EL9110
Differential Receiver/Equalizer
The EL9110 is a single channel differential receiver and equalizer.
It contains a high speed differential receiver with 5 programmable poles.
The outputs of these pole blocks are then summed into an output buffer.
The equalization length is set with the
voltage on a single pin.
The EL9110 also contains a three-statable output, enabling multiple devices to be connected in parallel and used in a multiplexing application.
The gain can be adjusted up or down by 6dB using the VGAIN control signal.
In addition, a further 6dB of gain can be switched in to provide a matched drive into a cable.
The EL9110 has a bandwidth of 150MHz and consumes just 33mA on ±5V ...