| Part Number | SC187 |
| Manufacturer | Semtech |
| Title | 2.2MHz Synchronous Step-Down Regulator |
| Description | SC187 POWER MANAGEMENT 4A, 2.2MHz Synchronous Step-Down Regulator with 15 Preset Output Voltages Features Input Voltage Range — 2.9 to 5.5V ... |
| Features |
Input Voltage Range — 2.9 to 5.5V Output Voltage Range — 0.8V to 3.3V Output Current — up to 4A Ultra-Small Footprint — 1mm Height Solution Minimum 1.8MHz Switching Frequency with no AM
Radio Band Interference Efficiency Up to 95% Low Output Noise Across Load Range Excellent Transie... |
| File Size | 1.02MB |
| Datasheet |
|
SC18IS603 : SC18IS602/602B/603 I2C-bus to SPI bridge Rev. 04 — 11 March 2008 Product data sheet www.DataSheet4U.com 1. General description The SC18IS602/602B and SC18IS603 are designed to serve as an interface between a standard I2C-bus of a microcontroller and an SPI bus. This allows the microcontroller to communicate directly with SPI devices through its I2C-bus. The SC18IS602/602B/603 operates as an I2C-bus slave-transmitter or slave-receiver and an SPI master. The SC18IS602/602B/603 controls all the SPI bus-specific sequences, protocol, and timing. The SC18IS602/602B has its own internal oscillator, while the SC18IS603 requires an external clock source for operation. SC18IS602 and SC18IS603 do not s.
SC18IS602B : SC18IS602B I2C-bus to SPI bridge Rev. 7 — 21 October 2019 Product data sheet 1. General description The SC18IS602B is designed to serve as an interface between a standard I2C-bus of a microcontroller and an SPI bus. This allows the microcontroller to communicate directly with SPI devices through its I2C-bus. The SC18IS602B operates as an I2C-bus slave-transmitter or slave-receiver and an SPI master. The SC18IS602B controls all the SPI bus-specific sequences, protocol, and timing. The SC18IS602B has its own internal oscillator, and it supports four SPI chip select outputs that may be configured as GPIO when not used. 2. Features and benefits I2C-bus slave interface operating up to 400 kHz.
SC18IS602 : SC18IS602/602B/603 I2C-bus to SPI bridge Rev. 04 — 11 March 2008 Product data sheet www.DataSheet4U.com 1. General description The SC18IS602/602B and SC18IS603 are designed to serve as an interface between a standard I2C-bus of a microcontroller and an SPI bus. This allows the microcontroller to communicate directly with SPI devices through its I2C-bus. The SC18IS602/602B/603 operates as an I2C-bus slave-transmitter or slave-receiver and an SPI master. The SC18IS602/602B/603 controls all the SPI bus-specific sequences, protocol, and timing. The SC18IS602/602B has its own internal oscillator, while the SC18IS603 requires an external clock source for operation. SC18IS602 and SC18IS603 do not s.
SC18IS601 : www.DataSheet4U.com SC18IS600/601 SPI to I2C-bus interface Rev. 03 — 13 December 2006 Product data sheet 1. General description The SC18IS600/601 is designed to serve as an interface between the standard SPI of a host (microcontroller, microprocessor, chip set, etc.) and the serial I2C-bus. This allows the host to communicate directly with other I2C-bus devices. The SC18IS600/601 can operate as an I2C-bus master-transmitter or master-receiver. The SC18IS600/601 controls all the I2C-bus specific sequences, protocol, arbitration and timing. The key distinction between the SC18IS600 and the SC18IS601 lies in the clock source: internal (SC18IS600) versus external (SC18IS601). 2. Features I I I.
SC18IS600 : SC18IS600 SPI to I2C-bus interface Rev. 8 — 9 October 2019 Product data sheet 1. General description The SC18IS600 is designed to serve as an interface between the standard SPI of a host (microcontroller, microprocessor, chip set, etc.) and the serial I2C-bus. This allows the host to communicate directly with other I2C-bus devices. The SC18IS600 can operate as an I2C-bus master-transmitter or master-receiver. The SC18IS600 controls all the I2C-bus specific sequences, protocol, arbitration and timing. 2. Features and benefits SPI slave interface SPI Mode 3 Single master I2C-bus controller Four General Purpose Input/Output (GPIO) pins Two quasi-bidirectional I/O pins 5 V tolerant.