DatasheetsPDF.com

CAB4A

Part Number	CAB4A
Manufacturer	Texas Instruments
Description	32-Bit 1:2 Command/Address/Control Buffer and 1:4 Differential Clock Buffer
Published	Oct 8, 2022
Detailed Description	CAB4A www.ti.com SNAS630B – JULY 2013 – REVISED OCTOBER 2013 CAB4A - DDR4 Register 32-Bit 1:2 Command/Address/Control...
Datasheet	CAB4A PDF File

Overview

CAB4A www.
ti.
com SNAS630B – JULY 2013 – REVISED OCTOBER 2013 CAB4A - DDR4 Register 32-Bit 1:2 Command/Address/Control Buffer and 1:4 Differential Clock Buffer Check for Samples: CAB4A FEATURES 1 •23 DDR4RCD01 JEDEC Compliant • DDR4 RDIMM and LRDIMM up to DDR4-2400 • 32 Bits 1-to-2 Register Outputs • 1-to-4 Differential Clock Buffer • 1.
2V Operation • PLL with Internal Feedback • Configurable Driver Strength • Scalable Weak Driver • Programmable Latency • Output Driver Calibration • Address Mirroring and Inversion • DDR4 Full-Parity Operation • On-Chip Programmable VREF Generation • CA Bus Training Mode • I2C™ Interface Support • Up to 16-Logical Ranks Support for 3DS RDIMMs and LRDIMMs • Up to 4 Physical Ranks Support for RDIMMs and LRDIMMs DESCRIPTION The CAB4 is 32-bit 1:2 Command/Address/Control Buffer and 1:4 differential Clock Buffer designed for operation on DDR4 registered DIMMs with a 1.
2 V VDD mode.
All inputs are pseudo-differential using external or internal voltage reference.
All outputs are full swing CMOS drivers optimized to drive 15 to 50 Ω effective terminated traces in DDR4 RDIMM, LRDIMM and 3DStacked DIMM applications.
The clock outputs, command/address outputs, control outputs, data buffer control outputs can be enabled in groups, and independently driven with different strengths to compensate for different DIMM net topologies.
The DDR4 Register operates from a differential clock (CK_t and CK_c).
Inputs are registered at the crossing of CK_t going HIGH, and CK_c going LOW.
The input signals could be either re-driven to the outputs if one of the input signals DCS[n:0]_n is driven LOW or it could be used to access device internal control registers when certain input conditions are met.
The device is characterized in the operating temperature range from -40°C to 95°C.
MEMORY MODULE DRAM CAB4A PLL Data Clock Command Address Clock Data CPU / DSP / Ethernet MCU MEMORY CONTROLLER (MCH) DDR4 ² Memory Subsystem Figure 1.
DDR4 - RDIMM Memory...

Similar Datasheet

CAB006M12GM3 Half-Bridge Module - Wolfspeed
CAB006M12GM3T Half-Bridge Module - Wolfspeed
CAB011A12GM3 Half-Bridge Module - Wolfspeed
CAB011A12GM3T Half-Bridge Module - Wolfspeed
CAB011M12FM3 All-Silicon Carbide Half-Bridge Module - Wolfspeed
CAB011M12FM3T All-Silicon Carbide Half-Bridge Module - Wolfspeed
CAB016M12FM3 Half-Bridge Module - Wolfspeed
CAB016M12FM3T Half-Bridge Module - Wolfspeed
CAB320M17XM3 Half-Bridge Module - Wolfspeed
CAB400M12XM3 Half-Bridge Module - Wolfspeed

@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)