DatasheetsPDF.com

SK10EL16V

Semtech Corporation
Part Number SK10EL16V
Manufacturer Semtech Corporation
Description Differential Receiver with Variable Output Swing
Published Apr 8, 2005
Detailed Description HIGH-PER.ORMANCE PRODUCTS EDGE HIGH-PER.ORMANCE PRODUCTS Description The SK10/100EL16V is a differential receiver with v...
Datasheet PDF File SK10EL16V PDF File

SK10EL16V
SK10EL16V

Overview
HIGH-PER.
ORMANCE PRODUCTS EDGE HIGH-PER.
ORMANCE PRODUCTS Description The SK10/100EL16V is a differential receiver with variable output swing.
Its VCTRL input controls the amplitude of the Q and Q* outputs.
The operating range of the EL16V control input, VCTRL, is from VBB (large swing) to VCC (min swing), see Figure 2.
Simple control of the output swing can be obtained by a variable resistor between the VBB and VCC pins, with wiper driving CTRL.
Typical application circuits and results are described in Figures 1a, 1b, and 2.
The SK10/100EL16V provides a VBB output for either single-ended use or as a DC bias for AC coupling to the device.
The VBB pin should be used only as a bias for the EL16V as its current sink/source capability is limited.
Whenever used, the VBB pin should be bypassed to VCC via a 0.
01 µF capacitor.
Under open input conditions, the pulldown resistor on D, pulldown and pullup resistors on D* will force the Q output LOW and Q* output HIGH.
The VCTRL pin should be bypas...


Similar Datasheet


Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)