D 2-V to 6-V VCC Operation D Inputs Accept
Voltages to 6 V D Max tpd of 6.
5 ns at 5 V
description/ordering information
These octal buffers and line drivers are designed specifically to improve the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters.
The ’AC240 devices are organized as two 4-bit buffers/drivers with separate output-enable (OE) inputs.
When OE is low, the device passes inverted data from the A inputs to the Y outputs.
When OE is high, the outputs are in the high-impedance state.
To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value...