MIC826 Voltage Supervisor with Watchdog Timer, Manual Reset, and Dual Outputs In 1.
6mm x 1.
6mm TDFN General Description The MIC826 is a low-current, ultra-small, voltage supervisor with manual reset input, watchdog timer, and active-high and active-low push-pull outputs.
The reset outputs are asserted and held when the supply voltage falls below the factory-programmed threshold voltage, when the /MR pin is pulled low, or if the watchdog times out.
Reset is asserted for the reset timeout delay after the supply voltage increases above the rising threshold voltage or when manual reset input is asserted high.
The MIC826 features an integrated pull-up resistor on the /MR.
An active-low push-pull...

Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)