SA5.0

SA5.0 : AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSORS SA5.0 - SA440CA DIMENSION DO-15 Dim Millimeters Inches Min Max Min Max A 25.4 --- 1.000 --- B 5.80 7.60 0.230 0.300 C 0.70 0.90 0.028 0.034 D 2.60 3.60 0.104 0.140 SPECIFICATION Type Number (Uni) SA5.0 SA5.0A SA6.0 SA6.0A SA6.5 SA6.5A SA7.0 SA7.0A SA7.5 SA7.5A SA8.0 SA8.0A SA8.5 SA8.5A SA9.0 SA9.0A SA10 SA10A SA11 SA11A SA12 SA12A SA13 SA13A (Bi) SA5.0C SA5.0CA SA6.0C SA6.0CA SA6.5C SA6.5CA SA7.0C SA7.0CA SA7.5C SA7.5CA SA8.0C SA8.0CA SA8.5C SA8.5CA SA9.0C SA9.0CA SA10C SA10CA SA11C SA11CA SA12C SA12CA SA13C SA13CA Reverse Stand-Off Voltage VRMW(V) 5.0 5.0 6.0 6.0 6.5 6.5 7.0 7.0 7.5 7.5 8.0 8.0 8.5 8.5 9.0 9.0 10 10 11 11 12 12 13 13 Br.

SA5.0 : This Transient Voltage Suppressor is a high value commercial product that offers protection to voltage sensitive components. The response time of their clamping action is virtually instantaneous (less than 100 ps for unidirectional and less than 5 ns for bidirectional). They have a peak pulse power rating of 500 watts at 10/1000µs as depicted in figures 1 and 2. They are also virtually identical to power ratings and electrical features of the P5KE5.0 through P5KE170CA series that had also been earlier defined for this same package. Important: For the latest information, visit our website http://www.microsemi.com. FEATURES • Available in both unidirectional and bi-directional construction. •.

SA5.0 : SA5.0~SA220CA GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR POWER 500 Watt STAND-OFF VOLTAGE 5 to 220 Volt FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • Glass passivated chip junction in DO-15 package • 500W surge capability at 1ms • Excellent clamping capability • Low zener impedance • Fast response time: typically less than 1ps from 0 volts to BV min • High temperature soldering guaranteed: 260°C/10 seconds/0.375" ,(9.5mm) lead length/5lbs., (2.3kg) tension • ESD IEC-61000-4-2 Air + 30kV, Contact + 30kV • Lead free in compliance with EU RoHS 2011/65/EU directive 0.300(7.6) 0.230(5.8) 1.0(25.4)MIN. 0.034(0.86) 0.028(0.71) 0.140(3..

SA5.0 : MEI SA5.0 THRU Lead Free RoHS Compliant TRANSIENT VOLTAGE SUPPRESSOR SA170 VOLTAGE RANGE POWER FEATURES • Glass passivated chip junction • 500W surge capacity @ 10/1000 µSec wave form • Fast response, typically less then 1 pSec • Low Zener impedence • Excellent clamping capability • High temperature soldering guaranteed: 260 /10 seconds, 0.375” (9.5mm) lead length 5.0 to 170 Volts 500 Watts MECHANICAL DATA • Case: transfer molded plastic • Epoxy: UL94V – 0 rate flame retardant • Polarity: Color band denotes cathode end, except on bipolar parts which have no band • Lead: Plated axial lead, solderable per MIL-STD-202E method 208C • Mounting position: any • Weight: 0.014 ounce, 0.3 gram.

SA5.0 : SA5.0 thru SA170CA Crownpo Technology TRANSZORB Transient Voltage Suppressors Stand Off Voltage 5.0 to 170V Peak Pulse Power 500W Features N Plastic package has Underwriters Laboratory Flammability Classification 94V-0 N Glass passivated junction N Excellent clamping capability N Low incremental surge resistance N Very fast response time N 500W peak pulse power surge capability with a 10/100 es waveform, repetition rate (duty cycle): 0.01% N High temperature soldering guaranteed: 265-C/10 seconds, 0.375" (9.5mm) lead length, 5lbs. (2.3kg) tension Mechanical Data Case: JEDEC DO-204AC molded plastic body over passivated junction Terminals: Solder plated axial leads, solderable per MIL-STD-.

SA5.0 : BL GALAXY ELECTRICAL TRANSIENT VOLTAGE SUPPRESSOR FEATURES Plastic package gas Underwriters Laboratory Flammability Classification 94V-0 Glass passivated junction 500W peak pulse power capability with a 10/1000µs waveform, repetition rate (duty cycle): 0.01% Excellent clamping capability Low incremental surge resistance Fast response time: typically less than 1.0ps from 0 Volts to V(BR) for uni-directional and 5.0ns for bidirectional types Typical ID Less than 1 µA above 10V High temperature soldering guaranteed:265 / 10 seconds, 0.375"(9.5mm) lead length, 51bs. (2.3kg) tension MECHANICAL DATA Case:JEDEC DO-15, molded plastic body over passivated junction Terminals: Axial leads, solderable p.

SA5.0 : DC COMPONENTS CO., LTD. R RECTIFIER SPECIALISTS SA5.0 THRU SA220CA TECHNICAL SPECIFICATIONS OF TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE RANGE - 5.0 to 220Volts PEAK PULSE POWER - 500 Watts FEATURES * Glass passivated junction * 500 Watts Peak Pulse Power capability on 10/1000 µs waveform * Excellent clamping capability * Low zener impedance * Fast response time DO-15 MECHANICAL DATA * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant * Lead: MIL-STD-202E, Method 208 guaranteed * Polarity: Color band denotes positive end (cathode) except bidirectional types * Mounting position: Any * Weight: 0.4 gram 1.0 (25.4) MIN. .034 (0.9) .028 (0.7) DIA. .300 (7.6) .230 (5.8) 1.0 (25.4) MIN.

SA5.0 : SA5.0‐SA170CA  High‐reliability discrete products   and engineering services since 1977  TRANSIENT VOLTAGE SUPPRESSORS  500 WATTS  DO‐41    FEATURES  • Available as “HR” (high reliability) screened per MIL‐PRF‐19500, JANTX level. Add “HR” suffix to base part number.  • Available Non‐RoHS (standard) or RoHS compliant (add PBF suffix).  • For bi‐directional construction, indicate a “C” or “CA” suffix, i.e. SA5.0CA.    MAXIMUM RATINGS  Parameters  Symbol  Value  Average power dissipation  @ TL = 25°C (1)  PM(AV)    2.5  Peak pulse power dissipation  @ 1000µs  PPP    500  tclamping (0 Volts to BV min)  Unidirectional  Bidirectional       1   5  Solder temperature @ 10s  TSP  .

SA5.0 : SA5.0 thru SA170CA Vishay General Semiconductor TRANSZORB® Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS VWM PPPM PD IFSM (uni-directional only) TJ max. 5.0 V to 170 V 500 W 3.0 W 70 A 175 °C DEVICES FOR BI-DIRECTION APPLICATIONS For bi-directional types, use C or CA suffix (e.g. SA5.0C, SA170CA). Electrical characteristics apply in both directions. FEATURES • Glass passivated chip junction • Available in uni-directional and bi-directional • 500 W peak pulse power capability with a 10/1000 µs waveform, repetitive rate (duty cycle): 0.01 % • Excellent clamping capability • Very fast response time • Low incremental surge resistance • Solder dip 260 °C, 40 seconds.

SA5.0 : SA5.0 THRU SA170CA TRANSZORB™ TRANSIENT VOLTAGE SUPPRESSOR Stand-off Voltage - 5.0 to 170 Volts DO-204AC Peak Pulse Power - 500 Watts FEATURES 0.034 (0.86) 1.0 (25.4) MIN. 0.028 (0.71) DIA. 0.300 (7.6) 0.230 (5.8) 0.140 (3.6) 0.104 (2.6) DIA. 1.0 (25.4) MIN. ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ Glass passivated junction ♦ 500W peak pulse power surge capability with a 10/1000µs waveform, repetition rate (duty cycle): 0.01% ♦ Excellent clamping capability ♦ Low incremental surge resistance ♦ Fast response time: typically less than 1.0ps from 0 Volts to V(BR) for uni-directional and 5.0ns for bi-directional types ♦ For devices with V(BR)≥10V, ID.

SA5.0 : SA5.0 THRU SA180CA 500 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS VOLTAGE RANGE 5.0 to 180 Volts FEATURES * 500 Watts Surge Capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1µA above 10V * High temperature soldering guaranteed: 260 C / 10 seconds / .375"(9.5mm) lead length, 5lbs.(2.3kg) tension 500 Watts Peak Power 3.0 Watts Steady State DO-15 .140(3.6) .104(2.6) DIA. 1.0(25.4) MIN. MECHANICAL DATA * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant * Lead: Axial leads, solderable per MIL-STD-202, method 208 guranteed * Polarity: Color band denotes cathode.

SA5.0 : SA5.0 - SA170A VBR : 6.8 - 200 Volts PPK : 500 Watts FEATURES : * 500W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) * Typical IR less then 1µA above 10V TRANSIENT VOLTAGE SUPPRESSOR DO - 41 0.107 (2.74) 0.080 (2.03) 1.00 (25.4) MIN. 0.205 (5.20) 0.160 (4.10) MECHANICAL DATA * Case : DO-41 Molded plastic * Epoxy : UL94V-O rate flame retardant * Lead : Axial lead solderable per MIL-STD-202, method 208 guaranteed * Polarity : Color band denotes cathode end except Bipolar. * Mounting position : Any * Weight : 0.339 gram 0.034 (0.86) 0.028 (0.71) 1.00 (25.4) MIN. Dimensions in inche.

SA5.0 : ® WON-TOP ELECTRONICS Features  Glass Passivated Die Construction  500W Peak Pulse Power Dissipation  5.0V – 220V Standoff Voltage  Uni- and Bi-Directional Versions Available  Excellent Clamping Voltage  Typical Response Time 1nS  Plastic Case Material has UL Flammability Classification Rating 94V-0 Mechanical Data  Case: DO-15, Molded Plastic  Terminals: Plated Leads Solderable per MIL-STD-202, Method 208  Polarity: Cathode Band Except Bi-Directional  Weight: 0.40 grams (approx.)  Mounting Position: Any  Marking: Type Number  Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Part Number, See Page 6 SA SERIES 500W TRANSIENT VOLTAGE SUPPRESSOR Pb AB A D DO-15 Di.

SA5.0 : SHANGHAI SEMITECH SEMICONDUCTOR CO., LTD SA5.0A---SA440CA GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR Features z Glass Passivated Die Construction z 500W Peak Pulse Power Dissipation z Uni-directional Versions Available z Excellent Clamping Capability z Fast Response Time 1 ns DO-15 Applications z Communication Systems z Power Supplies z Medical Equipment z Business Machines REF. A b c D DIMENSIONS Millimeters Inches Min. Max. Min. Max. 25.4 31 1.000 1.220 5.84 7.62 0.230 0.300 0.71 0.86 0.028 0.034 2.64 3.56 0.104 0.140 Absolute Maximum Ratings Parameter Symbol Value Units Peak Power Dissipation (Note 1.) @TL = 25°C, Pulse Width = 1 ms PPK 500 W.

SA5.0 : Transient Voltage Suppression (TVS) Diodes SA5.0 – SA170A Series Invisible Protection When no problems exist, Crydom TVS Diodes are totally invisible to the circuits they're protecting. But when potentially damaging transients occur, they provide high-speed "clamping" to prevent damage – and then return to their electronically invisible state. APPLICATIONS FOR SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS Protect sensitive electronics against voltage transients induced by electrostatic discharge (ESD), inductive load switching, and lightning. Ideal for the protection of I/O interfaces, VCC bus, and other integrated circuits. FEATURES • Glass passivated junction • Stand-off voltage range: 5-17.

SA5.0A : AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSORS SA5.0 - SA440CA DIMENSION DO-15 Dim Millimeters Inches Min Max Min Max A 25.4 --- 1.000 --- B 5.80 7.60 0.230 0.300 C 0.70 0.90 0.028 0.034 D 2.60 3.60 0.104 0.140 SPECIFICATION Type Number (Uni) SA5.0 SA5.0A SA6.0 SA6.0A SA6.5 SA6.5A SA7.0 SA7.0A SA7.5 SA7.5A SA8.0 SA8.0A SA8.5 SA8.5A SA9.0 SA9.0A SA10 SA10A SA11 SA11A SA12 SA12A SA13 SA13A (Bi) SA5.0C SA5.0CA SA6.0C SA6.0CA SA6.5C SA6.5CA SA7.0C SA7.0CA SA7.5C SA7.5CA SA8.0C SA8.0CA SA8.5C SA8.5CA SA9.0C SA9.0CA SA10C SA10CA SA11C SA11CA SA12C SA12CA SA13C SA13CA Reverse Stand-Off Voltage VRMW(V) 5.0 5.0 6.0 6.0 6.5 6.5 7.0 7.0 7.5 7.5 8.0 8.0 8.5 8.5 9.0 9.0 10 10 11 11 12 12 13 13 Br.