DatasheetsPDF.com

OCH169

Part Number	OCH169
Manufacturer	Orient Chip
Description	Micro Power Omnipolar Hall-effect Sensor Switch
Published	Oct 16, 2018
Detailed Description	WWW.ORIENT-CHIP.COM OCH169 Micro Power Omnipolar Hall-effect Sensor Switch ◼ General Description The OCH169 Omnipolar ...
Datasheet	OCH169 PDF File

Overview

WWW.
ORIENT-CHIP.
COM OCH169 Micro Power Omnipolar Hall-effect Sensor Switch ◼ General Description The OCH169 Omnipolar Hall effect sensor IC is fabricated from mixed signal CMOS technology.
It is comprised of two Hall plates and a CMOS output driver, mainly designed for battery-operation, hand-held equipment (such as Cellular and Cordless Phone, PDA).
The total power consumption in normal operation is typically 24μW with a 3V power source.
Either north or south poles of sufficient strength will turn the output on.
The output will be turned off under no magnetic field.
While the magnetic flux density (B) is larger than operating point (BOP), the output will be turned on (low), the output is held until B is lower than release point (BRP), and then turned off.
The OCH169 is available in many flexible packaging options, such as SIP-3L, TSOT23-3L, and DFN2020-6L,DFN2020-3L,Operating temperature range of the OCH169 is from -40°C to 85°C.
To minimize the BOM cost, capacitors of the MLCC...

Similar Datasheet

OCH140 Bipolar Hall Effect Position Sensor - Orient Chip
OCH141 Bipolar Hall Effect Position Sensor - Orient Chip
OCH143 Bipolar Hall Effect Position Sensor - Orient Chip
OCH1440 Bipolar Hall Effect Position Sensor - Orient Chip
OCH1441 Bipolar Hall Effect Position Sensor - Orient Chip
OCH1443 60V High Voltage Unipolar Hall Effect Position Sensor - Orient Chip
OCH145 Unipolar Hall Effect Digital Switches - Orient Chip
OCH146 Bipolar Hall Effect Position Sensor - Orient Chip
OCH147 Bipolar Hall Effect Position Sensor - Orient Chip
OCH147H Hall Effect Latched Sensor - Orient Chip

Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)