DatasheetsPDF.com

MAX3462

Maxim
Part Number MAX3462
Manufacturer Maxim
Description +5V / Fail-Safe / 20Mbps / Profibus RS-485/ RS-422 Transceivers
Published Jun 13, 2005
Detailed Description 19-2217; Rev 1; 2/03 +5V, Fail-Safe, 20Mbps, Profibus RS-485/ RS-422 Transceivers General Description The MAX3460–MAX34...
Datasheet PDF File MAX3462 PDF File

MAX3462
MAX3462

Overview
19-2217; Rev 1; 2/03 +5V, Fail-Safe, 20Mbps, Profibus RS-485/ RS-422 Transceivers General Description The MAX3460–MAX3464 are high-speed differential bus transceivers for RS-485 and RS-422 communications.
They are designed to meet TIA/EIA-422-B, TIA/EIA-485-A, V.
11, and X.
27 standards.
The transceiver complies with the Profibus specification providing +2.
1V output level with a 54Ω load, 20Mbps data rate, and output skew less than 2ns.
Each part contains one three-state differential line driver and one differential input line receiver.
The devices operate from a +5V supply and feature true fail-safe circuitry, which guarantees a logic-high receiver output when the receiver inputs are open or shorted.
This enables all receiver outputs on a terminated bus to output logic highs when all transmitters are disabled.
All devices feature a 1/4 standard unit load receiver input impedance that allows 128 transceivers on the bus.
Driver and receiver propagation delays are guaranteed under 20ns for multidrop, clock distribution applications.
Drivers are short-circuit current limited and are protected against excessive power dissipation by thermal shutdown circuitry.
The driver and receiver feature active-high and active-low enables, respectively, that can be connected together externally to serve as a direction control.
o Guaranteed 20Mbps Data Rate o 20ns Transmitter and Receiver Propagation Delay o 2ns Transmitter and Receiver Skew o High Differential Driver Output Level (2.
1V on 54Ω) o Hot-Swap Versions o 1µA Shutdown Supply Current o Low Supply Current Requirements (2.
5mA typ) o Allow Up to 128 Transceivers on the Bus o True Fail-Safe Receiver while Maintaining EIA/TIA485 Compatibility o Designed for Multipoint Transmissions on Long or Noisy Bus Lines o Full Duplex and Half Duplex Versions Available o Phase Controls to Correct for Twisted-Pair Reversal for 14-Pin Versions o Current-Limiting and Thermal Shutdown for Driver Overload Protection Features o Recommended for Prof...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)