DatasheetsPDF.com

6N136


Part Number 6N136
Manufacturer Everlight
Title 8 PIN DIP HIGH SPEED 1Mbit/s TRANSISTOR PHOTOCOUPLER
Description The 6N135, 6N136, EL4502 and EL4503 devices each consist of an infrared emitting diode, optically coupled to a high speed photo detector transisto...
Features
• High speed 1Mbit/s
• High isolation voltage between input and output (Viso=5000 Vrms )
• Guaranteed performance from 0°C to 70°C
• Wide operating temperature range of -55°C to 100°C
• Pb free and RoHS compliant
• UL and cUL approved(No. E214129)
• VDE approved (No. 132249)
• SEMKO approved
• NEMKO...

File Size 1.74MB
Datasheet 6N136 PDF File








Similar Ai Datasheet

6N134 : These units are single, dual and quad channel, hermetically sealed optocouplers. The products are capable of operation and storage over the full military temperature range and can be purchased as either standard product or with full MIL-PRF-38534 Class Level H or K testing or from the appropriate DSCC Drawing. All devices are manufactured and tested on a MIL-PRF-38534 certified line and are included in the DSCC Qualified Manufacturers List QML38534 for Hybrid Microcircuits. Quad channel devices are available by special order in the 16 pin DIP through hole packages. Functional Diagram Multiple Channel Devices Available VCC VE VOUT Applications • Military and Space • High Reliability System.

6N135 : The 6N135, 6N136, EL4502 and EL4503 devices each consist of an infrared emitting diode, optically coupled to a high speed photo detector transistor. A separate connection for the photodiode bias and output-transistor collector increase the speed by several orders of magnitude over conventional phototransistor couplers by reducing the base-collector capacitance of the input transistor. The devices are packaged in an 8-pin DIP package and available in wide-lead spacing and SMD option Applications • Line receivers • Telecommunication equipments • Power transistor isolation in motor drives • Replacement for low speed phototransistor photo couplers • Feedback loop in switch-mode power supplies • .

6N135 : These diode-transistor optocouplers use an insulating layer between a LED and an integrated photodetector to provide electrical insulation between input and output. Separate connections for the photodiode bias and output-transistor collector increase the speed up to a hundred times that of a conventional phototransistor coupler by reducing the base-collector capacitance. These single channel optocoup-lers are available in 8-pin DIP, SO-8, and Widebody package configurations. The 6N135, HCPL-0500, and HCNW135 are for use in TTL/CMOS, TTL/LSTTL or wide-bandwidth analog applications. Current transfer ratio (CTR) for these devices is 7% minimum at IF = 16 mA. The 6N136, HCPL-2502, HCPL-0501, and.

6N135 : The 6N135/6 consists of a high efficient AlGaAs Light Emitting Diode and a high speed optical detector. This design provides excellent AC and DC isolation between the input and output sides of the Optocoupler. Connection for the bias of the photodiode improves the speed that of a conventional phototransistor coupler by reducing the base-collector capacitances. The internal shield ensures high common mode transient immunity. A guaranteed common mode transient immunity is up to 1KV/μsec. Functional Diagram Features • High speed – 1MBd typical • Available in Dual-in-line, Wide lead spacing, Surface mounting package. • Storable output. • UL, CSA approval NC ANODE Vcc VB Cathode NC Vo GND 6.

6N135 : The 6N135 and 6N136 are optocouplers with a GaAIAs infrared emitting diode, optically coupled with an integrated photo detector which consists of a photo diode and a high speed transistor in a DIP-8 plastic package. Signals can be transmitted between two electrically separated circuits up to frequencies of 2 MHz. The potential difference between the circuits to be coupled should not exceed the maximum permissible reference voltages. FEATURES • Isolation test voltages: 5300 VRMS • TTL compatible • High bit rates: 1 Mbit/s • High common-mode interference immunity • Bandwidth 2 MHz • Open-collector output • External base wiring possible • Material categorization: for definitions of compliance p.

6N135 : TOSHIBA Photocoupler IRED & Photo IC 6N135, 6N136 Digital Logic Isolation Line Receiver Power Supply Control Switching Power Supply Transistor Inverter 6N135,6N136 Unit: mm The TOSHIBA 6N135 and 6N136 consists of an infrared emitting diode and a one chip photo diode−transistor. Each unit is 8−lead DIP package. • Isolation voltage: 2500 Vrms (min) • High speed: tpHL, tpLH = 0.5 μs (typ.) (RL = 1.9kΩ) • TTL compatible • If base pin is open, output signal will be noisy by environmental condition. For this base, TLP550 is suitable • UL-recognized: UL 1577, File No.E67349 • CQC-approved(6N136): GB4943.1,GB8898 Japan and Factory TOSHIBA 11−10C4S Weight: 0.54 g (typ.) Pin Configurations 18 .

6N135 : The HCPL-4502/HCPL-2503, 6N135/6 and HCPL-2530/HCPL-2531 optocouplers consist of an AlGaAs LED optically coupled to a high speed photodetector transistor. A separate connection for the bias of the photodiode improves the speed by several orders of magnitude over conventional phototransistor optocouplers by reducing the base-collector capacitance of the input transistor. An internal noise shield provides superior common mode rejection of 10kV/µs. An improved package allows superior insulation permitting a 480 V working voltage compared to industry standard 0f 220 V. 8 1 DUAL-CHANNEL HCPL-2530 HCPL-2531 FEATURES • High speed-1 MBit/s • Superior CMR-10 kV/µs • Dual-Channel HCPL-2530/HCPL-2531.

6N135 : 6N135/6N136 6N135/6N136 s Features 1. High speed response t PHL , t PLH ( 6N135 : MAX. 1.5 µ s at R L = 4.1k Ω ) ( 6N136 : MAX. 0.8 µ s at R L = 1.9k Ω ) 2. High common mode rejection voltage ( CM H : TYP. 1kV/ µ s ) 3. Standard dual-in-line package 4. Recognized by UL, file No. E64380 General Purpose Type Photocoupler s Outline Dimensions 0.85 ± 0.3 8 7 6N 6 Model 1.2 ± 0.3 No. 5 6.5 ± 0.5 ( Unit : mm ) Internal connection diagram 8 7 6 5 1 2 3 4 0.8 1 2 3 4 s Applications 1. Computers, measuring instruments, control equipment 2. High speed line receivers, high speed logic 3. Telephone sets 4. Signal transmission between circuits of different potentials and impedances 0.5TYP 3.

6N135 : The 6N135 and 6N136 are optocouplers with a GaAIAs infrared emitting diode, optically coupled with an integrated photodetector which consists of a photodiode and a high-speed transistor in a DIP8 plastic package. Signals can be transmitted between two electrically separated circuits up to frequencies of 2 MHz. The potential difference between the circuits to be coupled is not allowed to exceed the maximum permissible reference voltages. Maximum Ratings Emitter Reverse Voltage .5 V Forward Current ..25 mA Peak Forward Current (t =1 ms, duty cycle 50%) ....50 mA Maximum Surge Forwa.

6N135 : The HCPL4502, HCPL2503, 6N135, 6N136, HCPL2530 and HCPL2531 optocouplers consist of an AlGaAs LED optically coupled to a high speed photodetector transistor. A separate connection for the bias of the photodiode improves the speed by several orders of magnitude over conventional phototransistor optocouplers by reducing the base-collector capacitance of the input transistor. An internal.

6N135 : Single Channel, High Speed Optocouplers Technical Data H 6N135/6 HCNW135/6 HCNW4502/3 HCPL-0452/3 HCPL-0500/1 HCPL-4502/3 Features • 15 kV/µs Minimum Common Mode Transient Immunity at VCM = 1500 V (4503/0453) • High Speed: 1 Mb/s • TTL Compatible • Available in 8-Pin DIP, SO-8, Widebody Packages • Open Collector Output • Guaranteed Performance from Temperature: 0°C to 70°C • Safety Approval UL Recognized – 2500 V rms for 1 minute (5000 V rms for 1 minute for HCNW and Option 020 devices) per UL1577 CSA Approved VDE 0884 Approved –VIORM = 630 V peak for HCPL-4503#060 –VIORM = 1414 V peak for HCNW devices BSI Certified (HCNW devices only) • Dual Channel Version Available (253X/4534/053X/ 0534.

6N135 : The 6N135, 6N136, ICPL4502 and ICPL4503 devices each consists of an infrared emitting diode, optically coupled to a high speed photo detector transistor. A separate connection for the photodiode bias and output-transistor collector increases the speed by several orders of magnitude over conventional phototransistor couplers by reducing the base-collector capacitance of the input transistor. FEATURES • High speed 1Mbit/s • High AC Isolation Voltage 5000Vrms • Guaranteed performance from 0°C to 70°C • Wide Operating temperature range -55°C to 100°C • Pb Free and RoHS Compliant • UL File E91231 • VDE Approval Certificate No. 40044376 for 6N135 and 6N136, with suffix “V” APPLICATIONS • Line Rece.

6N135 : The 6N135, 6N136, CT4502 and CT4503 devices each consist of an infrared emitting diode, optically coupled to a high speed photo detector transistor. A separate connection for the photodiode bias and output-transistor collector increase the speed by several orders of magnitude over conventional phototransistor couplers by reducing the base-collector capacitance of the input transistor. The devices are packaged in an 8-pin DIP package and also available in gullwing (400mil) and surface mount lead forming. Schematic Note: Different bending options available. See package dimension. CT Micro Proprietary & Confidential Page 1 Rev 3 Jan, 2018 6N135, 6N136, CT4502, CT4503 1Mbit/s High Speed Phot.

6N135 : These diode-transistor optoc­oup­lers use an insulating layer between a LED and an integrated photodetector to provide elec­trical ins­u­lation between input and out­put. Separate connections for the photodiode bias and output-transistor collector increase the speed up to a hundred times that of a conven­tional phototransistor coupler by reduci­ng the base-collector capacitance. These single channel optocoupl­ers are available in 8-Pin DIP­, SO-8 and Widebody package configurations. The 6N135, HCPL-0500, and HCNW135 are for use in TTL/ CMOS, TTL/LSTTL or wide bandwidth analog applications. Current transfer ratio (CTR) for these devices is 7% minimum at IF = 16 mA. The 6N136, HCPL-2502, HCP.

6N135-L : The 6N135/ 6N136-L consists of a high efficient AlGaAs Light Emitting Diode and a high speed optical detector. This design provides excellent AC and DC isolation between the input and output sides of the Optocoupler. Connection for the bias of the photodiode improves the speed that of a conventional phototransistor coupler by reducing the base-collector capacitances. The internal shield ensures high common mode transient immunity. A guaranteed common mode transient immunity is up to 1KV/μsec. 1.1 Features  High speed – 1MBd typical  Available in Dual-in-line, Wide lead spacing, Surface mounting package.  Storable output.  UL, CSA approval 1.2 Applications  Isolation in line receivers  .

6N135M : The 6N135M, 6N136M, HCPL4503M, HCPL2530M, and HCPL2531M optocouplers consist of an AlGaAs LED optically coupled to a high speed photodetector transistor for each channel. A separate connection for the bias of the photodiode improves the speed by several orders of magnitude over conventional phototransistor optocouplers by reducing the base-collector capacitance of the input transistor. The HCPL4503M has no internal connection to the phototransistor base for improved noise immunity. An internal noise shield provides superior common mode rejection of up to 50,000 V/μs. Related Resources • www.fairchildsemi.com/products/optoelectronics/ • www.fairchildsemi.com/pf/HC/HCPL0500.html • www.fairchil.

6N136 : These diode-transistor optocouplers use an insulating layer between a LED and an integrated photodetector to provide electrical insulation between input and output. Separate connections for the photodiode bias and output-transistor collector increase the speed up to a hundred times that of a conventional phototransistor coupler by reducing the base-collector capacitance. These single channel optocoup-lers are available in 8-pin DIP, SO-8, and Widebody package configurations. The 6N135, HCPL-0500, and HCNW135 are for use in TTL/CMOS, TTL/LSTTL or wide-bandwidth analog applications. Current transfer ratio (CTR) for these devices is 7% minimum at IF = 16 mA. The 6N136, HCPL-2502, HCPL-0501, and.




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)