DatasheetsPDF.com

LM7171 Datasheet PDF


Part Number LM7171
Manufacturer Texas Instruments
Title Voltage Feedback Amplifier
Description The LM7171 is a high-speed voltage-feedback amplifier that has the slewing characteristic of a current-feedback amplifier, but can be used in all...
Features
• Typical values unless otherwise noted
• Easy-to-use voltage-feedback topology
• Very high slew rate: 4100V/μs
• Wide unity-gain bandwidth: 200MHz
• −3dB frequency at AV = +2: 220MHz
• Low supply current: 6.5mA
• High open-loop gain: 85dB
• High output current: 100mA
• Differential gain and phase: ...

File Size 1.82MB
Datasheet LM7171 PDF File








Similar Ai Datasheet

LM70 : The LM70 is a temperature sensor, Delta-Sigma analog-to-digital converter with an SPI and MICROWIRE compatible interface available in LLP and MSOP 8-pin packages. The host can query the LM70 at any time to read temperature. A shutdown mode decreases power consumption to less than 10 µA. This mode is useful in systems where low average power consumption is critical. The LM70 has 10-bit plus sign temperature resolution (0.25˚C per LSB) while operating over a temperature range of −55˚C to +150˚C. The LM70’s 2.65V to 5.5V supply voltage range, low supply current and simple SPI interface make it ideal for a wide range of applications. These include thermal management and protection applications i.

LM70 : The LM70 is a temperature sensor, Delta-Sigma analog-to-digital converter with an SPI and MICROWIRE compatible interface available in WSON and VSSOP 8-pin packages. The host can query the LM70 at any time to read temperature. A shutdown mode decreases power consumption to less than 10 µA. This mode is useful in systems where low average power consumption is critical. The LM70 has 10-bit plus sign temperature resolution (0.25°C per LSB) while operating over a temperature range of −55°C to +150°C. The LM70's 2.65V to 5.5V supply voltage range, low supply current and simple SPI interface make it ideal for a wide range of applications. These include thermal management and protection applications.

LM7000 : .

LM7000N : .

LM7001 : Ordering number : EN 3591A NMOS LSI LM7001/7001M Direct PLL Frequency Synthesizers .

LM7001J : No. 5262-4/8 LM7001J, 7001JM Data Input Timing VIH = 2.2 to 6.5 V, VIL = 0 to 0.7 V, Xtal = 5.00 to 7.20 (typ) to 8.00 MHz Data acquisition: On the CL rising edge Note: Data transfers must be started only after the crystal oscillator is operating normally, i.e., after a proper input signal has been supplied to XIN. Parameter Enable setup time Enable hold time Data setup time Data hold time Clock low-level time Clock high-level time Rise time Fall time Symbol tES tEH tSU tHD tLO tHI tR tF Xtal: 7.20 MHz At least 1.5 µs At least 1.5 µs At least 1.5 µs At least 1.5 µs At least 1.5 µs At least 1.5 µs Up to 1 µs Up to 1 µs Xtal: for frequencies other than 7.2 MHz At least [ At least [ At le.

LM7001JM : No. 5262-4/8 LM7001J, 7001JM Data Input Timing VIH = 2.2 to 6.5 V, VIL = 0 to 0.7 V, Xtal = 5.00 to 7.20 (typ) to 8.00 MHz Data acquisition: On the CL rising edge Note: Data transfers must be started only after the crystal oscillator is operating normally, i.e., after a proper input signal has been supplied to XIN. Parameter Enable setup time Enable hold time Data setup time Data hold time Clock low-level time Clock high-level time Rise time Fall time Symbol tES tEH tSU tHD tLO tHI tR tF Xtal: 7.20 MHz At least 1.5 µs At least 1.5 µs At least 1.5 µs At least 1.5 µs At least 1.5 µs At least 1.5 µs Up to 1 µs Up to 1 µs Xtal: for frequencies other than 7.2 MHz At least [ At least [ At le.

LM7001M : Ordering number : EN 3591A NMOS LSI LM7001/7001M Direct PLL Frequency Synthesizers .

LM7005 : .

LM7006 : .

LM7006H : .

LM7007HM : .

LM7007M : .

LM7008HM : .

LM7008M : .

LM709 : The LM709 series is a monolithic operational amplifier intended for general-purpose applications Operation is completely specified over the range of voltages commonly used for these devices The design in addition to providing high gain minimizes both offset voltage and bias currents Further the class-B output stage gives a large output capability with minimum power drain External components are used to frequency compensate the amplifier Although the unity-gain compensation network specified will make the amplifier unconditionally stable in all feedback configurations compensation can be tailored to optimize high-frequency performance for any gain setting The LM709C is the commercial-industri.

LM71 : The LM71 is a low-power, high-resolution digital temperature sensor with an SPI and MICROWIRE compatible interface, available in the 5-pin SOT23 or the 6-pin LLP (no pull back) package. The host can query the LM71 at any time to read temperature. Its low operating current is useful in systems where low power consumption is critical. The LM71 has 13-bit plus sign temperature resolution (0.03125˚C per LSB) while operating over a temperature range of −40˚C to +150˚C. The LM71’s 2.65V to 5.5V supply voltage range, fast conversion rate, low supply current, and simple SPI interface make it ideal for a wide range of applications. n Electronic Test Equipment n Vending Machines Features n SOT23-5 or.




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)