DatasheetsPDF.com

MIC2547

Micrel Semiconductor
Part Number MIC2547
Manufacturer Micrel Semiconductor
Description Dual Programmable Current Limit Switch
Published Mar 28, 2018
Detailed Description MIC2546/2547 Dual Programable Current Limit Switch General Description Features The MIC2546 and MIC2547 are integrate...
Datasheet PDF File MIC2547 PDF File

MIC2547
MIC2547

Overview
MIC2546/2547 Dual Programable Current Limit Switch General Description Features The MIC2546 and MIC2547 are integrated high-side dual power switches optimized for low loss dc power switching and other power management applications, including Advanced Configuration and Power Interface (ACPI).
The MIC2546/47 is a cost-effective, highly integrated solution that requires few external components to satisfy USB and ACPI requirements.
Load current management features include a precision resistor-programmable output current-limit and a soft-start circuit which minimizes inrush current when the switch is enabled.
Thermal shutdown, along with current-limit, protects theswitch and the attached device.
The MIC2546/47’s open-drain flag outputs are used to indicate current-limiting or thermal shutdown to a local controller.
The MIC2547 has an additional internal latch which turns the output off upon thermal shutdown providing robust fault control.
The enable signal is compatible with both 3V and 5V logic, and is also used as the thermal shutdown latch reset for the MIC2547.
The MIC2546 and MIC2547 are available in active-high and active-low enable versions in 16-pin TSSOP and SOP packages.
Data sheets and support documentation can be found on Micrel’s web site at www.
micrel.
com.
• 2.
7V to 5.
5V input • Adjustable current-limit up to 1.
5A • Reverse current flow blocking (no “body diode”) • 100μA typical on-state supply current per channel • 2μA typical off-state supply current • 120mΩ maximum on-resistance • Open-drain fault flag • Thermal shutdown • Thermal shutdown output latch (MIC2547) • 2ms (slow) turn-on and fast turnoff • Available with active-high or active-low enable Applications • USB power distribution • PCI Bus Power Switching • Notebook PC • ACPI power distribution • PC card hot swap applications • Inrush current-limiting • Ideal for dual supply applications ___________________________________________________________________________________________________________...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)