DS1314

DS1312 : VCCI VCCO VBAT - +5V Power Supply Input - SRAM Power Supply Output - Backup Battery Input CEI - Chip Enable Input CEO TOL BW - Chip Enable Output - VCC Tolerance Select - Battery Warning Output (Open Drain) RST GND NC - Reset Output (Open Drain) - Ground - No Connection DESCRIPTION The DS1312 Nonvolatile Controller with Battery Monitor is a CMOS circuit which solves the application problem of converting CMOS RAM into nonvolatile memory. Incoming power is monitored for an outof-tolerance condition. When such a condition is detected, chip enable is inhibited to accomplish write protection and the battery is switched on to supply the RAM with uninterrupted power. Special circuitry uses .

DS1314 : VCCI VCCO VBAT - Power Supply Input - SRAM Power Supply Output - Backup Battery Input CEI - Chip Enable Input CEO TOL BW - Chip Enable Output - VCC Tolerance Select - Battery Warning Output (Open Drain) RST GND NC - Reset Output (Open Drain) - Ground - No Connection DESCRIPTION The DS1314 Nonvolatile Controller with Battery Monitor is a CMOS circuit which solves the application problem of converting CMOS RAM into nonvolatile memory. Incoming power is monitored for an outof-tolerance condition. When such a condition is detected, chip enable is inhibited to accomplish write protection and the battery is switched on to supply the RAM with uninterrupted power. Special circuitry uses a lo.

DS1315 : The DS1315 Phantom Time Chip is a combination of a CMOS timekeeper and a nonvolatile memory controller. In the absence of power, an external battery maintains the timekeeping operation and provides power for a CMOS static RAM. The watch keeps track of hundredths of seconds, seconds, minutes, hours, day, date, month, and year information. The last day of the month is automatically adjusted for months with fewer than 31 days, including leap year correction. The watch operates in one of two formats: a 12-hour mode with an AM/PM indicator or a 24-hour mode. The nonvolatile controller supplies all the necessary support circuitry to convert a CMOS RAM to a nonvolatile memory. The DS1315 can be int.

DS1318 : The DS1318 parallel-interface elapsed time counter (ETC) is a 44-bit counter that maintains the amount of time that the device operates from main and/or backup power or during an external event. The internal frequency of the counter clock is 4.096kHz, which provides a 244µs resolution and a maximum count of over 136 years. A built-in power-sense circuit detects power failures, automatically switches to the backup supply, and controls the timer. If an external event timer is desired, the control input EXT can control the counter operation. An open-drain output provides an interrupt, and a square-wave output provides a programmable square wave. The DS1318 is accessed through a bytewide paralle.