NCP348, NCP348AE
Positive Over
voltage
Protection Controller with
Internal Low RON NMOS FET and Status FLAG
The NCP348 is able to disconnect the systems from its output pin in case wrong input operating conditions are detected.
The system is positive over
voltage protected up to +28 V.
Due to this device using internal NMOS, no external device is necessary, reducing the system cost and the PCB area of the application board.
The NCP348 is able to instantaneously disconnect the output from the input, due to integrated Low RON Power NMOS (65 mW), if the input
voltage exceeds the over
voltage threshold (OVLO) or under
voltage threshold (UVLO).
At powerup (EN pin = low level), the Vout turns on 50 m...