DatasheetsPDF.com

P4SMA400A Datasheet PDF


Part Number P4SMA400A
Manufacturer JIEJIE
Title 400W Transient Voltage Suppressor
Description   TVS diodes can be used in a wide range of applications which like consumer electronic products, automotive industries, munitions, telecommunicat...
Features   Low profile package. Low inductance. Excellent clamping capability. 400W peak pulse power capability at 10×1000μs waveform. Typical IR less than 1μA above 11V. Fast response time: typically less than 1.0ps from 0V to VBR min. High temperature to reflow soldering:260℃/40s at terminal...

File Size 265.10KB
Datasheet P4SMA400A PDF File








Similar Ai Datasheet

P4SMA400 : P4SMA Transient Voltage Suppressor VBR : 6.8 - 440 Volts PPK : 400 Watts Features • 400W surge capability at 1ms • Excellent clamping capability • Low zener impedance • Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) • Typical IR less then 1μA above 10V • RoHS compliant package • AEC-Q101 compliant available Applications • For Bi-directional use C or CA Suffix • Electrical characteristics apply in both directions Mechanical Data • Case : SMA Molded plastic • Epoxy : UL94V-0 rate flame retardant • Lead : Axial lead solderable per MIL-STD-202, method 208 guaranteed Graphic symbol • Polarity : Color band denotes cathode end • Mounting position : Any .

P4SMA400 : P4SMA220 ... P4SMA550CA P4SMA220 ... P4SMA550CA SMD Transient Voltage Suppressor Diodes SMD Spannungs-Begrenzer-Dioden PPPM = 400W PM(AV) = 1.0 W Tjmax = 150°C VWM = 175 ... 495 V VBR = 220 ... 550 V Version 2016-05-31 ~ SMA / ~ DO-214AC 5± 0.2 Typical Applications Over-voltage protection ESD protection Free-wheeling diodes Commercial grade 1) Typische Anwendungen Schutz gegen Überspannung ESD-Schutz Freilauf-Dioden Standardausführung 1) 2.1± 0.2 2.2± 0.2 1± 0.3 Type Typ 0.15 1.5±0.1 4.5± 0.3 Features Besonderheiten Uni- and Bidirectional versions Uni- und Bidirektionale Versionen Peak pulse power of 400 W 400 W Impuls-Verlustleistung (10/1000 µs waveform) (10/1000 µs St.

P4SMA400 : Production specification TRANSIENT VOLTAGE SUPPRESSOR FEATURES z Plastic package has Underwriters Laboratory Flammability Classification 94V-0 z Glass passivated junction z 400 Wsurge capability at10×1000us waveform, Duty cycle:0.01% z Excellent clamping capability z Low zener impedance z Fast response time:Typically less then 1.0ps from 0 volts to BV min. z Typical IR less then 1 μΑ above 10V z High temperature soldering guaranteed:250℃/10 seconds at terminals. MECHANICAL DATA z Case: Molded plastic z Epoxy: UL94V-0 rate flame retardant z Lead: MIL-STD- 202E, Method 208 guaranteed z Polarity: olor band denotes cathode end z Packaging:12mm tape per EIA STD RS-481 z Mounting position: Any P.

P4SMA400 : Features * For surface mounted application * Low profile package * Glass passivated junction * Excellent clamping capability * Fast response time: typically less than 1.0ps from 0 volts to BV min * Typical IR less than 1μA above 10V * High temperature soldering: 260℃/10 seconds at terminals * Plastic material used carries underwriters laboratory flammability classifications 94V-0 P4SMA6.8A THRU P4SMA550A Surface Mount Transient Voltage Suppressors Diodes Package Outline Dimensions in inches (millimeters) SMA: Mechanical Data * Case: Molded plastic * Terminals: Matte tin plated leads, solderable per JESD22-B102 * Polarity: Indicated by cathode band * Standard Packaging: 12mm tape per EIA S.

P4SMA400 : P4SMA6.8A(CA) - P4SMA440A(CA) SURFACE MOUNT TRANSIENT VOLAGE SUPPESSOR DIODE VOLTAGE RANGE: 6.8 - 440 V POWER: 400Wa t t s Features ! Glass Passivated Die Construction ! Uni- and Bi-Directional Versions Available ! Excellent Clamping Capability ! Fast Response Time ! Plastic Material: UL Flammability Classification Rating 94V-0 Mechanical Data ! Case: SMA, Transfer Molded Epoxy ! Terminals: Solderable per MIL-STD-202, Method 208 ! Polarity Indicator: Cathode Band (Note: Bi-directional devices have no polarity indicator.) ! Marking: Date Code and Marking Code See Page 2 ! Weight: 0.064 grams (approx.) B A J H G E SMA(DO-214AC) Dim Min Max C A 2.29 2.92 B 4.00 4.60 C 1.27 1.63 D D 0.15 0..

P4SMA400A : P4SMA6V8.... P4SMA440A P4SMA6V8C.. P4SMA260CA 400 W Surface Mount Transient Voltage Suppressor DO-214AC (SMA) Voltage 6.8 V to 440 V (Uni) 6.8 V to 260 V (Bid) Power 400 W /ms R FEATURES • Low profile package • Ideal for automated placement • 400 W peak pulse power capability with a 10/1000 µs waveform, repetitive rate (duty cycle): 0.01 % • Excellent clamping capability • Very fast response time • Low incremental surge resistance • Available in uni-directional and bi-directional • Solder dip 260ºC, 10s • Component in accordance to RoHS 2011/65/EU and WEEE 2002/96/EC • Meets MSL level 1, per J-STD-020, LF maximum peak of 260º C • Halogen-free available according to IEC 61249-.

P4SMA400A : 400W Surface Mount Transient Voltage Suppressor P4SMA6.8A - P4SMA550CA 400W Surface Mount Transient Voltage Suppressor SMA Features z Breakdown voltage from 6.8 to 550 volts z Low inductance, excellent clamping capability z Repetition rate(duty cycle): 0.01% z Fast response time: typically less than 1.0ps from 0v to VBR z For surface mounted applications to optimize board space z Typical IR less than 1µA above 12V z High temperature soldering guaranteed:250°C/10 seconds at terminals z This series (P4SMA6.8A/CA to P4SMA440A/CA) is UL recognized under component index. File number E315008 z RoHS Compliant and Halogen Free Mechanical Data Case: Epoxy: Terminals: Polarity: Mounting position: We.

P4SMA400A : www.vishay.com P4SMA Series Vishay General Semiconductor Surface-Mount TRANSZORB® Transient Voltage Suppressors SMA (DO-214AC) Cathode Anode (unidirectional) (bidirectional) LINKS TO ADDITIONAL RESOURCES 3D 3D 3D Models PRIMARY CHARACTERISTICS VWM (unidirectional) VWM (bidirectional) VBR (unidirectional) VBR (bidirectional) PPPM PD IFSM (uni-directional only) TJ max. Polarity 5.8 V to 459 V 5.8 V to 185 V 6.8 V to 540 V 6.8 V to 220 V 400 W, 300 W 3.3 W 40 A 150 °C Unidirectional, bidirectional Package SMA (DO-214AC) DEVICES FOR BIDIRECTION APPLICATIONS For bidirectional devices use CA suffix (e.g. P4SMA10CA). Electrical characteristics apply in both directions. FEATURES • Lo.

P4SMA400A : P4SMA Transient Voltage Suppressor VBR : 6.8 - 440 Volts PPK : 400 Watts Features • 400W surge capability at 1ms • Excellent clamping capability • Low zener impedance • Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) • Typical IR less then 1μA above 10V • RoHS compliant package • AEC-Q101 compliant available Applications • For Bi-directional use C or CA Suffix • Electrical characteristics apply in both directions Mechanical Data • Case : SMA Molded plastic • Epoxy : UL94V-0 rate flame retardant • Lead : Axial lead solderable per MIL-STD-202, method 208 guaranteed Graphic symbol • Polarity : Color band denotes cathode end • Mounting position : Any .

P4SMA400A : P4SMA220 ... P4SMA550CA P4SMA220 ... P4SMA550CA SMD Transient Voltage Suppressor Diodes SMD Spannungs-Begrenzer-Dioden PPPM = 400W PM(AV) = 1.0 W Tjmax = 150°C VWM = 175 ... 495 V VBR = 220 ... 550 V Version 2016-05-31 ~ SMA / ~ DO-214AC 5± 0.2 Typical Applications Over-voltage protection ESD protection Free-wheeling diodes Commercial grade 1) Typische Anwendungen Schutz gegen Überspannung ESD-Schutz Freilauf-Dioden Standardausführung 1) 2.1± 0.2 2.2± 0.2 1± 0.3 Type Typ 0.15 1.5±0.1 4.5± 0.3 Features Besonderheiten Uni- and Bidirectional versions Uni- und Bidirektionale Versionen Peak pulse power of 400 W 400 W Impuls-Verlustleistung (10/1000 µs waveform) (10/1000 µs St.

P4SMA400A : Production specification TRANSIENT VOLTAGE SUPPRESSOR FEATURES z Plastic package has Underwriters Laboratory Flammability Classification 94V-0 z Glass passivated junction z 400 Wsurge capability at10×1000us waveform, Duty cycle:0.01% z Excellent clamping capability z Low zener impedance z Fast response time:Typically less then 1.0ps from 0 volts to BV min. z Typical IR less then 1 μΑ above 10V z High temperature soldering guaranteed:250℃/10 seconds at terminals. MECHANICAL DATA z Case: Molded plastic z Epoxy: UL94V-0 rate flame retardant z Lead: MIL-STD- 202E, Method 208 guaranteed z Polarity: olor band denotes cathode end z Packaging:12mm tape per EIA STD RS-481 z Mounting position: Any P.

P4SMA400A : The P4SMA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ■ 400W peak pulse power ■ 260oC/40sec change to capability at 10/1000µs 260oC/30sec waveform, repetition rate (duty cycles):0.01% ■ VBR @ TJ= VBR@25°C x (1+αT x (TJ - 25))(αT:Temperature ■ Excellent clamping capability Coefficient, typical value is ■ Typical IR less than 1μA when 0.1%) VBR min12V ■ Surface mount footprint for compact PCB layout ■ Low profile package ■ UL Recognized epoxy meeting flammability classification V-0 change to Plastic package is flammability rated V-0 per UL-94. ■ Typical failure.

P4SMA400A : The P4SMA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. FEATURES • For surface mounted applications in order to optimize board space. • Low profile package. • Built-in strain relief. • Glass passivated junction. • Excellent clamping capability. SMA/DO-214AC • Repetition Rate (duty cycle):0.01%. • Fast response time: typically less than 1.0ps from 0 Volts to VBR for unidirectional types. • Typical IR less than 1μA above 10V. • High Temperature soldering: 260°C/10 seconds at terminals. • Plastic package has Underwriters Laboratory Flammability 94V-O. MECHANICAL DATE • Case: JEDEC DO214A.

P4SMA400A : Features * For surface mounted application * Low profile package * Glass passivated junction * Excellent clamping capability * Fast response time: typically less than 1.0ps from 0 volts to BV min * Typical IR less than 1μA above 10V * High temperature soldering: 260℃/10 seconds at terminals * Plastic material used carries underwriters laboratory flammability classifications 94V-0 P4SMA6.8A THRU P4SMA550A Surface Mount Transient Voltage Suppressors Diodes Package Outline Dimensions in inches (millimeters) SMA: Mechanical Data * Case: Molded plastic * Terminals: Matte tin plated leads, solderable per JESD22-B102 * Polarity: Indicated by cathode band * Standard Packaging: 12mm tape per EIA S.

P4SMA400A : P4SMA6.8A(CA) - P4SMA440A(CA) SURFACE MOUNT TRANSIENT VOLAGE SUPPESSOR DIODE VOLTAGE RANGE: 6.8 - 440 V POWER: 400Wa t t s Features ! Glass Passivated Die Construction ! Uni- and Bi-Directional Versions Available ! Excellent Clamping Capability ! Fast Response Time ! Plastic Material: UL Flammability Classification Rating 94V-0 Mechanical Data ! Case: SMA, Transfer Molded Epoxy ! Terminals: Solderable per MIL-STD-202, Method 208 ! Polarity Indicator: Cathode Band (Note: Bi-directional devices have no polarity indicator.) ! Marking: Date Code and Marking Code See Page 2 ! Weight: 0.064 grams (approx.) B A J H G E SMA(DO-214AC) Dim Min Max C A 2.29 2.92 B 4.00 4.60 C 1.27 1.63 D D 0.15 0..

P4SMA400A : SMD Transient Voltage Suppressor Chip Integration Technology Corporation P4SMA Series 400W Surface Mount Transient Voltage Suppressors VOLTAGE : 6.8 TO 550Volts Features • 400W peak pulse power capability with a 10/1000uS waveform, repetition rate (duty cycle): 0.01%. • Excellent clamping capability. • Low incremental surge resistance. • Suffix "G" indicates Halogen-free part, ex.P4SMA6.8(C)AG. • Glass passivated chip junction • Lead-free parts meet environmental standards of MIL-STD-19500 /228 Mechanical data • Epoxy:UL94-V0 rated flame retardant • Case : Molded plastic, DO-214AC / SMA • Terminals : Solder plated, solderable per MIL-STD-750, Method 2026 • Polarity : Indicated by cathode .

P4SMA400A : E-DA SEMICONDUCTOR RoHS Compliant Product P4SMA6.8-P4SMA550A TRANSIENT VOLTAGE SUPPRESSOR BREAK DOWN VOLTAGE 6.8 to 550 Volt POWER 400 Watt 0.062(1.60) 0.047(1.20) 0.114(2.90) 0.098(2.50) 0.181(4.60) 0.157(4.00) FEATURES   Green • For surface mounted applications in order to optimize board space • Glass passivated junction • Low inductance • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • High temperature soldering : 260°C /10 seconds at terminals 0.012(0.305) 0.006(0.152) 0.060(1.52) 0.030(0.76) 0.008(0.203) 0.002(0.051) 0.208(5.28) 0.188(4.80) MECHANICAL DATA • Case: JEDEC DO-214AC,Molded plastic over passivated junction. • Terminals: Solder plat.




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)