| Part Number | CLC109 |
| Manufacturer | National Semiconductor |
| Title | Low-Power/ Wideband/ Closed-Loop Buffer |
| Description | The CLC109 is a high-performance, closed-loop monolithic buffer intended for power sensitive applications. Requiring only 35mW of quiescent power ... |
| Features |
s s s s s s
High small-signal bandwidth (270MHz) Low supply current (3.5mA @ ±5V) Low output impedance (2.8Ω) 350V/µs slew rate Single supply operation (0 to 3V supply min.) Evaluation boards and Spice models Video switch buffers Test point drivers Low power active filters DC clamping buffer High-s... |
| File Size | 171.42KB |
| Datasheet |
|
CLC1050 : Data Sheet A m p l i fy t h e H u m a n E x p e r i e n c e ® Low Power, 3V to 36V, Single, Dual, Quad Amplifiers www.datasheet4u.com FEATURES n Unity gain stable n 100dB voltage gain n 550kHz unity gain bandwidth n 0.5mA supply current n 20nA input bias current n 2mV input offset voltage n 3V to 36V single supply voltage range n ±1.5V to ±18V dual supply voltage range n Input common mode voltage range includes ground n 0V to VS-1.5V output voltage swing n CLC2050: improved replacement for industry standard LM358 n CLC4050: Improved replacement for industry standard LM324 n CLC1050: Pb-free SOT23-5 n CLC2050: Pb-free SOIC-8 n CLC4050: Pb-free SOIC-14 APPLICATIONS n Ba.
CLC103 : Comlinear CLC103 Fast Settling, High Current Wideband Op Amp August 1996 N Comlinear CLC103 Fast Settling, High Current Wideband Op Amp General Description Features s s s s s 80MHz full-power bandwidth (20Vpp, 100Ω) 200mA output current 0.4% settling in 10ns 600V/µs slew rate 4ns rise and fall times (20V) Coaxial line driving DAC current to voltage amplifier Flash A to D Baseband and video communications Radar and IF processors Applications s s s s s The CLC103 is constructed using thin film resistor/bipolar transistor technology, and is available in two versions: CLC103AI CLC103AM -25°C to +85°C -55°C to +125°C 24-pin ceramic DIP 24-pin ceramic DIP, MIL-STD-883, Level B © 1996 Nationa.
CLC1020 : CLC1020 General Purpose, Rail to Rail Output Ampli ier Rev 1B Data Sheet CLC1020 General Purpose, Rail to Rail Output Amplifier Rail to Rail Amplifiers FEATURES n 127μA supply current n 2.1MHz gain bandwidth n Input voltage range with 5V supply: -0.4V to 4.3V n Output voltage range with 5V supply: 0.01V to 4.99V n 2.7V/μs slew rate n 0.7pA bias current n 0.1mV input offset voltage n No crossover distortion n Fully specified at 2.7V and 5V supplies n Pb-free TSOT-5 APPLICATIONS n Portable/battery-powered applications n Mobile communications, cell phones, pagers n ADC buffer n Active filters n Portable test instruments n Medical Equipment n Portable medical instrumentati.
CLC1015 : CLC1005, CLC1015, CLC2005 Low Cost, +2.7V to 5.5V, 260MHz Rail-to-Rail Amplifiers General Description The CLC1005 (single), CLC1015 (single with disable), and CLC2005 (dual) are low cost, voltage feedback amplifiers. These amplifiers are designed to operate on +2.7V to +5V, or ±2.5V supplies. The input voltage range extends 300mV below the negative rail and 1.2V below the positive rail. The CLC1005, CLC1015, and CLC2005 offer superior dynamic performance with 260MHz small signal bandwidth and 145V/μs slew rate. The amplifiers consume only 4.2mA of supply current per channel and the CLC1015 offers a disable supply current of only 127μA. The combination of low power, high output current drive.