DatasheetsPDF.com

STR370 Datasheet PDF


Part Number STR370
Manufacturer ETC
Title REGULATOR
Description ...
Features ...

File Size 202.53KB
Datasheet STR370 PDF File








Similar Ai Datasheet

STR-4A60S : This device is sensitive gate triac suitable for direct coupling to TTL, HTL, CMOS and application such as various logic functions, low power AC switching applications, such as fan speed, small light controllers and home appliance equipment. STR4A60S Symbol ○ 2.T2 ▼▲ ○ 3.Gate 1.T1 ○ TO-126 321 Absolute Maximum Ratings ( TJ = 25°C unless otherwise specified ) Symbol Parameter Condition VDRM IT(RMS) ITSM I2t Repetitive Peak Off-State Voltage R.M.S On-State Current Surge On-State Current I2t TC = 95 °C One Cycle, 50Hz/60Hz, Peak, Non-Repetitive PGM PG(AV) IGM VGM TJ TSTG Peak Gate Power Dissipation Average Gate Power Dissipation Peak Gate Current Peak Gate Voltage Operating Junct.

STR-4A60S : This device is sensitive gate triac suitable for direct coupling to TTL, HTL, CMOS and application such as various logic functions, low power AC switching applications, such as fan speed, small light controllers and home appliance equipment. ABSOLUTE MAXIMUM RATINGS ( Ta = 25℃ ) Parameter Symbol Typ Unit Repetitive peak off-state voltages RMS on-state current Non-repetitive peak on-state current Max. Operating Junction Temperature Storage Temperature VVDRRRMM IT(RMS) ITSM 600 4.0 30 V A A Tj 110 ℃ Tstg -45~150 ℃ TO-126 ELECTRICAL CHARACTERISTICS ( Ta = 25℃ ) Parameter Symbol Test Conditions Min Typ Max Unit Repetitive peak off-state voltages VVDRRRMM — 600 — V RMS on-state .

STR-50115 : .

STR-50330 : .

STR-53041 : .

STR-54041 : .

STR-A27 : .

STR-A6000 : The STR-A6000 series are power ICs for switching power supplies, incorporating a MOSFET and a current mode PWM controller IC. The low standby power is accomplished by the automatic switching between the PWM operation in normal operation and the burst-oscillation under light load conditions. The product achieves high cost-performance power supply systems with few external components. Features • Current Mode Type PWM Control • Brown-In and Brown-Out function • Auto Standby Function No Load Power Consumption 25mW • Operation Mode Normal Operation ---------------------------- PWM Mode Standby --------------------------- Burst Oscillation Mode • Random Switching Function • Slope Compensation .

STR-A6000H : The STR-A6059H, STR-A6061H, STR-A6062H, and STR-A6069H are power ICs for switching power supplies, incorporating a power MOSFET and a current mode PWM controller IC in one package. To achieve low power consumption, these products include a startup circuit and a standby function in the controller. The switching modes are automatically changed according to load conditions: in normal operation, PWM mode, and in light load conditions, burst mode. The rich set of protection features helps to realize low component counts, and high performanceto-cost power supply. Applications: Switching power supplies for electronic devices such as: • Battery charger • Standby power supply • Small switch-mode pow.

STR-A6051M : The STR-A6000 series are power ICs for switching power supplies, incorporating a MOSFET and a current mode PWM controller IC. The low standby power is accomplished by the automatic switching between the PWM operation in normal operation and the burst-oscillation under light load conditions. The product achieves high cost-performance power supply systems with few external components. Features • Current Mode Type PWM Control • Brown-In and Brown-Out function • Auto Standby Function No Load Power Consumption 25mW • Operation Mode Normal Operation ---------------------------- PWM Mode Standby --------------------------- Burst Oscillation Mode • Random Switching Function • Slope Compensation .

STR-A6051M : The STR-A60xxM series are power ICs for switching power supplies, incorporating a power MOSFET and a current mode PWM controller IC. Including a startup circuit and a standby function in the controller, the product achieves low power consumption, low standby power, and high cost-effectiveness power supply systems with few external components. The STR-A60xxM internal MOSFET has a V DSS of 650 V(min) or 800 V(min), and an RDS(on) of 1.9 to 19.2 Ω with a frequency of 67 kHz. Power output is rated at 8 to 24 W at 230 VAC input and 5 to 20 W at wide input range (85 to 265 VAC). The device is provided in an industry-standard DIP-8 package, with pin 6 removed for increased isolation. Applications:.

STR-A6052M : The STR-A6000 series are power ICs for switching power supplies, incorporating a MOSFET and a current mode PWM controller IC. The low standby power is accomplished by the automatic switching between the PWM operation in normal operation and the burst-oscillation under light load conditions. The product achieves high cost-performance power supply systems with few external components. Features • Current Mode Type PWM Control • Brown-In and Brown-Out function • Auto Standby Function No Load Power Consumption 25mW • Operation Mode Normal Operation ---------------------------- PWM Mode Standby --------------------------- Burst Oscillation Mode • Random Switching Function • Slope Compensation .

STR-A6052M : The STR-A60xxM series are power ICs for switching power supplies, incorporating a power MOSFET and a current mode PWM controller IC. Including a startup circuit and a standby function in the controller, the product achieves low power consumption, low standby power, and high cost-effectiveness power supply systems with few external components. The STR-A60xxM internal MOSFET has a V DSS of 650 V(min) or 800 V(min), and an RDS(on) of 1.9 to 19.2 Ω with a frequency of 67 kHz. Power output is rated at 8 to 24 W at 230 VAC input and 5 to 20 W at wide input range (85 to 265 VAC). The device is provided in an industry-standard DIP-8 package, with pin 6 removed for increased isolation. Applications:.

STR-A6053M : The STR-A6000 series are power ICs for switching power supplies, incorporating a MOSFET and a current mode PWM controller IC. The low standby power is accomplished by the automatic switching between the PWM operation in normal operation and the burst-oscillation under light load conditions. The product achieves high cost-performance power supply systems with few external components. Features • Current Mode Type PWM Control • Brown-In and Brown-Out function • Auto Standby Function No Load Power Consumption 25mW • Operation Mode Normal Operation ---------------------------- PWM Mode Standby --------------------------- Burst Oscillation Mode • Random Switching Function • Slope Compensation .

STR-A6053M : The STR-A60xxM series are power ICs for switching power supplies, incorporating a power MOSFET and a current mode PWM controller IC. Including a startup circuit and a standby function in the controller, the product achieves low power consumption, low standby power, and high cost-effectiveness power supply systems with few external components. The STR-A60xxM internal MOSFET has a V DSS of 650 V(min) or 800 V(min), and an RDS(on) of 1.9 to 19.2 Ω with a frequency of 67 kHz. Power output is rated at 8 to 24 W at 230 VAC input and 5 to 20 W at wide input range (85 to 265 VAC). The device is provided in an industry-standard DIP-8 package, with pin 6 removed for increased isolation. Applications:.

STR-A6059H : The STR-A6000 series are power ICs for switching power supplies, incorporating a MOSFET and a current mode PWM controller IC. The low standby power is accomplished by the automatic switching between the PWM operation in normal operation and the burst-oscillation under light load conditions. The product achieves high cost-performance power supply systems with few external components. Features • Current Mode Type PWM Control • Brown-In and Brown-Out function • Auto Standby Function No Load Power Consumption 25mW • Operation Mode Normal Operation ---------------------------- PWM Mode Standby --------------------------- Burst Oscillation Mode • Random Switching Function • Slope Compensation .

STR-A6061H : The STR-A6000 series are power ICs for switching power supplies, incorporating a MOSFET and a current mode PWM controller IC. The low standby power is accomplished by the automatic switching between the PWM operation in normal operation and the burst-oscillation under light load conditions. The product achieves high cost-performance power supply systems with few external components. Features • Current Mode Type PWM Control • Brown-In and Brown-Out function • Auto Standby Function No Load Power Consumption 25mW • Operation Mode Normal Operation ---------------------------- PWM Mode Standby --------------------------- Burst Oscillation Mode • Random Switching Function • Slope Compensation .




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)