compatible with high-end equipment and SMPS where low leakage current and high junction temperature are required to provide reliability and stability over time. DS8598 - Rev 8 - January 2024 For further information contact your local STMicroelectronics sales office. www.st.com SMC30JxxA, SMC30JxxCA Characteristics 1 Characteristics Table 1. Absolute maximum ratings (Tamb = 25 °C) Symbol VPP PPP Tstg T.

SMC30J130A : The SMC30J TVS series are designed to protect sensitive equipment against electrostatic discharges according to IEC 61000-4-2, MIL STD 883 Method 3015, and electrical overstress such as IEC 61000-4-4 and 5. They are used for surges below 3000 W 10/1000 μs. This planar technology makes it compatible with high-end equipment and SMPS where low leakage current and high junction temperature are required to provide reliability and stability over time. DS8598 - Rev 8 - January 2024 For further information contact your local STMicroelectronics sales office. www.st.com SMC30JxxA, SMC30JxxCA Characteristics 1 Characteristics Table 1. Absolute maximum ratings (Tamb = 25 °C) Symbol VPP PPP Tstg T.

SMC30J130CA : The SMC30J TVS series are designed to protect sensitive equipment against electrostatic discharges according to IEC 61000-4-2, MIL STD 883 Method 3015, and electrical overstress such as IEC 61000-4-4 and 5. They are used for surges below 3000 W 10/1000 μs. This planar technology makes it compatible with high-end equipment and SMPS where low leakage current and high junction temperature are required to provide reliability and stability over time. DS8598 - Rev 8 - January 2024 For further information contact your local STMicroelectronics sales office. www.st.com SMC30JxxA, SMC30JxxCA Characteristics 1 Characteristics Table 1. Absolute maximum ratings (Tamb = 25 °C) Symbol VPP PPP Tstg T.

SMC30J13A : The SMC30J TVS series are designed to protect sensitive equipment against electrostatic discharges according to IEC 61000-4-2, MIL STD 883 Method 3015, and electrical overstress such as IEC 61000-4-4 and 5. They are used for surges below 3000 W 10/1000 μs. This planar technology makes it compatible with high-end equipment and SMPS where low leakage current and high junction temperature are required to provide reliability and stability over time. DS8598 - Rev 8 - January 2024 For further information contact your local STMicroelectronics sales office. www.st.com SMC30JxxA, SMC30JxxCA Characteristics 1 Characteristics Table 1. Absolute maximum ratings (Tamb = 25 °C) Symbol VPP PPP Tstg T.