DatasheetsPDF.com

MP8795

MPS
Part Number MP8795
Manufacturer MPS
Description 16V 15A Synchronous Step-Down Converter
Published Sep 17, 2023
Detailed Description MP8795 16V, 15A, Synchronous, Step-Down Converter with Adjustable Current Limit, Programmable Frequency DESCRIPTION The...
Datasheet PDF File MP8795 PDF File

MP8795
MP8795

Overview
MP8795 16V, 15A, Synchronous, Step-Down Converter with Adjustable Current Limit, Programmable Frequency DESCRIPTION The MP8795 is a fully integrated, highfrequency, synchronous, buck converter.
It offers a very compact solution that achieves up to 15A of output current with excellent load and line regulation over a wide input supply range.
The MP8795 operates at high efficiency over a wide output current load range.
The MP8795 adopts an internally compensated constant-on-time (COT) control mode that provides fast transient response and eases loop stabilization.
The operating frequency can be set to 600kHz, 800kHz, or 1000kHz easily with MODE configuration, allowing the MP8795 frequency to remain constant regardless of the input and output voltages.
The output voltage start-up ramp is controlled by an internal 1ms timer.
It can be increased by adding a capacitor on SS.
An open-drain power good (PGOOD) signal indicates if the output is within its nominal voltage range.
PGOOD is clamped at around 0.
7V with an external pull-up voltage when the input supply fails to power the MP8795.
Full protection features include over-current protection (OCP), over-voltage protection (OVP), under-voltage protection (UVP), and overtemperature protection (OTP).
The MP8795 requires a minimal number of readily available, standard, external components and is available in a QFN-21 (3mmx4mm) package.
FEATURES • Wide Input Voltage Range o 2.
7V to 16V with External 3.
3V VCC Bias o 4V to 16V with Internal Bias or External 3.
3V VCC Bias • Differential Output Voltage Remote Sense • Programmable Accurate Current Limit Level • 15A Output Current • Low RDS(ON) Integrated Power MOSFETs • Selectable Pulse Skip or Forced CCM Operation • Excellent Load Regulation • Output Voltage Discharge • PGOOD Active Clamped at Low Level during Power Failure • Programmable Soft-Start Time from 1ms • Selectable Switching Frequency from 600kHz, 800kHz, and 1000kHz • Non-Latch OCP, UVP, UVLO, Thermal Shutdown, and La...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)