DG413L

DG413LE : www.vishay.com DG411LE, DG412LE, DG413LE Vishay Siliconix 16 , Low Parasitic Capacitance and Leakage, +12 V / +5 V / +3 V / ± 5 V Quad SPST Switches DESCRIPTION The DG411LE, DG412LE, and DG413LE are monolithic quad single-pole-single-throw analog switches. The DG411LE and DG412LE differ only in that they respond to opposite logic levels. The DG413LE has two normally open and two normally closed switches. It can be given various configurations, including four SPST, two SPDT, and one DPDT. The DG411LE, DG412LE, and DG413LE offer low on resistance of 16 , low parasitic capacitance of 15 pF switch on capacitance, and low charge injection over the signal swing range. The DG411LE, DG412LE, an.

DG413HS : DG411HS, DG412HS, DG413HS Vishay Siliconix Precision Monolithic Quad SPST CMOS Analog Switches DESCRIPTION The DG411HS series of monolithic quad analog switches was designed to provide high speed, low error switching of precision analog signals. Combining low power (0.35 µW) with high speed (tON: 68 ns), the DG411HS family is ideally suited for portable and battery powered industrial and military applications. To achieve high-voltage ratings and superior switching performance, the DG411HS series was built on Vishay Siliconix’s high voltage silicon gate process. An epitaxial layer prevents latchup. Each switch conducts equally well in both directions when on, and blocks input voltages up to .

DG413F : 19-2418; Rev 0; 4/02 DG411F/DG412F/DG413F Quad, Rail-to-Rail, Fault-Protected, SPST Analog Switches General Description The DG411F/DG412F/DG413F are quad, single-pole/single-throw (SPST), fault-protected analog switches. They are pin compatible with the industry-standard nonprotected DG411/DG412/DG413. These new switches feature fault-protected inputs and Rail-to-Rail signalhandling capability. All terminals are protected from overvoltage faults up to ±36V with power on and up to ±40V with power off. During a fault condition, the COM, NO, or NC terminal becomes an open circuit and only microamperes of leakage current flow from the source. On-resistance is 35Ω (max) and is matched between.

DG413 : DG411, DG412, DG413 Monolithic Quad SPST, CMOS Analog Switches The DG411 series monolithic CMOS analog switches are drop-in replacements for the popular DG211 and DG212 series devices. They include four independent single pole throw (SPST) analog switches, and TTL and CMOS compatible digital inputs. These switches feature lower analog ON-resistance (35) and faster switch time (tON175ns) compared to the DG211 or DG212. Charge injection has been reduced, simplifying sample and hold applications. The improvements in the DG411 series are made possible by using a high voltage silicon-gate process. An epitaxial layer prevents the latch-up associated with older CMOS technologies. The 44V maximum.