DatasheetsPDF.com

MAX483E

Maxim Integrated
Part Number MAX483E
Manufacturer Maxim Integrated
Description RS-485/RS-422 Transceivers
Published Jul 23, 2016
Detailed Description AVAILABLE MAX481E/MAX483E/MAX485E/ MAX487E–MAX491E/MAX1487E ±15kV ESD-Protected, Slew-Rate-Limited, Low-Power, RS-485/...
Datasheet PDF File MAX483E PDF File

MAX483E
MAX483E

Overview
AVAILABLE MAX481E/MAX483E/MAX485E/ MAX487E–MAX491E/MAX1487E ±15kV ESD-Protected, Slew-Rate-Limited, Low-Power, RS-485/RS-422 Transceivers General Description The MAX481E, MAX483E, MAX485E, MAX487E– MAX491E, and MAX1487E are low-power transceivers for RS-485 and RS-422 communications in harsh environments.
Each driver output and receiver input is protected against ±15kV electro-static discharge (ESD) shocks, without latchup.
These parts contain one driver and one receiver.
The MAX483E, MAX487E, MAX488E, and MAX489E feature reduced slew-rate drivers that minimize EMI and reduce reflections caused by improperly terminated cables, thus allowing error-free data transmission up to 250kbps.
The driver slew rates of the MAX481E, MAX485E, MAX490E, MAX491E, and MAX1487E are not limited, allowing them to transmit up to 2.
5Mbps.
These transceivers draw as little as 120µA supply current when unloaded or when fully loaded with disabled drivers (see Selector Guide).
Additionally, the MAX481E, MAX483E, and MAX487E have a low-current shutdown mode in which they consume only 0.
5µA.
All parts operate from a single +5V supply.
Drivers are short-circuit current limited, and are protected against excessive power dissipation by thermal shutdown circuitry that places their outputs into a high-impedance state.
The receiver input has a fail-safe feature that guarantees a logic-high output if the input is open circuit.
The MAX487E and MAX1487E feature quarter-unit-load receiver input impedance, allowing up to 128 transceivers on the bus.
The MAX488E–MAX491E are designed for full-dupFleuxnccotmimounnaiclatDioinas,gwrhailme tshe MAX481E, MAX483E, MAX485E, MAX487E, and MAX1487E are designed for half-duplex applications.
For applications that are not ESD sensitive see the pinand function-compatible MAX481, MAX483, MAX485, MAX487–MAX491, and MAX1487.
Applications Low-Power RS-485 Transceivers Low-Power RS-422 Transceivers Level Translators Transceivers for EMI-Sensitive Applications Industrial-...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)