Part Number
|
WD1003 |
Manufacturer
|
Western Digital |
Description
|
User Guide |
Published
|
Jun 15, 2005 |
Detailed Description
|
WD1002 WD1003 WD1002 WD1003 USER’S GUIDE
800-1910 (REV. 4-87)
DOCUMENT SCOPE
This document describes the hardware and ...
|
Datasheet
|
WD1003
|
Overview
WD1002 WD1003 WD1002 WD1003 USER’S GUIDE
800-1910 (REV.
4-87)
DOCUMENT SCOPE
This document describes the hardware and software installation of the following boards: WD1002-WAH Winchester Disk Controller WDl002-WA2 Winchester/Floppy Disk Controller WDl003-WAH Winchester Disk Controller WDl003-WA2 Winchester/Floppy Disk Controller NOTE These controllers are designed for use in IBM Personal computer ATs or other AT-compatible computers with a 16bit data bus.
The use of the term controller refers to all boards described within this document.
When a specific reference is made to a particular board.
the appropriate WD part number is used.
4.
Attach 34-pin control connector pin 1 to J1 (J5 for WD...
Similar Datasheet