Part Number
|
DS28E18 |
Manufacturer
|
Maxim Integrated |
Description
|
1-Wire to I2C/SPI Bridge |
Published
|
Jun 20, 2022 |
Detailed Description
|
Click here to ask about the production status of specific part numbers.
DS28E18
1-Wire® to I2C/SPI Bridge with Command...
|
Datasheet
|
DS28E18
|
Overview
Click here to ask about the production status of specific part numbers.
DS28E18
1-Wire® to I2C/SPI Bridge with Command
Sequencer
General Description
The DS28E18 is a simple communications bridge that resides at a remote SPI or I2C sensor and allows the sensor to be controlled by just two wires coming from the host system.
It reduces the wire count from six (for SPI) or four (for I2C).
These two wires use Maxim’s 1-Wire protocol that combines power and signal on a single wire, and which is driven by the programmable I/O pins on the host’s microcontroller.
The 1-Wire network supports connection lengths up to 100m and 10 sensor nodes or more.
The IC provides a 512-byte command sequencer in ...
Similar Datasheet