Part Number ADS5294
Manufacturer Texas Instruments
Title Octal-Channel 14-Bit 80-MSPS High-SNR and Low-Power ADC
Description The ADS5294 is a low-power 80-MSPS 8-Channel ADC that uses CMOS process technology and innovative circuit techniques. Low power consumption, high ...
•1 Maximum Sample Rate: 80 MSPS/14-Bit
• High Signal-to-Noise Ratio
  – 75.5-dBFS SNR at 5 MHz / 80 MSPS
  – 78.2-dBFS SNR at 5 MHz / 80 MSPS and Decimation Filter Enabled
  – 84-dBc SFDR at 5 MHz / 80 MSPS
• Low Power Consumption
  – 58 mW/CH at 50 MSPS
  – 77 mW/CH at 80 MSPS (2-LVDS Wire Per Channel)
• Dig...

File Size 2.39MB
Datasheet ADS5294 PDF File

Similar Ai Datasheet

ADS5292 : Using CMOS process technology and innovative circuit techniques, the ADS5292 is a low power 80MSPS 8-Channel ADC. Low power consumption, high SNR, low SFDR, and consistent overload recovery allow users to design high performance systems. The ADS5292 has a digital processing block that integrates several commonly used digital functions for improving system performance. It includes a digital filter module that has built-in decimation filters (with low-pass, high-pass and band-pass characteristics). The decimation rate is also programmable (by 2, by 4, or by 8). This makes it useful for narrow-band applications, where the filters can be used conveniently to improve SNR and knock-off harmonics, .

ADS5295 : The ADS5295 is a low-power, 12-bit, 100-MSPS, 8channel analog-to-digital converter (ADC). Low power consumption and integration of multiple channels in a compact package make the device attractive for very high channel count data acquisition systems. Serial low-voltage differential signaling (LVDS) outputs reduce the number of interface lines and enable high system integration. The ADC digital data can be output over one or two wires of LVDS pins per channel. At high sample rates, the two-wire interface helps keep the serial data rate low, allowing low-cost field-programmable gate array (FPGA)-based receivers to be used. The device integrates an internal reference trimmed to accurately match.

ADS5296A : The ADS5296A is a low-power, 12-bit, 8-channel, analog-to-digital converter (ADC) with sample rates up to 80 MSPS. However, the device can also be configured to operate as a 4-channel ADC running at 2x the sample rate by interleaving data from two ADC channels. In interleaving mode, the device accepts a double frequency input clock. Each ADC in a pair converts a common analog input signal at alternate rising edges of the 2x input clock. The device can either be configured as a 10-bit, 4-channel ADC with sample rates up to 200 MSPS or as a 12-bit, 4channel ADC with sample rates up to 160 MSPS. The data from each ADC within the interleaved pair is output in serial format over one LVDS pair up .

Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)