DatasheetsPDF.com

SMF24C Datasheet PDF

HY
Part Number SMF24C
Manufacturer HY
Title SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS
Description SMF SERIES SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS . REVERSE VOLTAGE - 5.0 to 170 Volts POWER DISSIPATION ...
Features
● For surface mounted applications in order to optimize board space
● Low profile space SOD-123FL .114(2.9) .098(2.5) .077(1.95) .061(1.55)
● Glass passivated chip
● Low inductance
● Excellent clamping capability
● Very fast response time .039(1.0) .024(0.6)
● Typical ID less than 1µA at VWM
●...

File Size 141.23KB
Datasheet PDF File SMF24C PDF File


SMF24C SMF24C SMF24C




Similar Ai Datasheet

SMF-06020 : .

SMF05 : The SMF series TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD and other voltage-induced transient events. They are designed for use in applications where board space is at a premium. Each device will protect up to four lines. They are unidirectional devices and may be used on lines where the signal polarities are above ground. TVS diodes are solid-state devices designed specifically for transient suppression. They feature large cross-sectional area junctions for conducting high transient currents. They offer desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradat.

SMF05 : SMF05 ESD Protection Diode Array Quad, Low Clamping Voltage This quad monolithic silicon overvoltage suppressor is designed for applications requiring transient voltage protection capability. It is intended for use in ESD sensitive equipment such as computers, printers, cell phones, medical equipment, and other applications. Its quad junction common anode design protects four separate lines using only one package. These devices are ideal for situations where board space is at a premium. Specification Features • SC−88A Package Allows Four Separate Unidirectional Configurations • Low Leakage 5 mA @ 5 V • Breakdown Voltage: 6.1 V − 7.2 V @ 1 mA • Low Capacitance (90 pF TYP) • Provides Prote.

SMF05C : The SMF series TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD and other voltage-induced transient events. They are designed for use in applications where board space is at a premium. Each device will protect up to five lines. They are unidirectional devices and may be used on lines where the signal polarities are above ground. TVS diodes are solid-state devices designed specifically for transient suppression. They feature large cross-sectional area junctions for conducting high transient currents. They offer desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradat.

SMF05C : SMF05C, SMF12C, SMF15C, SMF24C 5−Line Transient Voltage Suppressor Array This 5−line voltage transient suppressor array is designed for application requiring transient voltage protection capability. It is intended for use in over−transient voltage and ESD sensitive equipment such as computers, printers, automotive electronics, networking communication and other applications. This device features a monolithic common anode design which protects five independent lines in a single SC−88 package. Features http://onsemi.com SC−88 FIVE TRANSIENT VOLTAGE SUPPRESSOR 100 W PEAK POWER MARKING DIAGRAM 6 SC−88 CASE 419B STYLE 24 1 XX MG G • Protects up to 5−Line in a Single SC−88 Package • Peak Power D.

SMF05C : The SMFxxC series are subminiature TVS suppressor arrays designed for the protection of sensitive IC components from the damaging effects of Electrostatic Discharge (ESD) and Electrial Fast Transients (EFT). This series is ideally suited for use in portable electronics such as SMART phones, laptops, as well as cellular phone base stations. The SMFxxC series provides protection in accordance with IEC 61000-4-2 and IEC 61000-4-4 requirements. This series is available in a SC70-6L package configuration and is rated at 100 Watts peak pulse power (8/20µs) per line. SC70-6L PACKAGE FEATURES • Compatible with IEC 61000-4-2 (ESD): Air 15kV, Contact 8kV • Compatible with IEC 61000-4-4 (EFT): 40A, .

SMF05CT1G : Low capacitance 5-fold ESD protection array in the very small SOT363 plastic package designed to protect up to five transmission or data lines from the damage caused by Electrostatic Discharge (ESD). Applications • Cellular handsets and accessories • Portable electronics • Computers and peripherals • Communications systems • Audio and video equipment. Features • Uni-directional ESD protection of up to five lines • Bi-directional ESD protection of up to four lines • Low diode capacitance • Low clamping voltage • low leakage current • IEC 61000-4-2; level 4 (ESD) • IEC61000-4-5 (surge) • S- Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC.

SMF05T1 : SMF05T1 Quad Array for ESD Protection This quad monolithic silicon voltage suppressor is designed for applications requiring transient overvoltage protection capability. It is intended for use in voltage and ESD sensitive equipment such as computers, printers, business machines, communication systems, medical equipment, and other applications. Its quad junction common anode design protects four separate lines using only one package. These devices are ideal for situations where board space is at a premium. Specification Features http://onsemi.com MARKING DIAGRAM 4 SC-88A/SOT-323 CASE 419A STYLE 5 5 60 MG G 1 2 3 • • • • • • • • • • SC88A Package Allows Four Separate Unidirectional Configura.

SMF06020 : .

SMF10 : SMF SERIES SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS . REVERSE VOLTAGE - 5.0 to 170 Volts POWER DISSIPATION - 200 Watts FEATURES ● For surface mounted applications in order to optimize board space ● Low profile space SOD-123FL .114(2.9) .098(2.5) .077(1.95) .061(1.55) ● Glass passivated chip ● Low inductance ● Excellent clamping capability ● Very fast response time .039(1.0) .024(0.6) ● Typical ID less than 1µA at VWM ● 200 W peak pulse power capability with a 10/1000 µs waveform ● Component in accordance to RoHS 2002/95/1 and WEEE 2002/96/EC MECHANICAL DATA ● Case: JEDEC SOD-123FL molded plastic over passivated chip ● Terminals: Solder plated, s.

SMF100 : SMF SERIES SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS . REVERSE VOLTAGE - 5.0 to 170 Volts POWER DISSIPATION - 200 Watts FEATURES ● For surface mounted applications in order to optimize board space ● Low profile space SOD-123FL .114(2.9) .098(2.5) .077(1.95) .061(1.55) ● Glass passivated chip ● Low inductance ● Excellent clamping capability ● Very fast response time .039(1.0) .024(0.6) ● Typical ID less than 1µA at VWM ● 200 W peak pulse power capability with a 10/1000 µs waveform ● Component in accordance to RoHS 2002/95/1 and WEEE 2002/96/EC MECHANICAL DATA ● Case: JEDEC SOD-123FL molded plastic over passivated chip ● Terminals: Solder plated, s.

SMF100A : TH97/10561QM TW00/17276EM IATF 0060636 SGS TH07/1033 SMF5.0A - SMF170A Stand- off Voltage : 5 to 170 V Peak Power : 200 W ZENER OVERVOLTAGE TRANSIENT SUPPRESSOR SOD-123FL 2.5(0.098) 2.9(0.114) 0.6(0.024) 1.0(0.039) 1.55(0.061) 1.95(0.077) 0.05(0.002) 0.25(0.010) FEATURES : * Stand-off voltage ; 5 - 170 Volts * Peak Power ; - 200 Watts @ 1 ms (SMF5.0A - SMF58A) - 175 Watts @ 1 ms (SMF60A - SMF170A) * Maximum clamp voltage @ Peak pulse current * Low leakage * Pb Free / RoHS Compliant MECHANICAL DATA : * Case: JEDEC SOD-123FL, molded plastic over passivated chip * Terminals: Solder Plated, solderable per MIL-STD-750, Method 2026 * Polarity: Color band denotes cathode end * Mounting posi.

SMF100A : SMF5.0(C)A THRU SMF170(C)A SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Stand - Off Voltage - 5.0 to 170 Volts Peak Pulse Power - 200 Watt 0.10-0.30 FEATURES ● Glass Passivated Die Construction ● Uni- and Bi-Directional Versions Available ● Excellent Clamping Capability ● Fast Response Time ● Plastic Case Material has UL Flammability Classification Rating 94V-O MECHANICAL DATA ● Case: SOD-123, Molded Plastic ● Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 ● Polarity: Cathode Band ● Weight: 0.017 grams 1.4 0.15 1.9 0.1 SOD-123FL Cathode Band Top View 2.8 0.1 0.6 0.25 3.7 0.2 Dimensions in inches and (millimeters) 1.0 0.2 Maximum Ratings and Electrical Characteristics @TA.

SMF100A : CYStech Electronics Corp. Surface Mount Transient Voltage Suppressors Peak Pulse Power 200W Working Voltage 5.0 to 190V SMF5.0A thru SMF190CA Spec. No. : C296SP Issued Date : 2011.06.20 Revised Date : 2016.05.17 Page No. : 1/9 Features  Glass passivated chip  Uni and Bidirectional unit  Excellent clamping capability  200W peak pulse power capability with a 10/1000μs waveform, repetition rate (duty cycle) : 0.01%  Very-fast response time  Low leakage  RoHS compliant Mechanical Data  Case : Molded plastic  Terminals: Pure tin plated, solderable per MIL-STD-750 method 2026  Polarity: For uni-directional types, the band denotes the cathode, which is positive with respective to the an.

SMF100A : SMF5.0A - SMF100A Taiwan Semiconductor 200W, 5V - 100V Surface Mount Transient Voltage Suppressor FEATURES ● Photo Glass passivated junction ● Low power loss, high efficiency ● Ideal for automated placement ● Excellent clamping capability ● Typical IR less than 1μA above 10V ● 200 watts peak pulse power capability with a 10 / 1000 μs waveform (VWM ≧ 60V, PPPM = 175W) ● Compliant to RoHS directive 2011/65/EU and in accordance to WEEE 2002/96/EC ● Halogen-free according to IEC 61249-2-21 KEY PARAMETERS PARAMETER VALUE UNIT VWM VBR (uni-directional) PPPM TJ MAX 5 - 100 6.8 - 117 200 175 V V W °C Package SOD-123W Configuration Single APPLICATIONS ● Switching mode power supply (SMPS).

SMF100A : SMF SERIES SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS . REVERSE VOLTAGE - 5.0 to 170 Volts POWER DISSIPATION - 200 Watts FEATURES ● For surface mounted applications in order to optimize board space ● Low profile space SOD-123FL .114(2.9) .098(2.5) .077(1.95) .061(1.55) ● Glass passivated chip ● Low inductance ● Excellent clamping capability ● Very fast response time .039(1.0) .024(0.6) ● Typical ID less than 1µA at VWM ● 200 W peak pulse power capability with a 10/1000 µs waveform ● Component in accordance to RoHS 2002/95/1 and WEEE 2002/96/EC MECHANICAL DATA ● Case: JEDEC SOD-123FL molded plastic over passivated chip ● Terminals: Solder plated, s.

SMF100A : Transient Voltage Suppressor Production specification SMF5V0A--SMF220A Features  For surface mounted applications  Low profile package  Low incremental surge resistance, excellent clamping capability  200W peak pulse power capability with a  10/1000μs wave from, repetition rate (duty cycle):0.01%  High temperature soldering guaranteed: 260°C /10 seconds, at terminals  RoHS Compliant Mechanical Data  Case: SOD-123FL molded plastic  Molding compound, UL flammability classification rating 94V-0  Polarity: Color band denotes cathode end Maximum Ratings (@TA = 25°C unless otherwise specified) Parameter Symbol Non-repetitive peak pulse power dissipation with a 10/1000μs waveform (N.




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)