Part Number
|
TDA8596 |
Manufacturer
|
NXP |
Description
|
4 x 45 W power amplifier |
Published
|
Feb 4, 2016 |
Detailed Description
|
TDA8596
I2C-bus controlled 4 × 45 W power amplifier with symmetrical inputs
Rev. 02 — 8 November 2007
Product data she...
|
Datasheet
|
TDA8596
|
Overview
TDA8596
I2C-bus controlled 4 × 45 W power amplifier with symmetrical inputs
Rev.
02 — 8 November 2007
Product data sheet
1.
General description
The TDA8596 is a quad Bridge Tied Load (BTL) audio power amplifier with symmetrical inputs, made in BCDMOS technology.
It contains four independent amplifier channels in BTL configuration with complementary (PMOST/NMOST) output stages.
Temperature warning and output signal clipping diagnosis is possible via the I2C-bus and via the diagnostic pins (DIAG and STB pin).
The temperature pre-warning level and clip detection levels can be programmed via the I2C-bus.
The status of each amplifier channel (i.
e.
output offset, load connected or not, short circui...
Similar Datasheet