DatasheetsPDF.com

P4KE7.5


Part Number P4KE7.5
Manufacturer Rectron
Title GPP TRANSIENT VOLTAGE SUPPRESSOR
Description GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATT STEADY STATE FEATURES * Plastic package has underwriters laboratory * Glass passivat...
Features * Plastic package has underwriters laboratory * Glass passivated chip construction * 400 watt surage capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time TVS P4KE SERIES DO-41 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 oC ambient temperatur...

File Size 101.78KB
Datasheet P4KE7.5 PDF File








Similar Ai Datasheet

P4KE7.5 : APPEARANCE This 400 W Transient Voltage Suppressor (TVS) series is an economical molded axial-leaded package to protect voltage-sensitive components from destructive or partial degradation. They are available in both unidirectional or bi-directional configurations as well as RoHS Compliant (annealed matte-Tin finish) with an e3 suffix added to the part number. They have a peak pulse power rating of 400 watts for a 10/1000 µs as depicted in Figures 1 and 2. The nominal breakdown voltages (VBR) in this series extend from 6.8 to 400 volts. Microsemi also offers a broad spectrum of additional TVSs to meet your needs. IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.

P4KE7.5 : Page HITANO ENTERPRISE CORP. 7F-7, No. 3, Wu Chuan 1st Road, New Taipei Industrial Park, New Taipei City, TAIWAN, R.O.C. Tel: +886 2 2299 1331 (Rep.) Fax: +886 2 2298 2466, 2298 2969 Prepared by 10-Feb.-2015 Andy Hsu Checked by 10-Feb.-2015 Hwa Wu Approved by 10-Feb.-2015 Hwa Wu Accepted by (customer) 400W TRANSIENT VOLTAGE SUPPRESSOR P4KE6.8(C)A THRU P4KE540(C)A FEATURES  PLASTIC PACKAGE HAS UNDERWRITERS LABORATORY. FLAMMABILITY CLASSIFICATION 94V-0.  400W SURGE CAPABILITY AT 1ms.  EXCELLENT CLAMPING CAPABILITY.  LOW ZENER IMPEDANCE.  FAST RESPONSE TIME:TYPICALLY LESS THAN 1.0 PS FROM 0 VOLTS TO BV MIN.  TYPICAL IR LESS THAN 1A ABOVE 10V.  HIGH TEMPERATURE SOLDERING GUARANT.

P4KE7.5 : ® WON-TOP ELECTRONICS Features  Glass Passivated Die Construction  400W Peak Pulse Power Dissipation  5.5V – 513V Standoff Voltage  Uni- and Bi-Directional Versions Available  Excellent Clamping Voltage  Typical Response Time 1nS  Plastic Case Material has UL Flammability Classification Rating 94V-0 Mechanical Data  Case: DO-41, Molded Plastic  Terminals: Plated Leads Solderable per MIL-STD-202, Method 208  Polarity: Cathode Band Except Bi-Directional  Weight: 0.35 grams (approx.)  Mounting Position: Any  Marking: Type Number  Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Part Number, See Page 6 P4KE SERIES 400W TRANSIENT VOLTAGE SUPPRESSOR Pb AB A D DO-41 .

P4KE7.5 : LITE-ON SEMICONDUCTOR GLASS PASSIVATED UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS P4KE SERIES REVERSE VOLTAGE - 6.8 to 440 Volts POWER DISSIPATION - 400 WATTS FEATURES Glass passivated chip Low leakage Uni and Bidirectional unit Excellent clamping capability The plastic material has U/L recognition 94V-O Fast response time MECHANICAL DATA Case : Molded Plastic Marking : Unidirectional - type number and cathode band Bidirectional - type number only Weight : 0.34 grams DO-41 A BA C D DO-41 Dim. Min. Max. A 25.4 B 4.10 5.20 C 0.71 0.86 D 2.00 2.70 All Dimensions in millimeter MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwi.

P4KE7.5 : P4KE6.8-P4KE400A High-reliability discrete products and engineering services since 1977 TRANISENT VOLTAGE SUPPRESSOR FEATURES  Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number.  Available as non-RoHS (Sn/Pb plating), standard, and as RoHS by adding “-PBF” suffix.  For Bidirectional construction, indicate a C or CA suffix after part number, i.e. P4KE170CA. MAXIMUM RATINGS Peak Pulse Power Dissipation @ 25°C: Steady State Power: Forward Voltage @ 25°C: Operating and Storage Temperature: 400 Watts 2.5 Watts @ TL = 25°C at 3/8” (10mm) from body, or 1.13 Watt at TA = 25°C on FR4 PC board described for thermal resistance 3.5 .

P4KE7.5 : P4KE**** Series GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE - 6.8 TO 550 Volts 400Watt Peak Power 1.0 Watt Steady State Feature * Plastic package has Underwriters Laboratory Flammability Classification 94V-O * Glass passivated chip junction in DO-41 package * 400W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time: typically less than 1.0 ps from 0 volts to BV min * Typical IR less than 1μA above 10V * High temperature soldering guaranteed: 260 /10 seconds/.375”,(9.5mm) lead length/5lbs., (2.3kg) tension Mechanical Data Case: JEDEC DO-41 molded plastic Terminals: Axial leads, solderable per MIL-STD-202, Meth.

P4KE7.5 : The P4KE series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features u Glass passivated chip junction in DO-41 Package u Low leakage u Uni and Bidirectional unit u Excellent clamping capability u 400W Peak power capability at 10 × 1000µs waveform Repetition rate (duty cycle):0.01% u Fast response time: typically less than 1.0ps from 0 Volts to VBR min u Typical IR less than 5μA above 12V. u High Temperature soldering: 260°C/40 seconds at terminals u Typical maximum temperature coefficient ΔVBR = 0.1% × VBR@25°C× ΔT u Plastic package has Underwriters Laboratory Flammability 94V-0 u Matte ti.

P4KE7.5 : P4KE6.8 ... P4KE440CA +0.562.5 -4.5 Type 6.3±0.1 ELV P4KE6.8 ... P4KE440CA Transient Voltage Suppressor Diodes Spannungs-Begrenzer-Dioden Version 2016-11-23 DO-15 / DO-204AC Typical Applications Over-voltage protection ESD protection Free-wheeling diodes Commercial grade 1) Ø 3±0.05 Features Uni- and Bidirectional versions Peak pulse power of 400 W (10/1000 µs waveform) Very fast response time Compliant to RoHS, REACH, Conflict Minerals 1) Ø 0.8±0.05 Mechanical Data 1) Taped in ammo pack Weight approx. Case material Dimensions - Maße [mm] Solder & assembly conditions PPPM = 400W PM(AV) = 1.0 W Tjmax = 175°C VWM = 5.0 ... 376 V VBR = 6.8 ... 440 V WEEE RoHS Pb 4000 0.4 g UL 9.

P4KE7.5 : P4KE VBR : 6.8 - 550 Volts PPK : 400 Watts Features • 400W surge capability at 1ms • Excellent clamping capability • Low zener impedance • Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) • Typical IR less then 1μA above 10V • RoHS compliant package Applications • For Bi-directional use C or CA Suffix • Electrical characteristics apply in both directions Mechanical Data • Case : DO-41 Molded plastic • Epoxy : UL94V-0 rate flame retardant • Lead : Axial lead solderable per MIL-STD-202, method 208 guaranteed • Polarity : Color band denotes cathode end • Mounting position : Any • Weight : 0.33 gram Packing & Order Information 5,000/T Graphic symbol MAXIMUM RATINGS AND .

P4KE7.5 : DC COMPONENTS CO., LTD. R RECTIFIER SPECIALISTS P4KE6.8 THRU P4KE440CA TECHNICAL SPECIFICATIONS OF TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE RANGE - 6.8 to 440 Volts PEAK PULSE POWER - 400 Watts FEATURES * Glass passivated junction * 400 Watts Peak Pulse Power capability on 10/1000 µs waveform * Excellent clamping capability * Low zener impedance * Fast response time DO-41 MECHANICAL DATA * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant * Lead: MIL-STD-202E, Method 208 guaranteed * Polarity: Color band denotes positive end (cathode) except bidirectional types * Mounting position: Any * Weight: 0.3 gram 1.0 (25.4) MIN. .034 (0.9) .028 (0.7) DIA. .205 (5.2) .166 (4.2) 1.0 (25.4.

P4KE7.5 : P4KE SERIES VBR : 6.8 - 550 Volts PPK : 400 Watts TRANSIENT VOLTAGE SUPPRESSOR DO - 41 FEATURES : * 400W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) * Typical IR less then 1µA above 10V * Pb / RoHS Free MECHANICAL DATA * Case : DO-41 Molded plastic * Epoxy : UL94V-O rate flame retardant * Lead : Axial lead solderable per MIL-STD-202, method 208 guaranteed * Polarity : Color band denotes cathode end except Bipolar. * Mounting position : Any * Weight : 0.339 gram 0.107 (2.74) 0.080 (2.03) 0.034 (0.86) 0.028 (0.71) 1.00 (25.4) MIN. 0.205 (5.20) 0.160 (4.10) 1.00 (25.4) MIN. Dimensio.

P4KE7.5 : SHANGHAI SEMITECH SEMICONDUCTOR CO., LTD P4KE6.8—P4KE440CA GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR Features  Glass Passivated Die Construction  400W Peak Pulse Power Dissipation  Uni-directional Versions Available  Excellent Clamping Capability  Fast Response Time 1 ns DO-41 Applications  Communication Systems  Power Supplies  Medical Equipment  Business Machines REF. A B C D DIMENSIONS Millimeters Inches Min. Max. Min. Max. 25.4 --- 1.000 --- 4.20 5.20 0.165 0.205 0.65 0.90 0.026 0.034 2.00 2.85 0.080 0.112 Absolute Maximum Ratings Parameter Peak Pulse Power Dissipation on 10/1000 us Waveform (Note 1, 2, FIG.1) Peak Pulse Current of on 10/100.

P4KE7.5-G : 400W Transient Voltage Suppressor P4KE-G Series Stand-off Voltage: 6.8 ~ 600V Power Dissipation: 400 Watts RoHS Device Features -Glass passivated chip -Low leakage -Uni and Bidirection unit -Excellent clamping capability -The plastic material has UL recognition 94V-0 -Fast response time: typically less than 1.0pS from 0 volts to BV min Mechanical Data -Case: Molded plastic DO-41 -Polarity: By cathode band denotes unidirectional device none cathode band denoted bi-directional device -Weight: 0.34 grams DO-41 1.000(25.40) MIN. 0.033(0.84) 0.028(0.71) DIA. 0.205(5.21) 0.165(4.19) 1.000(25.40) MIN. 0.117(2.97) 0.090(2.29) DIA. Dimensions in inches and (millimeter) Maximum Ratings and El.

P4KE7.5-LF : E L E C T R O N I C P4KE6.8(C)-LF THRU P4KE540(C)A-LF 400W TRANSIENT VOLTAGE SUPPRESSOR FEATURES z PLASTIC PACKAGE HAS UNDERWRITERS LABORATORY FLAMMABILITY CLASSIFICATION 94V-0 z 400W SURGE CAPABILITY AT 1ms z EXCELLENT CLAMPING CAPABILITY z LOW ZENER IMPEDANCE z FAST RESPONSE TIME:TYPICALLY LESS THAN 1.0 PS FROM 0 VOLTS TO BV MIN z TYPICAL IR LESS THAN 1μA ABOVE 10V z HIGH TEMPERATURE SOLDERING GUARANTEED:260℃/10S /.375〞(9.5mm) LEAD LENGTH/5LBS., (2.3KG) TENSION z LEAD FREE 1.0(25.4) MIN .034(0.9) .028(0.7) .205(5.2) .166(4.2) .107(2.7) .080(2.0) 1.0(25.4) MIN MECHANICAL DATA z CASE:MOLDED PLASTIC z TERMINALS︰AXIAL LEADS, SOLDERABLE PER MIL-STD-202, METHOD 208 z POLARITY:COLOR BAND DE.

P4KE7.5A : APPEARANCE This 400 W Transient Voltage Suppressor (TVS) series is an economical molded axial-leaded package to protect voltage-sensitive components from destructive or partial degradation. They are available in both unidirectional or bi-directional configurations as well as RoHS Compliant (annealed matte-Tin finish) with an e3 suffix added to the part number. They have a peak pulse power rating of 400 watts for a 10/1000 µs as depicted in Figures 1 and 2. The nominal breakdown voltages (VBR) in this series extend from 6.8 to 400 volts. Microsemi also offers a broad spectrum of additional TVSs to meet your needs. IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.

P4KE7.5A : Page HITANO ENTERPRISE CORP. 7F-7, No. 3, Wu Chuan 1st Road, New Taipei Industrial Park, New Taipei City, TAIWAN, R.O.C. Tel: +886 2 2299 1331 (Rep.) Fax: +886 2 2298 2466, 2298 2969 Prepared by 10-Feb.-2015 Andy Hsu Checked by 10-Feb.-2015 Hwa Wu Approved by 10-Feb.-2015 Hwa Wu Accepted by (customer) 400W TRANSIENT VOLTAGE SUPPRESSOR P4KE6.8(C)A THRU P4KE540(C)A FEATURES  PLASTIC PACKAGE HAS UNDERWRITERS LABORATORY. FLAMMABILITY CLASSIFICATION 94V-0.  400W SURGE CAPABILITY AT 1ms.  EXCELLENT CLAMPING CAPABILITY.  LOW ZENER IMPEDANCE.  FAST RESPONSE TIME:TYPICALLY LESS THAN 1.0 PS FROM 0 VOLTS TO BV MIN.  TYPICAL IR LESS THAN 1A ABOVE 10V.  HIGH TEMPERATURE SOLDERING GUARANT.




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)