| Part Number | MAX9620 |
| Manufacturer | Maxim Integrated Products |
| Title | 1.5MHz Op Amps |
| Description | The MAX9617–MAX9620 are low-power, zero-drift operational amplifiers available in space-saving SC70 packages. They are designed for use in portabl... |
| Features |
a power-saving shutdown mode. The MAX9618 is available in a 2mm x 2mm, 8-pin SC70 package. The MAX9620 is available in a 2mm x 2mm, 5-pin SC70 package. All devices are specified over the -40... |
| File Size | 758.90KB |
| Datasheet |
|
MAX9622 : 19-5227; Rev 0; 9/10 TION KIT EVALUA BLE IL AVA A Precision, High-Bandwidth Op Amp S 50MHz UGBW S Low Input Voltage Offset Voltage (100µV max) S Input Common-Mode Voltage Range Extends Below Ground S Wide 2.0V to 5.25V Supply Range S Low 1mA Supply Current www.DataSheet4U.com General Description The MAX9622 op amp features rail-to-rail output and 50MHz GBW at just 1mA supply current. At power-up, this device autocalibrates its input offset voltage to less than 100FV. It operates from a single-supply voltage of 2.0V to 5.25V. The MAX9622 is available in a tiny 2mm x 2mm, 5-pin SC70 package and is rated over the -40NC to +125NC automotive temperature range. Features MAX9622 Applica.
MAX9621 : 19-5024; Rev 0; 11/09 TION KIT EVALUA BLE A IL A AV Dual, 2-Wire Hall-Effect Sensor Interface with Analog and Digital Outputs General Description The MAX9621 is a continuation of the Maxim family of Hall-effect sensor interfaces that already includes the MAX9921. The MAX9621 provides a single-chip solution to interface two 2-wire Hall-effect sensors to low-voltage microprocessors (FP) through either a digital output for Hall-effect switches or an analog output for linear information or both. The MAX9621 protects the Hall sensors from supply transients up to 60V at the BAT supply. Normal operating supply voltage ranges from 5.5V to 18V. If the BAT supply rises above 18V, the MAX9621 shuts o.
MAX962 : Click here to ask about the production status of specific part numbers. MAX961–MAX964/ MAX997/MAX999 Single/Dual/Quad, Ultra-High-Speed, +3V/+5V, Beyond-the-Rails Comparators General Description The MAX961–MAX964/MAX997/MAX999 are low-power, ultra-high-speed comparators with internal hysteresis. These devices are optimized for single +3V or +5V operation. The input common-mode range extends 100mV Beyond-theRails™, and the outputs can sink or source 4mA to within 0.52V of GND and VCC. Propagation delay is 4.5ns (5mV overdrive), while supply current is 5mA per comparator. The MAX961/MAX963/MAX964 and MAX997 have a shutdown mode in which they consume only 270μA supply current per comparator..