| Part Number | MP1005 |
| Manufacturer | Cherry |
| Title | MAGNETIC SENSOR |
| Description | MAGNETIC SENSOR MP1005–1007 Series Solid state, magnetic position sensors in adjustable, threaded housing. Features Excellent output stability... |
| Features |
Excellent output stability over operating temperature range Regulated power supply not required Reverse battery protection to -24 V DC Wire: 20 AWG, tin plated, polyolefin insulation Anodized aluminum housing South pole activated RoHS Compliant Open Collector (NPN) output can be used ...
|
| File Size | 92.71KB |
| Datasheet |
|
MP100 : MP Series Quartz Crystal FEATURES • Standard HC-49/U Package, HC-49/U SMMC Package Option Available • Stable Frequency Over Temperature and Drive Level • Fundamental and 3rd Overtone Crystals • Frequency Range 1.8432 – 64 MHz • Frequency Tolerance, ±30 ppm Standard • Frequency Stability, ±50 ppm Standard • Operating Temperature, –20°C to +70°C Standard, -40°C to +85°C Available • Tape & Reel Packaging Available • RoHS/Green Compliant [6/6] APPLICATIONS The MP crystal series offers excellent long-term stability and reliability in a proven resistance-weld metal package. The excellent shock performance makes it suitable for microprocessor, telecommunication, industrial, consumer electronics an.
MP100-E : MP Series Quartz Crystal FEATURES • Standard HC-49/U Package, HC-49/U SMMC Package Option Available • Stable Frequency Over Temperature and Drive Level • Fundamental and 3rd Overtone Crystals • Frequency Range 1.8432 – 64 MHz • Frequency Tolerance, ±30 ppm Standard • Frequency Stability, ±50 ppm Standard • Operating Temperature, –20°C to +70°C Standard, -40°C to +85°C Available • Tape & Reel Packaging Available • RoHS/Green Compliant [6/6] APPLICATIONS The MP crystal series offers excellent long-term stability and reliability in a proven resistance-weld metal package. The excellent shock performance makes it suitable for microprocessor, telecommunication, industrial, consumer electronics an.
MP1000 : www.DataSheet4U.com Silicon Bridge Rectifiers COMCHIP www.comchiptech.com MP1000 Thru 1010 Reverse Voltage: 50 - 1000 Volts Forward Current: 10 Amp Features - Diffused Junction - High Current Capability High Case Dielectric Strength High Surge Current Capability Ideal for Printed Circuit Board Application Plastic Material has Underwriters Laboratory Flammability Classification 94V-O MP-10 H J G + ~ A E ~ E - Mechanical Data - Case: Molded Plastic - Terminals: Plated Leads Solderable per MIL STD-202, Method 208 - Weight: 5.4 grams (approx.) - Mounting Position: Through Hole for #6 Screw - Mounting Torque: 5.0 Inch-pounds Maximum D Dim A B C D E C B Metal Heat Sink MP-10 Min Ma.
MP1000 : W TE PO WE R SEM IC O ND U C TO RS MP1000 – MP1010 10A BRIDGE RECTIFIER Features ! ! ! ! ! ! Diffused Junction High Current Capability High Case Dielectric Strength High Surge Current Capability Ideal for Printed Circuit Board Application Plastic Material has Underwriters Laboratory Flammability Classification 94V-O H J G E ~ E + ~ A Dim A B C D E MP-10 Min Max 14.73 15.75 5.80 6.90 19.00 — 1.00 Ø Typical 5.11 6.14 Hole for #6 screw G 3.60 4.00 H 10.30 11.30 J 2.38 x 45°C Typical All Dimensions in mm Mechanical Data ! ! ! ! ! ! ! Case: Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: Marked on Body Weight: 5.4 grams (approx.) Mounting Position: Thro.
MP1000-G : www.DataSheet4U.com Silicon Bridge Rectifiers MP1000-G THRU MP1010-G (RoHS Device) Reverse Voltage: 50 ~ 1000 Volts Forward Current: 10 Amp Features: Diffused Junction High Current Capability High Case Dielectric Strength High Surge Current Capability Ideal for Printed Circuit Board Application Plastic Material has Underwriters Laboratory Flammability Classification 94V-0 MP-10 H J G + ~ A E ~ - Mechanical Data: Case: Molded Plastic Terminals: Plated Leads Solderable Per MIL STD-202, Method 208 Weight: 5.4 grams (approx.) Mounting position: Through Hole for #6 Screw D E Dim A B C D E C B Metal Heat Sink KBP Min. Max 14.73 15.75 5.80 6.90 19.00 1.00 O Typical 6.14 5.11 Hole for #6 scr.
MP10005 : www.DataSheet4U.com DC COMPONENTS CO., LTD. R MP10005 THRU MP1010 RECTIFIER SPECIALISTS TECHNICAL SPECIFICATIONS OF SINGLE-PHASE SILICON BRIDGE RECTIFIER VOLTAGE RANGE - 50 to 1000 Volts CURRENT - 10 Amperes FEATURES * Surge overload rating: 200 Amperes peak * Low forward voltage drop * Small size: simple installation MP-6 METAL HEAT SINK MECHANICAL DATA * Case: Molded plastic with heatsink * Epoxy: UL 94V-0 rate flame retardant * Lead: MIL-STD-202E, Method 208 guaranteed * Polarity: Symbols molded or marked on body * Mounting position: Any * Weight: 6.1 grams .620(15.7) .580(14.7) AC AC .270(6.8) .230(5.8) .042(1.1) .039(1.0) .750 MIN (19.1) HOLE FOR NO.6 SCREW .445(11.3) .405(1.
MP1000G : ® WON-TOP ELECTRONICS MP1000G – MP1010G 10A GLASS PASSIVATED SINGLE PHASE BRIDGE RECTIFIER Pb Features Glass Passivated Die Construction High Current Capability High Case Dielectric Strength High Surge Current Capability Ideal for Printed Circuit Board Application Plastic Material has UL Flammability 94V-0 Recognized File # E157705 Mechanical Data Case: MP-10, Molded Plastic with Heatsink Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: Marked on Body Weight: 3.8 grams (approx.) Mounting Position: Through Hole for #6 Screw Mounting Torque: 0.8 N.m Max. Marking: Type Number Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Par.
MP1001 : www.DataSheet4U.com DC COMPONENTS CO., LTD. R MP10005 THRU MP1010 RECTIFIER SPECIALISTS TECHNICAL SPECIFICATIONS OF SINGLE-PHASE SILICON BRIDGE RECTIFIER VOLTAGE RANGE - 50 to 1000 Volts CURRENT - 10 Amperes FEATURES * Surge overload rating: 200 Amperes peak * Low forward voltage drop * Small size: simple installation MP-6 METAL HEAT SINK MECHANICAL DATA * Case: Molded plastic with heatsink * Epoxy: UL 94V-0 rate flame retardant * Lead: MIL-STD-202E, Method 208 guaranteed * Polarity: Symbols molded or marked on body * Mounting position: Any * Weight: 6.1 grams .620(15.7) .580(14.7) AC AC .270(6.8) .230(5.8) .042(1.1) .039(1.0) .750 MIN (19.1) HOLE FOR NO.6 SCREW .445(11.3) .405(1.
MP1001 : www.DataSheet4U.com Silicon Bridge Rectifiers COMCHIP www.comchiptech.com MP1000 Thru 1010 Reverse Voltage: 50 - 1000 Volts Forward Current: 10 Amp Features - Diffused Junction - High Current Capability High Case Dielectric Strength High Surge Current Capability Ideal for Printed Circuit Board Application Plastic Material has Underwriters Laboratory Flammability Classification 94V-O MP-10 H J G + ~ A E ~ E - Mechanical Data - Case: Molded Plastic - Terminals: Plated Leads Solderable per MIL STD-202, Method 208 - Weight: 5.4 grams (approx.) - Mounting Position: Through Hole for #6 Screw - Mounting Torque: 5.0 Inch-pounds Maximum D Dim A B C D E C B Metal Heat Sink MP-10 Min Ma.
MP1001 : W TE PO WE R SEM IC O ND U C TO RS MP1000 – MP1010 10A BRIDGE RECTIFIER Features ! ! ! ! ! ! Diffused Junction High Current Capability High Case Dielectric Strength High Surge Current Capability Ideal for Printed Circuit Board Application Plastic Material has Underwriters Laboratory Flammability Classification 94V-O H J G E ~ E + ~ A Dim A B C D E MP-10 Min Max 14.73 15.75 5.80 6.90 19.00 — 1.00 Ø Typical 5.11 6.14 Hole for #6 screw G 3.60 4.00 H 10.30 11.30 J 2.38 x 45°C Typical All Dimensions in mm Mechanical Data ! ! ! ! ! ! ! Case: Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: Marked on Body Weight: 5.4 grams (approx.) Mounting Position: Thro.
MP1001-G : www.DataSheet4U.com Silicon Bridge Rectifiers MP1000-G THRU MP1010-G (RoHS Device) Reverse Voltage: 50 ~ 1000 Volts Forward Current: 10 Amp Features: Diffused Junction High Current Capability High Case Dielectric Strength High Surge Current Capability Ideal for Printed Circuit Board Application Plastic Material has Underwriters Laboratory Flammability Classification 94V-0 MP-10 H J G + ~ A E ~ - Mechanical Data: Case: Molded Plastic Terminals: Plated Leads Solderable Per MIL STD-202, Method 208 Weight: 5.4 grams (approx.) Mounting position: Through Hole for #6 Screw D E Dim A B C D E C B Metal Heat Sink KBP Min. Max 14.73 15.75 5.80 6.90 19.00 1.00 O Typical 6.14 5.11 Hole for #6 scr.
MP1001G : ® WON-TOP ELECTRONICS MP1000G – MP1010G 10A GLASS PASSIVATED SINGLE PHASE BRIDGE RECTIFIER Pb Features Glass Passivated Die Construction High Current Capability High Case Dielectric Strength High Surge Current Capability Ideal for Printed Circuit Board Application Plastic Material has UL Flammability 94V-0 Recognized File # E157705 Mechanical Data Case: MP-10, Molded Plastic with Heatsink Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: Marked on Body Weight: 3.8 grams (approx.) Mounting Position: Through Hole for #6 Screw Mounting Torque: 0.8 N.m Max. Marking: Type Number Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Par.
MP1001N10T1 : Pin No.
MP1001N10T2 : Pin .
MP1002 : www.DataSheet4U.com DC COMPONENTS CO., LTD. R MP10005 THRU MP1010 RECTIFIER SPECIALISTS TECHNICAL SPECIFICATIONS OF SINGLE-PHASE SILICON BRIDGE RECTIFIER VOLTAGE RANGE - 50 to 1000 Volts CURRENT - 10 Amperes FEATURES * Surge overload rating: 200 Amperes peak * Low forward voltage drop * Small size: simple installation MP-6 METAL HEAT SINK MECHANICAL DATA * Case: Molded plastic with heatsink * Epoxy: UL 94V-0 rate flame retardant * Lead: MIL-STD-202E, Method 208 guaranteed * Polarity: Symbols molded or marked on body * Mounting position: Any * Weight: 6.1 grams .620(15.7) .580(14.7) AC AC .270(6.8) .230(5.8) .042(1.1) .039(1.0) .750 MIN (19.1) HOLE FOR NO.6 SCREW .445(11.3) .405(1.
MP1002 : www.DataSheet4U.com Silicon Bridge Rectifiers COMCHIP www.comchiptech.com MP1000 Thru 1010 Reverse Voltage: 50 - 1000 Volts Forward Current: 10 Amp Features - Diffused Junction - High Current Capability High Case Dielectric Strength High Surge Current Capability Ideal for Printed Circuit Board Application Plastic Material has Underwriters Laboratory Flammability Classification 94V-O MP-10 H J G + ~ A E ~ E - Mechanical Data - Case: Molded Plastic - Terminals: Plated Leads Solderable per MIL STD-202, Method 208 - Weight: 5.4 grams (approx.) - Mounting Position: Through Hole for #6 Screw - Mounting Torque: 5.0 Inch-pounds Maximum D Dim A B C D E C B Metal Heat Sink MP-10 Min Ma.
MP1002 : W TE PO WE R SEM IC O ND U C TO RS MP1000 – MP1010 10A BRIDGE RECTIFIER Features ! ! ! ! ! ! Diffused Junction High Current Capability High Case Dielectric Strength High Surge Current Capability Ideal for Printed Circuit Board Application Plastic Material has Underwriters Laboratory Flammability Classification 94V-O H J G E ~ E + ~ A Dim A B C D E MP-10 Min Max 14.73 15.75 5.80 6.90 19.00 — 1.00 Ø Typical 5.11 6.14 Hole for #6 screw G 3.60 4.00 H 10.30 11.30 J 2.38 x 45°C Typical All Dimensions in mm Mechanical Data ! ! ! ! ! ! ! Case: Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: Marked on Body Weight: 5.4 grams (approx.) Mounting Position: Thro.