DatasheetsPDF.com

P4SMA16A Datasheet PDF

JIEJIE
Part Number P4SMA16A
Manufacturer JIEJIE
Title 400W Transient Voltage Suppressor
Description   TVS diodes can be used in a wide range of applications which like consumer electronic products, automotive industries, munitions, telecommunicat...
Features   Low profile package. Low inductance. Excellent clamping capability. 400W peak pulse power capability at 10×1000μs waveform. Typical IR less than 1μA above 11V. Fast response time: typically less than 1.0ps from 0V to VBR min. High temperature to reflow soldering:260℃/40s at terminal...

File Size 265.10KB
Datasheet PDF File P4SMA16A PDF File


P4SMA16A P4SMA16A P4SMA16A




Similar Ai Datasheet

P4SMA10 : P4SMA6V8.... P4SMA440A P4SMA6V8C.. P4SMA260CA 400 W Surface Mount Transient Voltage Suppressor DO-214AC (SMA) Voltage 6.8 V to 440 V (Uni) 6.8 V to 260 V (Bid) Power 400 W /ms R FEATURES • Low profile package • Ideal for automated placement • 400 W peak pulse power capability with a 10/1000 µs waveform, repetitive rate (duty cycle): 0.01 % • Excellent clamping capability • Very fast response time • Low incremental surge resistance • Available in uni-directional and bi-directional • Solder dip 260ºC, 10s • Component in accordance to RoHS 2011/65/EU and WEEE 2002/96/EC • Meets MSL level 1, per J-STD-020, LF maximum peak of 260º C • Halogen-free available according to IEC 61249-.

P4SMA10 : P4SMA6.8~P4SMA250CA SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR POWER 400 Watt BREAK DOWN VOLTAGE 6.8 to 250 Volt FEATURES • For surface mounted applications in order to optimize board space • Glass passivated junction • Low inductance • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • High temperature soldering : 260°C /10 seconds at terminals • ESD IEC-61000-4-2 Air + 30kV, Contact + 30kV • Lead free in compliance with EU RoHS2.0 (2011/65/EU & 2015/865/EU directive) • Green molding compound as per IEC61249 Std. . (Halogen Free) MECHANICAL DATA • Case: JEDEC DO-214AC,Molded plastic over passivated junction. • Terminals: Solder plated,solderable per MIL-STD.

P4SMA10 : P4SMA6.8(A) – P4SMA200(A) Taiwan Semiconductor 400W, 6.8V - 200V Surface Mount Transient Voltage Suppressor FEATURES ● Low profile package ● Ideal for automated placement ● Glass passivated junction ● Excellent clamping capability ● Fast response time: Typically less than 1.0ps ● Typical IR less than 1μA above 10V ● Compliant to RoHS directive 2011/65/EU and in accordance to WEEE 2002/96/EC ● Halogen-free according to IEC 61249-2-21 APPLICATIONS ● Switching mode power supply (SMPS) ● Adapters ● Lighting application ● On-board DC/DC converter KEY PARAMETERS PARAMETER VALUE UNIT VWM VBR PPPM tp = 10/1000 μs waveform TJ MAX 5.5 - 171 6.12 - 210 400 150 V V W °C Package DO-214AC (SMA) .

P4SMA10 : P4SMA Transient Voltage Suppressor VBR : 6.8 - 440 Volts PPK : 400 Watts Features • 400W surge capability at 1ms • Excellent clamping capability • Low zener impedance • Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) • Typical IR less then 1μA above 10V • RoHS compliant package • AEC-Q101 compliant available Applications • For Bi-directional use C or CA Suffix • Electrical characteristics apply in both directions Mechanical Data • Case : SMA Molded plastic • Epoxy : UL94V-0 rate flame retardant • Lead : Axial lead solderable per MIL-STD-202, method 208 guaranteed Graphic symbol • Polarity : Color band denotes cathode end • Mounting position : Any .

P4SMA10 : Production specification TRANSIENT VOLTAGE SUPPRESSOR FEATURES z Plastic package has Underwriters Laboratory Flammability Classification 94V-0 z Glass passivated junction z 400 Wsurge capability at10×1000us waveform, Duty cycle:0.01% z Excellent clamping capability z Low zener impedance z Fast response time:Typically less then 1.0ps from 0 volts to BV min. z Typical IR less then 1 μΑ above 10V z High temperature soldering guaranteed:250℃/10 seconds at terminals. MECHANICAL DATA z Case: Molded plastic z Epoxy: UL94V-0 rate flame retardant z Lead: MIL-STD- 202E, Method 208 guaranteed z Polarity: olor band denotes cathode end z Packaging:12mm tape per EIA STD RS-481 z Mounting position: Any P.

P4SMA10 : E-DA SEMICONDUCTOR RoHS Compliant Product P4SMA6.8-P4SMA550A TRANSIENT VOLTAGE SUPPRESSOR BREAK DOWN VOLTAGE 6.8 to 550 Volt POWER 400 Watt 0.062(1.60) 0.047(1.20) 0.114(2.90) 0.098(2.50) 0.181(4.60) 0.157(4.00) FEATURES   Green • For surface mounted applications in order to optimize board space • Glass passivated junction • Low inductance • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • High temperature soldering : 260°C /10 seconds at terminals 0.012(0.305) 0.006(0.152) 0.060(1.52) 0.030(0.76) 0.008(0.203) 0.002(0.051) 0.208(5.28) 0.188(4.80) MECHANICAL DATA • Case: JEDEC DO-214AC,Molded plastic over passivated junction. • Terminals: Solder plat.

P4SMA10 : P4SMA6.8A(CA) - P4SMA440A(CA) SURFACE MOUNT TRANSIENT VOLAGE SUPPESSOR DIODE VOLTAGE RANGE: 6.8 - 440 V POWER: 400Wa t t s Features ! Glass Passivated Die Construction ! Uni- and Bi-Directional Versions Available ! Excellent Clamping Capability ! Fast Response Time ! Plastic Material: UL Flammability Classification Rating 94V-0 Mechanical Data ! Case: SMA, Transfer Molded Epoxy ! Terminals: Solderable per MIL-STD-202, Method 208 ! Polarity Indicator: Cathode Band (Note: Bi-directional devices have no polarity indicator.) ! Marking: Date Code and Marking Code See Page 2 ! Weight: 0.064 grams (approx.) B A J H G E SMA(DO-214AC) Dim Min Max C A 2.29 2.92 B 4.00 4.60 C 1.27 1.63 D D 0.15 0..

P4SMA10 : Features * For surface mounted application * Low profile package * Glass passivated junction * Excellent clamping capability * Fast response time: typically less than 1.0ps from 0 volts to BV min * Typical IR less than 1μA above 10V * High temperature soldering: 260℃/10 seconds at terminals * Plastic material used carries underwriters laboratory flammability classifications 94V-0 P4SMA6.8A THRU P4SMA550A Surface Mount Transient Voltage Suppressors Diodes Package Outline Dimensions in inches (millimeters) SMA: Mechanical Data * Case: Molded plastic * Terminals: Matte tin plated leads, solderable per JESD22-B102 * Polarity: Indicated by cathode band * Standard Packaging: 12mm tape per EIA S.

P4SMA100 : P4SMA6V8.... P4SMA440A P4SMA6V8C.. P4SMA260CA 400 W Surface Mount Transient Voltage Suppressor DO-214AC (SMA) Voltage 6.8 V to 440 V (Uni) 6.8 V to 260 V (Bid) Power 400 W /ms R FEATURES • Low profile package • Ideal for automated placement • 400 W peak pulse power capability with a 10/1000 µs waveform, repetitive rate (duty cycle): 0.01 % • Excellent clamping capability • Very fast response time • Low incremental surge resistance • Available in uni-directional and bi-directional • Solder dip 260ºC, 10s • Component in accordance to RoHS 2011/65/EU and WEEE 2002/96/EC • Meets MSL level 1, per J-STD-020, LF maximum peak of 260º C • Halogen-free available according to IEC 61249-.

P4SMA100 : P4SMA6.8~P4SMA250CA SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR POWER 400 Watt BREAK DOWN VOLTAGE 6.8 to 250 Volt FEATURES • For surface mounted applications in order to optimize board space • Glass passivated junction • Low inductance • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • High temperature soldering : 260°C /10 seconds at terminals • ESD IEC-61000-4-2 Air + 30kV, Contact + 30kV • Lead free in compliance with EU RoHS2.0 (2011/65/EU & 2015/865/EU directive) • Green molding compound as per IEC61249 Std. . (Halogen Free) MECHANICAL DATA • Case: JEDEC DO-214AC,Molded plastic over passivated junction. • Terminals: Solder plated,solderable per MIL-STD.

P4SMA100 : P4SMA6.8(A) – P4SMA200(A) Taiwan Semiconductor 400W, 6.8V - 200V Surface Mount Transient Voltage Suppressor FEATURES ● Low profile package ● Ideal for automated placement ● Glass passivated junction ● Excellent clamping capability ● Fast response time: Typically less than 1.0ps ● Typical IR less than 1μA above 10V ● Compliant to RoHS directive 2011/65/EU and in accordance to WEEE 2002/96/EC ● Halogen-free according to IEC 61249-2-21 APPLICATIONS ● Switching mode power supply (SMPS) ● Adapters ● Lighting application ● On-board DC/DC converter KEY PARAMETERS PARAMETER VALUE UNIT VWM VBR PPPM tp = 10/1000 μs waveform TJ MAX 5.5 - 171 6.12 - 210 400 150 V V W °C Package DO-214AC (SMA) .

P4SMA100 : P4SMA Transient Voltage Suppressor VBR : 6.8 - 440 Volts PPK : 400 Watts Features • 400W surge capability at 1ms • Excellent clamping capability • Low zener impedance • Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) • Typical IR less then 1μA above 10V • RoHS compliant package • AEC-Q101 compliant available Applications • For Bi-directional use C or CA Suffix • Electrical characteristics apply in both directions Mechanical Data • Case : SMA Molded plastic • Epoxy : UL94V-0 rate flame retardant • Lead : Axial lead solderable per MIL-STD-202, method 208 guaranteed Graphic symbol • Polarity : Color band denotes cathode end • Mounting position : Any .

P4SMA100 : Production specification TRANSIENT VOLTAGE SUPPRESSOR FEATURES z Plastic package has Underwriters Laboratory Flammability Classification 94V-0 z Glass passivated junction z 400 Wsurge capability at10×1000us waveform, Duty cycle:0.01% z Excellent clamping capability z Low zener impedance z Fast response time:Typically less then 1.0ps from 0 volts to BV min. z Typical IR less then 1 μΑ above 10V z High temperature soldering guaranteed:250℃/10 seconds at terminals. MECHANICAL DATA z Case: Molded plastic z Epoxy: UL94V-0 rate flame retardant z Lead: MIL-STD- 202E, Method 208 guaranteed z Polarity: olor band denotes cathode end z Packaging:12mm tape per EIA STD RS-481 z Mounting position: Any P.

P4SMA100 : Features * For surface mounted application * Low profile package * Glass passivated junction * Excellent clamping capability * Fast response time: typically less than 1.0ps from 0 volts to BV min * Typical IR less than 1μA above 10V * High temperature soldering: 260℃/10 seconds at terminals * Plastic material used carries underwriters laboratory flammability classifications 94V-0 P4SMA6.8A THRU P4SMA550A Surface Mount Transient Voltage Suppressors Diodes Package Outline Dimensions in inches (millimeters) SMA: Mechanical Data * Case: Molded plastic * Terminals: Matte tin plated leads, solderable per JESD22-B102 * Polarity: Indicated by cathode band * Standard Packaging: 12mm tape per EIA S.

P4SMA100 : P4SMA6.8A(CA) - P4SMA440A(CA) SURFACE MOUNT TRANSIENT VOLAGE SUPPESSOR DIODE VOLTAGE RANGE: 6.8 - 440 V POWER: 400Wa t t s Features ! Glass Passivated Die Construction ! Uni- and Bi-Directional Versions Available ! Excellent Clamping Capability ! Fast Response Time ! Plastic Material: UL Flammability Classification Rating 94V-0 Mechanical Data ! Case: SMA, Transfer Molded Epoxy ! Terminals: Solderable per MIL-STD-202, Method 208 ! Polarity Indicator: Cathode Band (Note: Bi-directional devices have no polarity indicator.) ! Marking: Date Code and Marking Code See Page 2 ! Weight: 0.064 grams (approx.) B A J H G E SMA(DO-214AC) Dim Min Max C A 2.29 2.92 B 4.00 4.60 C 1.27 1.63 D D 0.15 0..

P4SMA100 : E-DA SEMICONDUCTOR RoHS Compliant Product P4SMA6.8-P4SMA550A TRANSIENT VOLTAGE SUPPRESSOR BREAK DOWN VOLTAGE 6.8 to 550 Volt POWER 400 Watt 0.062(1.60) 0.047(1.20) 0.114(2.90) 0.098(2.50) 0.181(4.60) 0.157(4.00) FEATURES   Green • For surface mounted applications in order to optimize board space • Glass passivated junction • Low inductance • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • High temperature soldering : 260°C /10 seconds at terminals 0.012(0.305) 0.006(0.152) 0.060(1.52) 0.030(0.76) 0.008(0.203) 0.002(0.051) 0.208(5.28) 0.188(4.80) MECHANICAL DATA • Case: JEDEC DO-214AC,Molded plastic over passivated junction. • Terminals: Solder plat.

P4SMA100A : P4SMA6V8.... P4SMA440A P4SMA6V8C.. P4SMA260CA 400 W Surface Mount Transient Voltage Suppressor DO-214AC (SMA) Voltage 6.8 V to 440 V (Uni) 6.8 V to 260 V (Bid) Power 400 W /ms R FEATURES • Low profile package • Ideal for automated placement • 400 W peak pulse power capability with a 10/1000 µs waveform, repetitive rate (duty cycle): 0.01 % • Excellent clamping capability • Very fast response time • Low incremental surge resistance • Available in uni-directional and bi-directional • Solder dip 260ºC, 10s • Component in accordance to RoHS 2011/65/EU and WEEE 2002/96/EC • Meets MSL level 1, per J-STD-020, LF maximum peak of 260º C • Halogen-free available according to IEC 61249-.




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)