TL494

TL494 : The TL494 is a fixed–frequency pulse width modulation control circuit, incorporating the primary building blocks required for the control of a switching power supply. (See Figure 1.) An internal–linear sawtooth oscillator is frequency– programmable by two external components, RT and CT. The approximate oscillator frequency is determined by: fosc ≈ 1.1 RT • CT may be used to sense power–supply output voltage and current. The error–amplifier outputs are active high and are ORed together at the noninverting input of the pulse–width modulator comparator. With this configuration, the amplifier that demands minimum output on time, dominates control of the loop. When capacitor CT is discharged, a p.

TL494 : Switch mode Pulse Width Modulation Control Circuit TL494, NCV494 The TL494 is a fixed frequency, pulse width modulation control circuit designed primarily for switch mode power supply control. Features • Complete Pulse Width Modulation Control Circuitry • On−Chip Oscillator with Master or Slave Operation • On−Chip Error Amplifiers • On−Chip 5.0 V Reference • Adjustable Deadtime Control • Uncommitted Output Transistors Rated to 500 mA Source or Sink • Output Control for Push−Pull or Single−Ended Operation • Undervoltage Lockout • NCV Prefix for Automotive and Other Applications Requiring Site and Control Changes • Pb−Free Packages are Available* MAXIMUM RATINGS (Full operating ambient temper.

TL494 : The TL494 is used for the control circuit of the PWM switching regulator. The TL494 consists of 5V reference voltage circuit, two error amplifiers, flip flop, an output control circuit, a PWM comparator, a dead time comparator and an oscillator. This device can be operated in the switching frequency of 1 KHz to 300 KHz. 16-DIP 1 16-SOP 1 Internal Block Diagram Rev. 5.0 ©2000 Fairchild Semiconductor International TL494 Absolute Maximum Ratings Parameter Supply Voltage Collector Supply Voltage Output Current Amplifier Input Voltage Power Dissipation (TA = 25°C) Operating Temperature Range Storage Temperature Range Symbol VCC VC IO VIN PD TOPR TSTG Value 42 42 250 VCC + 0.3 1 (TL494CN) 0.

TL494 : The UTC TL494 incorporates all the functions required in the construction of a pulse-width modulation switching circuit. Designed primarily for switching power supply control or DC-DC convectors, it offers the systems engineer the flexibility to tailor control circuitry to its own application.  FEATURES * Complete PWM power control circuitry * Uncommitted outputs for 200mA sink or source current * Output control selects single ended or push pull operation * Internal circuitry prohibits double pulses over total range * Easy synchronization  ORDERING INFORMATION Ordering Number Lead Free Halogen Free TL494L-D16-T TL494G-D16-T - TL494G-S16-R - TL494G-P16-R Package DIP-16 SOP-16 TS.

TL494 : The TL494 incorporate on a single monolithic chip all the functions required in the construction of a pulse-width-modulation control, these devices offer the systems engineer the flexibility to tailor ORDERING INFORMATION Device Package the power supply control circuitry to his application. The TL494 contains an error amplifier, an on-chip adjustable oscillator, a dead-time control comparator, pulse-steering control TL494D TL494GD (Halogen Free) TL494N SOP16 16 DIP flip-flop, a 5-volt, 5% precision regulator, and output-control circuit. The error amplifier exhibits a common-mode voltage range from -0.3 volts to Vcc -2 volts. The dead-time control comparator has a fixed offset that.

TL494 : The TL494 device incorporates all the functions required in the construction of a pulse-widthmodulation (PWM) control circuit on a single chip. Designed primarily for power-supply control, this device offers the flexibility to tailor the power-supply control circuitry to a specific application. The TL494 device contains two error amplifiers, an on-chip adjustable oscillator, a dead-time control (DTC) comparator, a pulse-steering control flip-flop, a 5-V, 5%-precision regulator, and output-control circuits. The error amplifiers exhibit a common-mode voltage range from –0.3 V to VCC – 2 V. The dead-time control comparator has a fixed offset that provides approximately 5% dead time. The on-ch.

TL494B : Switch mode Pulse Width Modulation Control Circuit TL494, NCV494 The TL494 is a fixed frequency, pulse width modulation control circuit designed primarily for switch mode power supply control. Features • Complete Pulse Width Modulation Control Circuitry • On−Chip Oscillator with Master or Slave Operation • On−Chip Error Amplifiers • On−Chip 5.0 V Reference • Adjustable Deadtime Control • Uncommitted Output Transistors Rated to 500 mA Source or Sink • Output Control for Push−Pull or Single−Ended Operation • Undervoltage Lockout • NCV Prefix for Automotive and Other Applications Requiring Site and Control Changes • Pb−Free Packages are Available* MAXIMUM RATINGS (Full operating ambient temper.

TL494BDG : Switch mode Pulse Width Modulation Control Circuit TL494, NCV494 The TL494 is a fixed frequency, pulse width modulation control circuit designed primarily for switch mode power supply control. Features • Complete Pulse Width Modulation Control Circuitry • On−Chip Oscillator with Master or Slave Operation • On−Chip Error Amplifiers • On−Chip 5.0 V Reference • Adjustable Deadtime Control • Uncommitted Output Transistors Rated to 500 mA Source or Sink • Output Control for Push−Pull or Single−Ended Operation • Undervoltage Lockout • NCV Prefix for Automotive and Other Applications Requiring Site and Control Changes • Pb−Free Packages are Available* MAXIMUM RATINGS (Full operating ambient temper.

TL494C : Switch mode Pulse Width Modulation Control Circuit TL494, NCV494 The TL494 is a fixed frequency, pulse width modulation control circuit designed primarily for switch mode power supply control. Features • Complete Pulse Width Modulation Control Circuitry • On−Chip Oscillator with Master or Slave Operation • On−Chip Error Amplifiers • On−Chip 5.0 V Reference • Adjustable Deadtime Control • Uncommitted Output Transistors Rated to 500 mA Source or Sink • Output Control for Push−Pull or Single−Ended Operation • Undervoltage Lockout • NCV Prefix for Automotive and Other Applications Requiring Site and Control Changes • Pb−Free Packages are Available* MAXIMUM RATINGS (Full operating ambient temper.

TL494C : The TL494 device incorporates all the functions required in the construction of a pulse-widthmodulation (PWM) control circuit on a single chip. Designed primarily for power-supply control, this device offers the flexibility to tailor the power-supply control circuitry to a specific application. The TL494 device contains two error amplifiers, an on-chip adjustable oscillator, a dead-time control (DTC) comparator, a pulse-steering control flip-flop, a 5-V, 5%-precision regulator, and output-control circuits. The error amplifiers exhibit a common-mode voltage range from –0.3 V to VCC – 2 V. The dead-time control comparator has a fixed offset that provides approximately 5% dead time. The on-chi.

TL494CD : The TL494 device incorporates all the functions required in the construction of a pulse-widthmodulation (PWM) control circuit on a single chip. Designed primarily for power-supply control, this device offers the flexibility to tailor the power-supply control circuitry to a specific application. The TL494 device contains two error amplifiers, an on-chip adjustable oscillator, a dead-time control (DTC) comparator, a pulse-steering control flip-flop, a 5-V, 5%-precision regulator, and output-control circuits. The error amplifiers exhibit a common-mode voltage range from –0.3 V to VCC – 2 V. The dead-time control comparator has a fixed offset that provides approximately 5% dead time. The on-chi.

TL494CDG : Switch mode Pulse Width Modulation Control Circuit TL494, NCV494 The TL494 is a fixed frequency, pulse width modulation control circuit designed primarily for switch mode power supply control. Features • Complete Pulse Width Modulation Control Circuitry • On−Chip Oscillator with Master or Slave Operation • On−Chip Error Amplifiers • On−Chip 5.0 V Reference • Adjustable Deadtime Control • Uncommitted Output Transistors Rated to 500 mA Source or Sink • Output Control for Push−Pull or Single−Ended Operation • Undervoltage Lockout • NCV Prefix for Automotive and Other Applications Requiring Site and Control Changes • Pb−Free Packages are Available* MAXIMUM RATINGS (Full operating ambient temper.

TL494CN : Switch mode Pulse Width Modulation Control Circuit TL494, NCV494 The TL494 is a fixed frequency, pulse width modulation control circuit designed primarily for switch mode power supply control. Features • Complete Pulse Width Modulation Control Circuitry • On−Chip Oscillator with Master or Slave Operation • On−Chip Error Amplifiers • On−Chip 5.0 V Reference • Adjustable Deadtime Control • Uncommitted Output Transistors Rated to 500 mA Source or Sink • Output Control for Push−Pull or Single−Ended Operation • Undervoltage Lockout • NCV Prefix for Automotive and Other Applications Requiring Site and Control Changes • Pb−Free Packages are Available* MAXIMUM RATINGS (Full operating ambient temper.

TL494CN : The TL494 device incorporates all the functions required in the construction of a pulse-widthmodulation (PWM) control circuit on a single chip. Designed primarily for power-supply control, this device offers the flexibility to tailor the power-supply control circuitry to a specific application. The TL494 device contains two error amplifiers, an on-chip adjustable oscillator, a dead-time control (DTC) comparator, a pulse-steering control flip-flop, a 5-V, 5%-precision regulator, and output-control circuits. The error amplifiers exhibit a common-mode voltage range from –0.3 V to VCC – 2 V. The dead-time control comparator has a fixed offset that provides approximately 5% dead time. The on-chi.

TL494D : The TL494 incorporate on a single monolithic chip all the functions required in the construction of a pulse-width-modulation control, these devices offer the systems engineer the flexibility to tailor ORDERING INFORMATION Device Package the power supply control circuitry to his application. The TL494 contains an error amplifier, an on-chip adjustable oscillator, a dead-time control comparator, pulse-steering control TL494D TL494GD (Halogen Free) TL494N SOP16 16 DIP flip-flop, a 5-volt, 5% precision regulator, and output-control circuit. The error amplifier exhibits a common-mode voltage range from -0.3 volts to Vcc -2 volts. The dead-time control comparator has a fixed offset that.

TL494I : Switch mode Pulse Width Modulation Control Circuit TL494, NCV494 The TL494 is a fixed frequency, pulse width modulation control circuit designed primarily for switch mode power supply control. Features • Complete Pulse Width Modulation Control Circuitry • On−Chip Oscillator with Master or Slave Operation • On−Chip Error Amplifiers • On−Chip 5.0 V Reference • Adjustable Deadtime Control • Uncommitted Output Transistors Rated to 500 mA Source or Sink • Output Control for Push−Pull or Single−Ended Operation • Undervoltage Lockout • NCV Prefix for Automotive and Other Applications Requiring Site and Control Changes • Pb−Free Packages are Available* MAXIMUM RATINGS (Full operating ambient temper.