DatasheetsPDF.com

7006S

Renesas
Part Number 7006S
Manufacturer Renesas
Description HIGH-SPEED 16K x 8 DUAL-PORT STATIC RAM
Published Dec 6, 2020
Detailed Description HIGH-SPEED 16K x 8 DUAL-PORT STATIC RAM 7006S/L Features ◆ True Dual-Ported memory cells which allow simultaneous read...
Datasheet PDF File 7006S PDF File

7006S
7006S

Overview
HIGH-SPEED 16K x 8 DUAL-PORT STATIC RAM 7006S/L Features ◆ True Dual-Ported memory cells which allow simultaneous reads of the same memory location ◆ High-speed access – Commercial: 15/17/20/25/35/55ns (max.
) – Industrial: 20ns (max.
) – Military: 20/25/35/55/70ns (max.
) ◆ Low-power operation – IDT7006S Active: 750mW (typ.
) Standby: 5mW (typ.
) – IDT7006L Active: 700mW (typ.
) Standby: 1mW (typ.
) ◆ IDT7006 easily expands data bus width to 16 bits or more using the Master/Slave select when cascading more than one device Functional Block Diagram OEL CEL R/WL ◆ M/S = H for BUSY output flag on Master, M/S = L for BUSY input on Slave ◆ Busy and Interrupt Flags ◆ On-chip port arbitration logic ◆ Full on-chip hardware support of semaphore signaling between ports ◆ Fully asynchronous operation from either port ◆ Devices are capable of withstanding greater than 2001V electrostatic discharge ◆ Battery backup operation—2V data retention ◆ TTL-compatible, single 5V (±10%) power supply ◆ Available in 68-pin PGA, quad flatpack, PLCC, and a 64-pin TQFP ◆ Industrial temperature range (–40°C to +85°C) is available for selected speeds ◆ Green parts available, see ordering information OER CER R/WR I/O0L- I/O7L BUSYL(1,2) A13L A0L I/O Control I/O Control Address Decoder 14 CEL OEL R/WL MEMORY ARRAY ARBITRATION INTERRUPT SEMAPHORE LOGIC Address Decoder 14 CER OER R/WR SEML INTL(2) M/S NOTES: 1.
(MASTER): BUSY is output; (SLAVE): BUSY is input.
2.
BUSY outputs and INT outputs are non-tri-stated push-pull.
1 Jan.
30.
20 I/O0R-I/O7R BUSYR(1,2) A13R A0R SEMR INTR(2) 2739 drw 01 7006S/L High-Speed 16K x 8 Dual-Port Static RAM Description The IDT7006 is a high-speed 16K x 8 Dual-Port Static RAM.
The IDT7006 is designed to be used as a stand-alone 128K-bit Dual-Port RAM or as a combination MASTER/SLAVE Dual-Port RAM for 16-bit-or-more word systems.
Using the IDT MASTER/SLAVE Dual-Port RAM approach in 16-bit or wider memory system applications results in full-speed, errorfree operatio...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)