DatasheetsPDF.com

LM3687


Part Number LM3687
Manufacturer Texas Instruments
Title Step-Down DC-DC Converter
Description The LM3687 is a step-down DC-DC converter with an integrated low dropout Linear Regulator optimized for powering ultra-low voltage circuits from a...
Features 1 2DC-DC Converter:
• 750mA Maximum Load Capability
• 1.8MHz PWM Fixed Switching Frequency (Typ.)
• Automatic PFM/PWM Mode Switching
• 27µA typ. Quiescent Current
• Internal Synchronous Rectification for High Efficiency
• Internal Soft Start Dual Rail Linear Regulator:
• Startup Mode
• Load Transien...

File Size 1.79MB
Datasheet LM3687 PDF File








Similar Ai Datasheet

LM368 : This is a new series of hex sense amplifiers. The LM 165/ LM365 and LM166/LM366 have TRI·STATE outputs. The LM167/LM367 and LM168/LM363 have both TRI·STATE inputs and outputs. High impedance states are controlled by an enable input. The current threshold, at which the outputs change state is determined by the current at the programming pin. The current threshold is i OOIlA with the pro- gramming pin grounded and 350llA with the pin unconnected. It can be set from 100llA to 350llA by connecting a resistor from the pin to ground, and set ,above 350llA by connecting a resistor from the pin to the positive supply. The outputs are high current drivers capable of sinking 50 mA in the low state an.

LM368-10 : The LM368 is a precision monolithic temperature-compensated voltage reference The LM368 makes use of thin-film technology enhanced by the discrete laser trimming of resistors to achieve excellent Temperature coefficient (Tempco) of VOUT (as low as 5ppm C) along with tight initial tolerance (as low as 0 02%) The trim scheme is such that individual resistors are cut open rather than being trimmed (partially cut) to avoid resistor drift caused by electromigration in the trimmed area The LM368 also provides excellent stability vs changes in input voltage and output current (both sourcing and sinking) This device is available in output voltage options of 5 0V and 10 0V and will operate in both se.

LM368-2.5 : The LM368-2 5 is a precision monolithic temperature-compensated voltage reference The LM368-2 5 makes use of thin-film technology enhanced by the discrete laser trimming of resistors to achieve excellent Temperature coefficient (Tempco) of VOUT (as low as 11 ppm C) along with tight initial tolerance (as low as 0 02%) The trim scheme is such that individual resistors are cut open rather than being trimmed (partially cut) to avoid resistor drift caused by electromigration in the trimmed area The LM368-2 5 also provides excellent stability vs changes in input voltage and output current The output is short circuit proof A trim pin is made available for fine trimming of VOUT or for obtaining inte.

LM368-5.0 : The LM368 is a precision monolithic temperature-compensated voltage reference The LM368 makes use of thin-film technology enhanced by the discrete laser trimming of resistors to achieve excellent Temperature coefficient (Tempco) of VOUT (as low as 5ppm C) along with tight initial tolerance (as low as 0 02%) The trim scheme is such that individual resistors are cut open rather than being trimmed (partially cut) to avoid resistor drift caused by electromigration in the trimmed area The LM368 also provides excellent stability vs changes in input voltage and output current (both sourcing and sinking) This device is available in output voltage options of 5 0V and 10 0V and will operate in both se.

LM3686 : The LM3686 is a step-down DC-DC converter with a very low-dropout linear regulator and a low-noise linear regulator optimized for powering ultra-low voltage circuits. It provides three outputs with combined load current up to 900 mA over an input voltage range from 2.7 V to 5.5 V. The device offers superior features and performance for many applications. Automatic intelligent switching between PWM low-noise and PFM low-current mode offers improved system control. During full-power operation, a fixed-frequency 3 MHz (typical), PWM mode drives loads from approximately 70 mA to 600 mA maximum. Hysteretic PFM mode extends the battery life through reduction of the quiescent current to 28 μA (typi.

LM3686 : The LM3686 is a step-down DC-DC converter with one integrated very low dropout linear regulator and a low noise linear regulator optimized for powering ultra-low voltage circuits from a single Li-Ion cell or 3 cell NiMH/NiCd batteries. It provides three outputs with combined load current up to 900 mA over an input voltage range from 2.7V to 5.5V. The device offers superior features and performance for many applications. Automatic intelligent switching between PWM low-noise and PFM low-current mode offers improved system control. During full-power operation, a fixed-frequency 3 MHz (typ.), PWM mode drives loads from ~70 mA to 600 mA max. Hysteretic PFM mode extends the battery life through re.

LM3687 : The LM3687 is a step-down DC-DC converter with an integrated low dropout Linear Regulator optimized for powering ultra-low voltage circuits from a single Li-Ion cell or 3 cell NiMH/NiCd batteries. It provides a dual output with fixed output voltages and combined load current up to 750mA in post www.DataSheet4U.com regulation mode or 1100mA in independent mode of operation, over an input voltage range from 2.7V to 5.5V. There are several different fixed output voltage combinations available (refer to table 'Voltage Options'). The Linear Regulator being driven from the fixed output voltage of the buck converter (post regulation) translates to high efficiency. The device offers superior feature.




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)