DatasheetsPDF.com

DG213


Part Number DG213
Manufacturer TEMICs
Title Quad Complementary CMOS Analog Switch
Description The versatile DG213 analog switch has two NC and two NO switches. It can be used in various configurations, including four single-pole single-thro...
Features D D D D D D D "22-V Supply Voltage Rating TTL and CMOS Compatible Logic Low On-Resistance—rDS(on): 45 W Low Leakage—ID(on): 20 pA Single Supply Operation Possible Extended Temperature Range Fast Switching—tON: 85 ns Benefits D D D D D D D Low Charge Injection—Q: 1 pC Wide Analog Signal Range Simple...

File Size 98.62KB
Datasheet DG213 PDF File








Similar Ai Datasheet

DG211 : DG211, DG212 Data Sheet June 1999 File Number 3118.2 SPST 4-Channel Analog Switches The DG211 and DG212 are low cost, CMOS monolithic, Quad SPST analog switches. These can be used in general purpose switching applications for communications, instrumentation, process control and computer peripheral equipment. Both devices provide true bidirectional performance in the ON condition and will block signals to 30VP-P in the OFF condition. The DG211 and DG212 differ only in that the digital control logic is inverted, as shown in the truth table. Features • Switches ±15V Analog Signals • TTL Compatibility • Logic Inputs Accept Negative Voltages • rON (Max) . . ..

DG211 : The DG201A and DG211 are normally closed, quad single-pole single-throw (SPST) analog switches. These CMOS switches can be continuously operated with power supplies ranging from ±4.5V to ±18V. Maxim guarantees that these switches will not latch up if the power supplies are disconnected with input signals still connected. Both devices have guaranteed break-before-make switching. The DG201A differs from the DG211 primarily in switching speeds. The DG201A has a maximum turn-off time of 450ns and a maximum turn-on time of 600ns. The DG211 has a maximum turn-off time of 500ns and a maximum turn-on time of 1000ns. Compared to the original manufacturer’s products, Maxim’s DG201A and DG211 consume s.

DG211B : The DG211B/212B analog switches are highly improved versions of the industry-standard DG211/212. These devices are fabricated in Vishay Siliconix’ proprietary silicon gate CMOS process, resulting in lower on-resistance, lower leakage, higher speed, and lower power consumption. up to "22 V, and have an improved continuous current rating of 30 mA. An epitaxial layer prevents latchup. All devices feature true bi-directional performance in the on condition, and will block signals to the supply levels in the off condition. These quad single-pole single-throw switches are designed for a wide variety of applications in telecommunications, instrumentation, process control, computer peripherals, etc.

DG212 : The DG202/DG212 are normally open, quad singlepole single-throw (SPST) analog switches. These CMOS switches can be continuously operated with power supplies ranging from ±4.5V to ±18V. Maxim guarantees that these switches will not latch up if the power supplies are disconnected with input signals still connected. The DG202/DG212 are similar to the DG201/DG211 except for inverted control inputs. All devices have guaranteed break-before-make switching, as well as essentially constant on-resistance over the analog signal range. All switches conduct current in either direction and add no offset to the output signal. Compared to the original manufacturer’s products, Maxim’s DG202/DG212 consume ve.

DG212 : DG211, DG212 Data Sheet June 1999 File Number 3118.2 SPST 4-Channel Analog Switches The DG211 and DG212 are low cost, CMOS monolithic, Quad SPST analog switches. These can be used in general purpose switching applications for communications, instrumentation, process control and computer peripheral equipment. Both devices provide true bidirectional performance in the ON condition and will block signals to 30VP-P in the OFF condition. The DG211 and DG212 differ only in that the digital control logic is inverted, as shown in the truth table. Features • Switches ±15V Analog Signals • TTL Compatibility • Logic Inputs Accept Negative Voltages • rON (Max) . . ..

DG212B : The DG211B/212B analog switches are highly improved versions of the industry-standard DG211/212. These devices are fabricated in Vishay Siliconix’ proprietary silicon gate CMOS process, resulting in lower on-resistance, lower leakage, higher speed, and lower power consumption. up to "22 V, and have an improved continuous current rating of 30 mA. An epitaxial layer prevents latchup. All devices feature true bi-directional performance in the on condition, and will block signals to the supply levels in the off condition. These quad single-pole single-throw switches are designed for a wide variety of applications in telecommunications, instrumentation, process control, computer peripherals, etc.

DG213 : The versatile DG213 analog switch has two NC and two NO switches. It can be used in various configurations, including four single-pole single-throw (SPST), two single-pole double-throw (SPDT), one “T” switch, one DPDT, etc. This device is fabricated in a Vishay Siliconix’ proprietary highvoltage silicon gate CMOS process, resulting in lower onresistance, lower leakage, higher speed, and lower power consumption. This analog switch was designed for a wide variety of general purpose applications in telecommunications, instrumentation, process control, computer peripherals, etc. An improved charge injection compensation design minimizes switching transients. These switches can handle up to.




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)