Part Number
|
NIMD6001ANR2G |
Manufacturer
|
ON Semiconductor |
Description
|
Dual N-Channel Driver |
Published
|
Aug 24, 2015 |
Detailed Description
|
NIMD6001N, NIMD6001AN
Dual N-Channel Driver with Diagnostic Output
60 V, 3 A, 110 mW
NIMD6001N/AN is a dual 3 Amp low-s...
|
Datasheet
|
NIMD6001ANR2G
|
Overview
NIMD6001N, NIMD6001AN
Dual N-Channel Driver with Diagnostic Output
60 V, 3 A, 110 mW
NIMD6001N/AN is a dual 3 Amp low-side switch with an integrated common disable input and drain diagnostic output.
Pulling the Disable pin low will override any applied gate voltages and turn off both FET switches.
Should either Drain-Source voltage exceed approximately 50 V, a logic 1 ( 3 V) will be asserted on the Diagnostic/Feedback pin.
Internal isolation diodes permit the Disable and Diagnostic/ Feedback pins of multiple devices to be interconnected in a “wired-OR” configuration without additional components.
Features
• RDSON 110 mW Maximum at VGS = 10 V • Avalanche Energy Specified • Gate Drive Disabl...
Similar Datasheet