Part Number | UPD168113 |
Manufacturer | NEC |
Title | SERIAL CONTROL 7-CHANNEL H-BRIDGE DRIVER |
Description | The µ PD168113 is a serial control 7-channel H-bridge driver that consists of a CMOS controller and a MOS output stage. It can reduce the current ... |
Features |
• Seven H-bridge circuits employing power MOS FET • Low-voltage driving VDD = 2.7 to 3.6 V VM = 2.7 to 5.5 V • Output on-state resistance: 1.0 Ω TYP., 1.5 Ω MAX. (sum of top and bottom stage) • Output current 1 ch to 6 ch DC current: 0.4 A/ch (when each channel is used independently) Peak current:... |
File Size | 771.22KB |
Datasheet |
|
UPD168116A : DATA SHEET MOS INTEGRATED CIRCUIT µ PD168116A 7-CHANNEL H-BRIDGE DRIVER WITH A MICRO STEP FUNCTION SUPPORTING PULSE INPUT DESCRIPTION The µ PD168116A is a 7-channel H-bridge driver with a micro step function supporting pulse input that consists of a CMOS control circuit and a MOS output stage. It can reduce the current consumption and the voltage loss at the output stage compared with a conventional driver using bipolar transistors, thanks to employment of a MOS process. The µ PD168116A can drive a stepping motor by inputting pulses, so that the number of signal lines necessary for controlling the motor can be decreased. The package is a 56-pin WQFN that helps reduce the mounting area and.
UPD168110 : DATA SHEET MOS INTEGRATED CIRCUIT µPD168110 MICROSTEP DRIVER FOR DRIVING CAMERA LENS DESCRIPTION The µPD168110 is a monolithic 2-channel H bridge driver that consists of a CMOS controller and a MOS output stage. It can reduce the current consumption and the voltage loss at the output stage compared with a conventional driver using bipolar transistors, thanks to employment of a MOS process. This product employs a P-channel MOSFET on the high side of the output stage, eliminating a charge pump. As a result, the circuit current consumption can be substantially reduced during operation. This product is ideal for driving the motor of a digital still camera as it can switch over between two-phase.