DatasheetsPDF.com

MAX1694

Maxim
Part Number MAX1694
Manufacturer Maxim
Description USB Current-Limited Switches
Published May 6, 2005
Detailed Description 19-1518; Rev 0; 9/99 USB Current-Limited Switches with Fault Blanking General Description The MAX1693/MAX1694 are curre...
Datasheet PDF File MAX1694 PDF File

MAX1694
MAX1694

Overview
19-1518; Rev 0; 9/99 USB Current-Limited Switches with Fault Blanking General Description The MAX1693/MAX1694 are current-limited, 60m Ω switches with built-in fault blanking.
Their accurate preset current limit of 0.
7A to 1.
0A makes them ideally suited for USB applications.
Their low quiescent supply current (14µA) and shutdown current (1µA) conserve battery power in portable applications.
The MAX1693/ MAX1694 operate with inputs from +2.
7V to +5.
5V, making them ideal for both +3V and +5V systems.
A fault signal notifies the microprocessor that the internal current limit has been reached.
A 10ms fault-blanking feature allows momentary faults (such as those caused when hot-swapping into a capacitive load) to be ignored, thus preventing false alarms to the host system.
This fault blanking also prevents a fault signal from being issued when the device is powering up.
In the MAX1693, an output overcurrent condition causes the switch to current limit at 0.
7A to 1.
0A and FAULT to go low after the 10ms blanking period.
When the overcurrent condition is removed, FAULT returns to its high-impedance state.
In the MAX1694, any overcurrent longer than 10ms will latch the switch open and set FAULT low.
The latch is cleared by cycling the ON input or by powering up the device again.
This feature saves power by preventing the device from thermally cycling on and off in case of a persistent short-circuit condition.
The MAX1693/MAX1694 have several safety features to ensure that the USB port is protected.
Built-in thermaloverload protection limits power dissipation and junction temperatures.
Both devices have accurate internal current-limiting circuitry to protect the input supply against overload.
They are available in space-saving 10-pin µMAX packages.
Features o Accurate Current Limit (0.
7A min, 1.
0A max) o Guaranteed 0.
75A Short-Circuit Protection o 10ms Internal Fault-Blanking Timeout o No Fault Signal During Power-Up o Latched FAULT Output Turns Off Power Switch (MAX1694) o...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)