AH375
SINGLE PHASE HALL EFFECT LATCH
Description
Pin Assignments
AH375 is an integrated Hall-Effect latched sensor designed for electronic commutation of brush-less DC motor applications.
The device includes an on-chip Hall
voltage generator for magnetic sensing, a comparator that amplifies the Hall
voltage, and a Schmitt trigger to provide switching hysteresis for noise rejection, and open drain output.
An internal band-gap regulator provides a temperature compensated supply
voltage for internal circuits and allows a wide operating supply range.
When the magnetic flux density (B) is larger than operate point (Bop), output is switched on (OUT pin is pulled low).
The output state is held o...