DatasheetsPDF.com

5KP64

Part Number 5KP64
Manufacturer MCC
Title 5000 Watt Transient Voltage Suppressors
Description MCC TM Micro Commercial Components   omponents 20736 Marilla Street Chatsworth    !"# $ %    !...
Features
• Unidirectional And Bidirectional
• UL Recognized File # E331408
• High Temp Soldering: 260°C for 10 Seconds At Terminals
• For Bidirectional Devices Add “C” To The Suffix Of The Part Number: i.e. 5KP6.5C or 5KP6.5CA for 5% Tolerance Devices
• Epoxy meets UL 94 V-0 flammability rating
• Moisture Se...

File Size 375.75KB
Datasheet 5KP64 PDF File







Similar Datasheet

5KP6.0 : 5KP SERIES 5000 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS FEATURES * 5000 Watts Surge Capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1 A above 10V VOLTAGE RANGE 5.0 to 440 Volts 5000 Watts Peak Power R-6 .360(9.1) .340(8.6) DIA. 1.0(25.4) MIN. MECHANICAL DATA * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant * Lead: Axial leads, solderable per MIL-STD-202, method 208 guranteed * Polarity: Color band denotes cathode end * Mounting position: Any .360(9.1) .340(8.6) .052(1.3) .048(1.2) DIA. 1.0(25.4) MIN. Dimensions in inches and (millimeters) MAXIM.

5KP6.0 : The 5KP series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features u Glass passivated chip junction in P600 Package u Low leakage u Uni and Bidirectional unit u Excellent clamping capability u 5000W Peak power capability at 10 × 1000µs waveform Repetition rate (duty cycle):0.01% u Fast response time: typically less than 1.0ps from 0 Volts to VBR min u Typical IR less than 5μA above 12V. u High Temperature soldering: 260°C/40 seconds at terminals u Typical maximum temperature coefficient ΔVBR = 0.1% × VBR@25°C× ΔT u Plastic package has Underwriters Laboratory Flammability 94V-0 u Matte tin.

5KP6.0 : These Microsemi 5 kW Transient Voltage Suppressors (TVSs) are designed for applications requiring protection of voltage-sensitive electronic devices that may be damaged by harsh or severe voltage transients including lightning per IEC61000-4-5 and classes with various source impedances described herein. This series is available in 5.0 to 110 volt standoff voltages (VWM) in both unidirectional and bidirectional offered in two different package designs for axial and radial configurations. Microsemi also offers numerous other TVS products to meet higher and lower power demands and special applications. APPEARANCE CASE 5A (DO-204AR) CASE 5R IMPORTANT: For the most current data, consult MICROSE.

5KP6.0 : 5KP5.0-5KP110A High-reliability discrete products and engineering services since 1977 5000W TRANSIENT VOLTAGE SUPPRESSOR FEATURES  Axial and radial available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number  Available as non-RoHS (Sn/Pb plating), standard, and as RoHS by adding “-PBF” suffix.  Available in both axial leaded and radial packages (“R” prefix for radial packages)  Selections for 5.0 to 110 volts standoff voltage  Suppresses transients up to 5000 watts @ 10/10000µa and 34000 watts @ 8/20µs  Fast response MAXIMUM RATINGS Rating Peak Pulse Power Dissipation @ 25°C Impulse Repetition Rate (Duty factor) tclamping (0 vol.

5KP6.0 : SEP ELECTRONIC CORP. 5KP Series 5000 Watt Peak Power Transient Voltage Suppressors Reverse Stand-off Voltage 5.0 to 180 V Features 5000 Watts surge capability at 1ms Excellent clamping capability Low zener impedance Fast response time: typically less than 1.0ps from 0 Volt to 8 Volt min. Typical IR less than 1 A above 10 V High temperature soldering guaranteed 265 C/10 seconds at 5 lbs (2.3kg) tension Mechanical Data Case: Molded plastic Terminals: Solder plated solderable per MIL-STD-202, Method 208 Polarity: Cathode band Mounting Position: Any Weight: 2.1 grams (approx) R-6 .052(1.3) .048(1.2) 1.0(25.4) MIN. .340(9.1) .360(8.6) .340(9.1) .360(8.6) 1.0(25.4) MIN. All dimensions inc.

5KP6.0 : LITE-ON SEMICONDUCTOR GLASS PASSIVATED UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS 5KP SERIES REVERSE VOLTAGE - 5.0 to 180 Volts POWER DISSIPATION - 5000 WATTS FEATURES Glass passivated chip Low leakage Uni and Bidirectional unit Excellent clamping capability The plastic material has U/L recognition 94V-O Fast response time MECHANICAL DATA Case : Molded Plastic Marking : Unidirectional - type number and cathode band Bidirectional - type number only Weight : 0.07 ounces, 2.1 grams R-6 AB A C D R-6 Dim. Min. Max. A 25.4 B 8.60 9.10 C 1.22 1.32 D 8.60 9.10 All Dimensions in millimeter MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unl.

5KP6.0 : ® WON-TOP ELECTRONICS Features  Glass Passivated Die Construction  5000W Peak Pulse Power Dissipation  5.0V – 440V Standoff Voltage  Uni- and Bi-Directional Versions Available  Excellent Clamping Voltage  Typical Response Time < 1nS  Plastic Case Material has UL Flammability Classification Rating 94V-0 Mechanical Data  Case: P-600, Molded Plastic  Terminals: Plated Leads Solderable per MIL-STD-202, Method 208  Polarity: Cathode Band Except Bi-Directional  Weight: 2.10 grams (approx.)  Mounting Position: Any  Marking: Type Number  Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Part Number, See Page 6 5KP SERIES 5000W TRANSIENT VOLTAGE SUPPRESSOR Pb AB A D P-600.

5KP6.0 : .

5KP6.0 : 5KP5.0 THRU 5KP110A TRANSZORB™ TRANSIENT VOLTAGE SUPPRESSOR Stand-off Voltage - 5.0 to 110 Volts Case Style P600 Peak Pulse Power - 5000 Watts FEATURES ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ Glass passivated junction ♦ 5000W peak pulse power capability with a 10/1000µs waveform, repetition rate (duty cycle): 0.05% ♦ Excellent clamping capability ♦ Low incremental surge resistance ♦ Fast response time: typically less than 1.0ps from 0 Volts to V(BR) ♦ Devices with V(BR)>10V ID are typically ID less than 1.0µA ♦ High temperature soldering guaranteed: 265°C/10 seconds, 0.375" (9.5mm) lead length, 5lbs. (2.3 kg) tension 1.0 (25.4) MIN. 0.360 (9.1) 0.3.

5KP6.0 : E480232 Features • For Bidirectional Devices Add “C” To The Suffix of The Part Number: i.e. 5KP6.5CA for 5% Tolerance Devices • High Temp Soldering: 260°C for 10 Seconds At Terminals • Unidirectional and Bidirectional Unit • Halogen Free Available Upon Request By Adding Suffix "-HF" • Moisture Sensitivity Level 1 • Epoxy Meets UL 94 V-0 Flammability Rating • Lead Free Finish/RoHS Compliant (Note1) ("P" Suffix Designates RoHS Compliant. See Ordering Information) Maximum Ratings • Operating Junction Temperature Range: -55°C to +175°C • Storage Temperature Range: -55°C to +175°C • Typical Thermal Resistance: 8.0°C/W Junction to Lead • Typical Thermal Resistance: 40°C/W Junction to Ambient Peak.

5KP6.0 : The 5KP Series, are discrete 5,000 Watt, silicon transient voltage suppressors (TVS) designed for use in applications where large voltage transients can permanently damage voltage sensitive components and equipment. The 5KP series is available in voltages ranging from 5V to 440V with 5 percent and 5 and 10 percent tolerances. Both tolerances are referenced to the power supply output or operating voltage level. This series is compatiable with IEC 61000-4-5 (Surge) requirements. AXIAL LEAD PACKAGE FEATURES • Compatible with IEC 61000-4-5 (Surge): 48A, 8/20µs - L3(Line- Ground), L4(Line-Line) & L1 (Power) • 5,000 Watts Peak Pulse Power per Line (tp = 10/1000µs) • Unidirectional and Bid.

5KP6.0A : 5KP SERIES 5000 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS FEATURES * 5000 Watts Surge Capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1 A above 10V VOLTAGE RANGE 5.0 to 440 Volts 5000 Watts Peak Power R-6 .360(9.1) .340(8.6) DIA. 1.0(25.4) MIN. MECHANICAL DATA * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant * Lead: Axial leads, solderable per MIL-STD-202, method 208 guranteed * Polarity: Color band denotes cathode end * Mounting position: Any .360(9.1) .340(8.6) .052(1.3) .048(1.2) DIA. 1.0(25.4) MIN. Dimensions in inches and (millimeters) MAXIM.

5KP6.0A : The 5KP series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features u Glass passivated chip junction in P600 Package u Low leakage u Uni and Bidirectional unit u Excellent clamping capability u 5000W Peak power capability at 10 × 1000µs waveform Repetition rate (duty cycle):0.01% u Fast response time: typically less than 1.0ps from 0 Volts to VBR min u Typical IR less than 5μA above 12V. u High Temperature soldering: 260°C/40 seconds at terminals u Typical maximum temperature coefficient ΔVBR = 0.1% × VBR@25°C× ΔT u Plastic package has Underwriters Laboratory Flammability 94V-0 u Matte tin.

5KP6.0A : These Microsemi 5 kW Transient Voltage Suppressors (TVSs) are designed for applications requiring protection of voltage-sensitive electronic devices that may be damaged by harsh or severe voltage transients including lightning per IEC61000-4-5 and classes with various source impedances described herein. This series is available in 5.0 to 110 volt standoff voltages (VWM) in both unidirectional and bidirectional offered in two different package designs for axial and radial configurations. Microsemi also offers numerous other TVS products to meet higher and lower power demands and special applications. APPEARANCE CASE 5A (DO-204AR) CASE 5R IMPORTANT: For the most current data, consult MICROSE.

5KP6.0A : 5KP5.0-5KP110A High-reliability discrete products and engineering services since 1977 5000W TRANSIENT VOLTAGE SUPPRESSOR FEATURES  Axial and radial available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number  Available as non-RoHS (Sn/Pb plating), standard, and as RoHS by adding “-PBF” suffix.  Available in both axial leaded and radial packages (“R” prefix for radial packages)  Selections for 5.0 to 110 volts standoff voltage  Suppresses transients up to 5000 watts @ 10/10000µa and 34000 watts @ 8/20µs  Fast response MAXIMUM RATINGS Rating Peak Pulse Power Dissipation @ 25°C Impulse Repetition Rate (Duty factor) tclamping (0 vol.

5KP6.0A : SEP ELECTRONIC CORP. 5KP Series 5000 Watt Peak Power Transient Voltage Suppressors Reverse Stand-off Voltage 5.0 to 180 V Features 5000 Watts surge capability at 1ms Excellent clamping capability Low zener impedance Fast response time: typically less than 1.0ps from 0 Volt to 8 Volt min. Typical IR less than 1 A above 10 V High temperature soldering guaranteed 265 C/10 seconds at 5 lbs (2.3kg) tension Mechanical Data Case: Molded plastic Terminals: Solder plated solderable per MIL-STD-202, Method 208 Polarity: Cathode band Mounting Position: Any Weight: 2.1 grams (approx) R-6 .052(1.3) .048(1.2) 1.0(25.4) MIN. .340(9.1) .360(8.6) .340(9.1) .360(8.6) 1.0(25.4) MIN. All dimensions inc.

5KP6.0A : LITE-ON SEMICONDUCTOR GLASS PASSIVATED UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS 5KP SERIES REVERSE VOLTAGE - 5.0 to 180 Volts POWER DISSIPATION - 5000 WATTS FEATURES Glass passivated chip Low leakage Uni and Bidirectional unit Excellent clamping capability The plastic material has U/L recognition 94V-O Fast response time MECHANICAL DATA Case : Molded Plastic Marking : Unidirectional - type number and cathode band Bidirectional - type number only Weight : 0.07 ounces, 2.1 grams R-6 AB A C D R-6 Dim. Min. Max. A 25.4 B 8.60 9.10 C 1.22 1.32 D 8.60 9.10 All Dimensions in millimeter MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unl.




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)