Part Number | AS1119 |
Manufacturer | austriamicrosystems AG |
Title | 144-LED Cross-Plexing Driver |
Description | The AS1119 is a compact LED driver for 144 (90) single LEDs. The devices can be programmed via an I²C compatible interface. The AS1119 offers two ... |
Features |
very low shutdown and operational current.
The device is available in a ultrasmall 36-pin WL-CSP.
2 Key Features
1MHz I²C-Compatible Interface Open and Shorted LED Error Detection 144 LEDs in Dot Matrix Low-Power Shutdown Current Individual 8-bit LED PWM Control 8-bit Analog Brightness Control (1:1... |
File Size | 1.05MB |
Datasheet |
|
AS1118 : htp:/w.elcfansom u5[PSÑpçË htp:/bs.elcfanom u5[Pb€g/‹ºW Data sheet AS1118 64 LED Driver for Mobile Applications with Error Detection 1 General Description The AS1118 is a compact LED driver for 64 single LEDs or 8 digits of 7-segments. The devices can be programmed via an SPI compatible 3-wire interface. Every segment can be individually addressed and updated separately. Only one external resistor (RSET) is required to set the current. LED brightness can be controlled by analog or digital means. The devices include an integrated BCD code-B/HEX decoder, multiplex scan circuitry, segment and display drivers, and a 64-bit memory. Internal memory stores the shift register settings, eliminat.
AS1117 : AS1117 800mA Low Dropout Regulator SCSI-II Active Terminator FEATURES • Guaranteed 800mA Output • Three Terminal Adjustable Or Fixed 1.5V, 2.5V, 3V, 3.3V & 5V • Very Low Quiescent Current • Low Dropout Voltage Of 1.2 Volts At Full Load • Extremely Tight Load And Line Regulation • Very Low Temperature Coefficient • Logic-Controlled Electronic Shutdown • Internal Overcurrent Limiting & Thermal Overload Protection • Surface Mount Package SOT-223, TO-252, TO-220, SOT-89, TO-263, & SO-8 APPLICATIONS • SCSI-II Active Terminator • Portable/ Palm Top / Notebook Computers • Battery Chargers • Disk Drives • Portable Consumer Equipment • Portable Instrumentation • SMPS Post-Regulator PRODUCT DESCRIP.
AS1117 : Technical coantmesntAsGtill valid Datasheet AS1117 64 LED Driver for Mobile Applications with Error Detection 1 General Description The AS1117 is a compact LED driver for 64 single LEDs or 8 digits of 7-segments. The devices can be programmed via an I²C compatible 2-wire interface. Every segment can be individually addressed and updated separately. Only one external resistor (RSET) is required to set the current. LED brightness can be controlled by analog or digital means. The devices include an integrated BCD code-B/HEX decoder, multiplex scan circuitry, segment and display drivers, and a 64-bit memory. Internal memory stores the shift register settings, eliminating the need for continu.
AS1116 : www.DataSheet4U.com AS1116 6 4 L E D D r i v e r w i t h D e ta i l e d E r r o r D e t e c t i o n D a ta s h e e t 1 General Description The AS1116 is a compact LED driver for 64 single LEDs or 8 digits of 7-segments. The devices can be programmed via an SPI compatible 3-wire interface. Every segment can be individually addressed and updated separately. Only one external resistor (RSET) is required to set the current. LED brightness can be controlled by analog or digital means. The devices include an integrated BCD code-B/HEX decoder, multiplex scan circuitry, segment and display drivers, and a 64-bit memory. Internal memory stores the shift register settings, eliminating the need for c.